Marzocchi Z1 Free Ride Bedienungsanleitung

Z1 Free Ride

1/45

Features

TECHNICAL CHARACTERISTICS

Fork with Ø32 mm legs with spring and

hydraulic rebound damping.

Adjustment of the hydraulic rebound

braking through the knob on the top of the

right leg.

Adjustment of the air preload on the right

leg.

The ETA cartridge in the left leg makes it

possible to limit the extension blocking the

rebound of the fork.

The stanchion tubes are pressed into the

crown with a cryogenic process.

New sliding system to improve the stiffness

and operation.

Magnesium alloy cast one-piece assembly,

CNC machined for lighter weight and more

stiffness.

Components subjected to friction are

lubricated and cooled by means of a

special oil.

Steer tube: steel or reinforced aluminium,

1-1/8", threadless.

Crown: BAM® aluminium alloy forged and

CNC machined.

Stanchions: aluminium.

Springs: constant pitch.

Sliding bushes: made of friction free and

wear free material.

Seals: computer designed oil seals that

guarantee the maximum seal in any

condition.

Oil: special formulated oil that prevents

foam and keeps the viscosity unchanged

while offering high performance; free from

static friction.

Dropout type: Standard or (optional) QR20

Plus in the standard version or in the new

"With Bolt" version.

Disk brake mount: XC International

Standard for 6" disk.

Options: integrated fender.

BAM®: Bomber Aerospace Material:

special alloy coming from the aerospace

industry.

Z1 Free Ride

2/45

Features

Z1 Free Ride

3/45

Warning

INSTRUCTIONS FOR USE

GENERAL REGULATIONS

FITTING THE FORK ONTO THE FRAME

INSTALLING THE DISK BRAKE SYSTEM

ASSEMBLING THE FENDER

ASSEMBLING THE WHEEL ON FORKS WITH STANDARD DROPOUTS

ASSEMBLING THE WHEEL ON FORKS WITH QR20 PLUS DROPOUTS

ASSEMBLING THE WHEEL ON FORKS WITH QR20 "WITH BOLT" DROPOUTS

Z1 Free Ride

4/45

Warning

INSTRUCTIONS FOR USE

MARZOCCHI forks are based on an

advanced technology coming from the

company’s years long experience in the

professional mountain bike industry.

For the best results, it is advisable to

inspect and clean the area below the dust

seal and the stanchion tube after every use

and to lubricate the parts with some

silicone oil.

MARZOCCHI forks usually offer the best

performances since the very first rides.

Notwithstanding this, a short running-in

period may be necessary (5-10 hours) to

adjust the internal couplings. This

precaution will lengthen your fork’s life and

guarantee its best performances.

Changing the oil every 100 hours is

recommended.

The forks with a polished finish must be

treated periodically with polishing paste to

keep the exterior shining like new.

Z1 Free Ride

5/45

Warning

GENERAL REGULATIONS

· After a complete breakdown, always use

new MARZOCCHI seals when

reassembling.

· Before reassembly, wash all new and old

components and dry them with some

compressed air, making sure there are

neither breaks nor burrs.

· Never use flammable or corrosive

solvents to clean the parts as this could

damage the seals. If necessary use specific

detergents that are not corrosive, not

flammable or have a high flash point

compatible with the materials of the seals

and preferably biodegradable.

· Before reassembling, always lubricate the

parts of the fork in contact with some oil for

forks.

· Never pour lubricants, solvents or

detergents which are not completely

biodegradable in the environment; these

must be collected and kept in the relevant

special containers, then disposed of in

accordance with the regulations in force.

· Always grease the seal lips before

reassembling.

· Use only metric spanners and not

imperial. Imperial spanners may have

similar sizes to metric ones but they can

damage the bolts and screws making it

impossible to unscrew them.

· Use the right size and sort of screwdriver

to unscrew slotted or crosshead screws.

· When using a screwdriver to assemble or

dismantle metal stop rings, O-ring seals,

guide bushes or seal segments, avoid

scratching or cutting the components with

the tip of the screwdriver.

· Use only original spare parts.

· Before servicing the fork, we recommend

washing the fork thoroughly.

· Work in a clean, ordered and well-lit place.

· Carefully check there are no metal

shavings in the work area.

Z1 Free Ride

6/45

Warning

FITTING THE FORK ONTO THE FRAME

The fork is supplied with “A-Head Set” steer

tube to be cut according to frame size it will

be used on.

Fitting the fork onto the bike frame is a very

delicate operation that must be carried out

at one of our service centres only.

The assembling on the frame and the

adjustment of the steer tube must be

carried out following the instructions of the

steering set manufacturer.

A wrong installation can be dangerous

for the rider.

Marzocchi does not guarantee the

assembly and accepts no liability for

damage and/or accidents arising from a

wrong installation.

The steer tube must be pressed into the

crown; its replacement must be carried

out by one of our service centres using

the adequate tools.

A wrong installation of the steer tube

into the crown may cause the rider to

lose the control of the bike and lead to

serious personal injury.

Z1 Free Ride

7/45

Warning

INSTALLING THE DISK BRAKE SYSTEM

Installing the brake system is a very

delicate operation that must be carried out

at our specialised service centres only.

Marzocchi does not guarantee the

installation and accepts no liability for

damage and/or accidents arising from a

wrong installation

Improper installation of the disk brake

system can overstress the caliper

mountings, which may break. The

installation of the brake system must be

carried out following the instructions of

the brake system manufacturer.

Improper installation can be dangerous

for the rider.

Use only brake systems in accordance with

the fork’s specifications.

After installation always check that the

brake tube is correctly fixed to the

special mount (A).

Z1 Free Ride

8/45

Warning

ASSEMBLING THE FENDER

The fender can be supplied with the fork or

purchased separately.

Assemble the fender (A) by inserting the

small support bush (C) between the screw

and the fender as shown, and by tightening

the screws (B) with an 8mm hexagonal

spanner to the required torque (8±1 Nm).

Z1 Free Ride

9/45

Warning

ASSEMBLING THE WHEEL ON FORKS

WITH STANDARD DROPOUTS

Install the wheel following the

instructions of the bike’s manufacturer.

A good and reliable operation of the fork

and all of the parts linked to it mainly

depend on the correct fixing of the front

wheel.

For a correct operation of the fork, install

the wheel as explained below:

Check the correct fork-wheel alignment by

fully compressing the fork a few times.

Lift the front wheel above the ground; turn

the wheel a few times to verify the correct

alignment with the disk brake.

Z1 Free Ride

10/45

Warning

ASSEMBLING THE WHEEL ON FORKS

WITH QR20 PLUS DROPOUTS

A good and reliable operation of the fork

and all of the parts linked to it mainly

depend on the correct fixing of the front

wheel.

For a correct operation of the fork, install

the wheel as explained below:

· Unlock the locking device on both legs

pushing levers (A) downwards and opening

the small flap (P).

· For quick-release hubs, open the release

lever (B).

· For hubs with threaded cap, loose cap (C)

as much as needed to insert the wheel axle

through the wheel axle clamps.

· Insert the wheel axle (D) into the wheel

axle clamps.

· Check that the wheel axle supporting

bushes (E) are centred in the slider’s seat.

· If the wheel axle is equipped with a

quick-release system, lock the wheel with

the quick-release lever (B); otherwise, with

a 6mm Allen wrench, tighten the cap to the

side of the wheel axle to the recommended

tightening torque (see table - Tightening

torques).

· Verify the supporting bushes (E) stay

correctly.

· Check the correct fork-wheel alignment by

fully compressing the fork a few times.

the wheel a few times to verify the correct

alignment with the disk brake.

· Lock the locking device pulling levers (A)

upwards and adjust the clearance with the

adjusters (H), if necessary.

Inhaltsverzeichnis

Andere Marzocchi Fahrradzubehör Handbücher

Marzocchi

Marzocchi Z1 QR20 Bedienungsanleitung

Marzocchi

Marzocchi Bomber Bedienungsanleitung

Marzocchi

Marzocchi X-Fly Bedienungsanleitung

Marzocchi

Marzocchi Jr T 1999 Bedienungsanleitung

Marzocchi

Marzocchi Monster T Bedienungsanleitung

Marzocchi

Marzocchi Bomber 2000 Bedienungsanleitung

Marzocchi

Marzocchi MZ II 2006 Betriebsanleitung

Marzocchi

Marzocchi SHIVER Benutzerhandbuch

Marzocchi

Marzocchi 66 SL 150 Betriebsanleitung

Marzocchi

Marzocchi SHIVER 35 Bedienungsanleitung

Marzocchi

Marzocchi MX Comp ETA 2005 Betriebsanleitung

Marzocchi

Marzocchi MARATHON Bedienungsanleitung

Marzocchi

Marzocchi SHIVER SC Betriebsanleitung

Marzocchi

Marzocchi Bomber 58 Kurzanleitung

Marzocchi

Marzocchi EXR Coil Bedienungsanleitung

Marzocchi

Marzocchi Jr. T QR20 Bedienungsanleitung

Marzocchi

Marzocchi MXC Coil Bedienungsanleitung

Marzocchi

Marzocchi Dirt Jumper 1,5 QR20 Bedienungsanleitung

Marzocchi

Marzocchi Z1 Wedge ext. Preload Bedienungsanleitung

Marzocchi

Marzocchi Z3 QR20 Bedienungsanleitung

Marzocchi

Marzocchi Bomber 2002 Bedienungsanleitung

Marzocchi

Marzocchi Z3 QR20 Bedienungsanleitung

Marzocchi

Marzocchi Bomber Z1 BAM Bedienungsanleitung

Marzocchi

Marzocchi MXR Air Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung