MASSEY FERGUSON MF2800 Series Bedienungsanleitung

Operator Manual

VISION INNOVATION LEADERSHIP QUALITY RELIABILITY SUPPORT PRIDE COMMITMENT

MF2800

Series Round Baler

Models: 2846 / 2846A / 2856 / 2856A

TO OUR CUSTOMER:

Congratulations on your selection of a Massey Ferguson

Product.

We believe you have exercised excellent judgment in the purchase

of your Massey Ferguson

machine. We are most appreciative of your

patronage.

Your Dealer has performed the pre-delivery service on your new

machine.

He will discuss with you the operating and maintenance instructions

given in this manual, and instruct you in the proper and varied

applications of this machine. Call on him at any time when you have a

question or need equipment related to the use of your machine.

We recommend that you carefully read this entire manual before

operating the unit. Also, time spent in becoming fully acquainted with

its performance features, adjustments, and maintenance schedules

will be repaid in a long and satisfactory life of the product.

This equipment is covered by a written warranty which will be

provided to you by your Massey Ferguson

Dealer at time of purchase.

AGCO

reserves the right to make changes or add improvements to its products at any time without incurring

any obligation to make such changes to products manufactured previously. AGCO

, or its dealers, accept no

responsibility for variations which may be evident in the actual specifications of its products and the

statements and descriptions contained in this publication.

Massey Ferguson®is a worldwide brand of AGCO Corporation, Duluth, Georgia

CALIFORNIA

Proposition 65 Warning

WARNING: Diesel engine exhaust and some of its constituents are

known to the State of California to cause cancer, birth defects, and

other reproductive harm.

WARNING: Battery posts, terminals and related accessories contain

lead and lead compounds, chemicals known to the State of California

to cause cancer, birth defects, and other reproductive harm. Wash

hands after handling.

Find manuals at https://best-manuals.com

700734980 D Rev. A-i

CONTENTS

Original Instructions

MASSEY FERGUSON®

2846 / 2846A / 2856 / 2856A

700734980 D Rev.

CONTENTS

SAFETY ............................................................................................................................................................. A-1

GENERAL INFORMATION ................................................................................................................................ B-1

OPERATION ...................................................................................................................................................... C-1

ADJUSTMENTS ................................................................................................................................................ D-1

LUBRICATION AND MAINTENANCE ............................................................................................................... E-1

TROUBLESHOOTING ........................................................................................................................................ F-1

SPECIFICATIONS ............................................................................................................................................. G-1

ACCESSORIES AND OPTIONS ....................................................................................................................... H-1

ASSEMBLY ......................................................................................................................................................... J-1

INDEX ................................................................................................................................................................ K-1

Find manuals at https://best-manuals.com

CONTENTS

A-ii 700734980 D Rev.

NOTES

Find manuals at https://best-manuals.com

700734980 D Rev. A-1

SAFETY

Contents

Safety Alert Symbol ........................................................................................................................................ A-3

Safety Messages ............................................................................................................................................ A-3

Informational Messages .................................................................................................................................. A-3

Safety Signs .................................................................................................................................................... A-4

A Word To The Operator ................................................................................................................................ A-4

Operator Manual ............................................................................................................................................. A-5

Prepare For Operation .................................................................................................................................... A-6

Operation ........................................................................................................................................................ A-7

General Information .................................................................................................................................. A-7

PPE (Personal Protection Equipment) ..................................................................................................... A-8

Seat Instructions ....................................................................................................................................... A-9

Shield and Guards .................................................................................................................................... A-9

Exhaust Warning .................................................................................................................................... A-10

Flying Debris .......................................................................................................................................... A-10

Agricultural Chemicals ............................................................................................................................ A-10

Travel On Public Roads ................................................................................................................................ A-11

Maintenance ................................................................................................................................................. A-12

General Information ................................................................................................................................ A-12

Fire Prevention and First Aid .................................................................................................................. A-13

Checking for High Pressure Leaks ......................................................................................................... A-14

Tire Safety .............................................................................................................................................. A-15

Cylinder Stops .............................................................................................................................................. A-15

Safety and Informational Signs ..................................................................................................................... A-16

Safety Signs ........................................................................................................................................... A-18

Information Signs ................................................................................................................................... A-21

Find manuals at https://best-manuals.com

A-2 700734980 D Rev.

SAFETY

NOTES

Find manuals at https://best-manuals.com

700734980 D Rev. A-3

SAFETY

SAFETY ALERT SYMBOL

FIG. 1: The safety alert symbol means ATTENTION!

BECOME ALERT! YOUR SAFETY IS INVOLVED!

Look for the safety alert symbol both in this manual and

on safety signs on this machine. The safety alert symbol

will direct your attention to information that involves your

safety and the safety of others.

SAFETY MESSAGES

FIG. 2: The words DANGER, WARNING or CAUTION

are used with the safety alert symbol. Learn to recognize

these safety alerts and follow the recommended

precautions and safety practices.

mDANGER: Indicates an imminently

hazardous situation that, if not avoided, will

result in DEATH OR VERY SERIOUS

INJURY.

mWARNING: Indicates a potentially

hazardous situation that, if not avoided,

could result in DEATH OR SERIOUS

INJURY.

mCAUTION: Indicates a

potentially hazardous situation that, if not

avoided, may result in MINOR INJURY.

INFORMATIONAL MESSAGES

The words IMPORTANT and NOTE are not related to

personal safety, but are used to give additional

information and tips for operating or servicing this

equipment.

IMPORTANT: Identifies special instructions or

procedures which, if not strictly observed, could

result in damage to or destruction of the

machine, process, or its surroundings.

NOTE: Identifies points of particular interest for more

efficient and convenient repair or operation.

FIG. 1

Saf

FIG. 2

WC1957

Find manuals at https://best-manuals.com

SAFETY

A-4 700734980 D Rev.

SAFETY SIGNS

mWARNING: DO NOT remove or obscure

Danger, Warning or Caution signs. Replace

any Danger, Warning or Caution signs that

are not readable or are missing.

Replacement signs are available from your

dealer in the event of loss or damage. The

actual location of the safety signs is

illustrated at the end of this section.

Keep signs clean by wiping off regularly. Use a cleaning

solution if necessary.

If parts have been replaced or a used machine has been

purchased, make sure all safety signs are in the correct

location and can be read. Illustrations of safety sign

locations are located at the rear of this section.

Replace any safety signs that can not be read or are

missing. Clean the machine surface thoroughly with a

cleaning solution before replacing signs. Replacement

safety signs are available from your dealer.

A WORD TO THE OPERATOR

FIG. 3: It is YOUR responsibility to read and understand

the safety section in this manual and the manual for all

attachments before operating this machine. Remember

YOU are the key to safety. Good safety practices not only

protect you, but also the people around you.

Study the features in this manual and make them a

working part of your safety program. Keep in mind that

this safety section is written only for this type of machine.

Practice all other usual and customary safe working

precautions, and above all REMEMBER - SAFETY IS

YOUR RESPONSIBILITY. YOU CAN PREVENT

SERIOUS INJURY OR DEATH.

This safety section is intended to point out some of the

basic safety situations that may be encountered during

the normal operation and maintenance of your machine.

This section also suggests possible ways of dealing with

these situations. This section is NOT a replacement for

other safety practices featured in other sections of this

manual.

Personal injury or death may result if these precautions

are not followed.

Learn how to operate the machine and how to use the

controls properly.

Do not let anyone operate the machine without instruction

and training.

For your personal safety and the personal safety of

others, follow all safety precautions and instructions found

in the manuals and on safety signs affixed to the machine

and all attachments. Use only approved attachments and

equipment.

FIG. 3

S-1123

Find manuals at https://best-manuals.com

700734980 D Rev. A-5

SAFETY

Make sure your machine has the correct equipment

needed by the local regulations.

mWARNING: An operator should not use

alcohol or drugs which can affect their

alertness or coordination. An operator on

prescription or 'over the counter' drugs

needs medical advice on whether or not

they can properly operate machines.

mCAUTION: If any attachments used on this

equipment have a separate Operator

Manual, see that manual for other important

safety information.

OPERATOR MANUAL

This manual covers general safety practices for this

machine. The Operator Manual must always be kept with

the machine.

Right-hand and left-hand, as used in this manual, are

determined by facing the direction the machine will travel

when in use.

The photos, illustrations, and data used in this manual

were current at the time of printing, but due to possible

in-line production changes, your machine can vary slightly

in detail. The manufacturer reserves the right to redesign

and change the machine as necessary without

notification.

mWARNING: In some of the illustrations and

photos used in this manual, shields or

guards may have been removed for clarity.

Never operate the machine with any shields

or guards removed. If the removal of

shields or guards is necessary to make a

repair, they MUST be replaced before

operation.

Find manuals at https://best-manuals.com

SAFETY

A-6 700734980 D Rev.

PREPARE FOR OPERATION

Read and understand all operating instructions and

precautions in this manual before operating or servicing

the machine.

Make sure you know and understand the positions and

operations of all controls. Make certain all controls are in

neutral and the parking brake is applied before starting

the machine.

Make certain all people are well away from your area of

work before starting and operating the machine. Check

and learn all controls in an area clear of people and

obstacles before starting your work. Be aware of the

machine size and have enough space available to allow

for operation. Never operate the machine at high speeds

in crowded places.

Emphasize the importance of using correct procedures

when working around and operating the machine. Do not

let children or unqualified persons operate the machine.

Keep others, especially children, away from your area of

work. Do not permit others to ride on the machine.

Make sure the machine is in the proper operating

condition as stated in the Operator Manual. Make sure

the machine has the correct equipment required by local

regulations.

All equipment has a limit. Make sure you understand the

speed, brakes, steering, stability, and load characteristics

of this machine and the tractor before you start.

Find manuals at https://best-manuals.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MASSEY FERGUSON Landwirtschaftliche Geräte Handbücher

MASSEY FERGUSON

MASSEY FERGUSON 9125 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF9005 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 9186 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9100 Series Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON BETA 7360 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 1316S Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 1843S Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON Combines MF 7340 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 2140 - Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 1800 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 9700VER Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF2200 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9100 VE Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF5200 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 5650 Series Gebrauchsanweisung

MASSEY FERGUSON

MASSEY FERGUSON MF1474 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF5650 Advanced Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9226 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 9516 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9186 Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9316S Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 2430 Gebrauchsanweisung

MASSEY FERGUSON

MASSEY FERGUSON 9070 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung