MasterForce 240 -0021 Bedienungsanleitung

Page 1

10” Compact-Slide Miter Saw

240 -0021

For more information or to ask questions,

Call Toll-Free: (866) 902-9690

Monday-Friday between 8:30 AM and 5:00 PM ET

CAUTION:

To Reduce The Risk Of Injury, User Must Read

And Understand Operator’s Manual. Save These Instructions

For Future Reference.

QUICK START

Ratcheting Bevel Control

Tighten Bevel Lock:

A) Press lower part of inner

control tab to set ratcheting lever

to the tighten position.

B) Hold outer part of ratchet tab

and move lever up and down to

tighten the saw cutting head.

NOTE: Do not overtighten. Only

set tension to the required

setting to firmly hold the saw

cutting head in place.

Loosen Bevel Lock:

A) Press upper part of inner

control tab to set ratcheting lever

to the loosen position.

B) Hold outer part of ratchet tab

and move lever up and down to

loosen the saw cutting head.

NOTE: Loosen slowly and hold

cutting head securely. Only

loosen enough to move cutting

head into desired bevel setting.

Adjust Miter Angle:

A) Press down inner control

button.

B) Outer main lever should be in

the up position.

C) Rotate miter left or right to

desired angle.

Miter Control

A B

Miter Control

Lock Miter Angle:

A) Release inner control button

at desired angle.

B) Press down outer main lever

to set in locked position.

To set detent override:

A) Press down inner control

button completely and hold.

B) Push in button on left side

completely.

A) Release inner control button.

Miter Angle Quick-Detent Override

This saw has pre-set miter angle detents at frequently used angles:

0°, 15°, 22.5°, 31.6°and 45°- both left and right. To enable the

override feature to eliminate stopping at these pre-set detents,

follow the instructions below.

To release detent override:

A) Press down inner control

button completely and hold.

B) Pull out button on left side

completely.

A) Release inner control button.

Laser adjustment instruction

1. Remove the cover with a Philips screwdriver

2. If the laser line intersects the blade line, loosen the laser head fixture screw and turn

around the laser head to make the laser line parallel the blade line, tighten the laser

head fixture screw.

3. If the laser line is far from the blade line, loosen the laser base fixture screw and push the

laser base left or right to make the laser line (in the left) close to the blade line (in the right)

as close as possible, tighten the laser base fixture screw.

4. Reattach the cover with a Philips screwdriver

Blade

line

Laser

line

Blade

line

Laser

line

Blade

line

Laser

line

Blade

line

Laser

line

Inhaltsverzeichnis

Andere MasterForce Gesehen Handbücher

MasterForce

MasterForce 241-0740 Bedienungsanleitung

MasterForce

MasterForce 709-3912 Bedienungsanleitung

MasterForce

MasterForce 241-0433 Bedienungsanleitung

MasterForce

MasterForce 241-0428 Bedienungsanleitung

MasterForce

MasterForce SM3051M Bedienungsanleitung

MasterForce

MasterForce 241-0741 Bedienungsanleitung

MasterForce

MasterForce 241-0440 Bedienungsanleitung

MasterForce

MasterForce 241-0429 Bedienungsanleitung

MasterForce

MasterForce 15A Jobsite Table Saw Bedienungsanleitung

MasterForce

MasterForce 241-0746 Bedienungsanleitung

MasterForce

MasterForce Flex Power 241-0428 Bedienungsanleitung

MasterForce

MasterForce 709-3950 Bedienungsanleitung

MasterForce

MasterForce 241-0748 Bedienungsanleitung

MasterForce

MasterForce 241-0428 Bedienungsanleitung

MasterForce

MasterForce 240-0037 Bedienungsanleitung

MasterForce

MasterForce 241-0706 Bedienungsanleitung

MasterForce

MasterForce 240-0041 Gebrauchs- und Pflegehandbuch

MasterForce

MasterForce 709-3954 Bedienungsanleitung

MasterForce

MasterForce 709-3932 Bedienungsanleitung

MasterForce

MasterForce 240-0037 Bedienungsanleitung

MasterForce

MasterForce 241-0431 Bedienungsanleitung

MasterForce

MasterForce 240-0024 Bedienungsanleitung

MasterForce

MasterForce 241-0751 Bedienungsanleitung

MasterForce

MasterForce 241-0440 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung