Matsusada Precision EJC Series Bedienungsanleitung

MODEL EJC SERIES

Instruction Manual

Rev. 1.2

B/N 036.9.010 *036.9.010*

SAFETY

1. BE SURE TO GROUND!!

Be sure to ground the power supply unit before use.

2. DO NOT TOUCH ANY HIGH VOLTAGE TERMINALS!!

Do not operate the power supply unless someone who is familiar with the operation precede, the

hazards of high voltage, and the treatment for the electrical shock is present.

3. UNDERSTAND THE HAZARDS OF HIGH VOLTAGE!!

In case you let somebody operate the power supply for you, must be sure that he/she fully

understands the hazards of high voltage and the areas where never can be touched.

4. CUT OFF THE POWER BEFORE TOUCH THE UNIT!!

Cut off the power, and check that the power is OFF, before you touch the power supply.

Capacitors in the output circuit are still charged and dangerous even after the power has been

cut off.Discharge all remaining high voltage by grounding them.

5. DISCONNECT THE INPUT LINES(AC LINES) !!

In case you need to touch the inside of the power supply following instruction manual, cut off

the power and disconnect the input lines(AC lines), and ground all the capacitors and high

voltage section.

Don’t remove the case or touch the inside of power supply unless so instructed in the

instruction manual.

6. OPERATE THE POWER SUPPLY WITH YOUR RIGHT HAND!!

In order to avoid the electric shock to your important organs, operate the power supply with

your right hand and keep your left hand off from the power supply.

This power supply unit generates high voltage and energy.

Electric shock may lead to death or serious injury.

Be sure to follow the instructions below and handle the unit with caution.

Various symbols are used in this instruction manual and on the product for ensuring safety.

What will be caused by ignoring the instructions given with the symbols or by improper handling

are classified as shown below. Read carefully and understand the descriptions before

proceeding to the main body of this manual.

Symbols

Meanings of the Symbols

Some of the symbols used

are shown on the right.

Indicates that which requires caution.

Indicates that which forbidden.

Indicates that which must be done.

Indicates electric shock hazard.

failure to follow the instructions with this indication may lead to death or serious injury.

failure to follow the instructions with this indication may lead to injury or damage in property.

Warning:

Caution:

！



！



！



！



！



Warning

Do not touch the output terminal or the

leads or load connected to it while the

unit is in operation or immediately after it

is stopped. Otherwise it may cause

electric shock or injury.

Do not install the unit in a place subject

to steam or water vapor.

Otherwise it may cause poor insulation

and lead to fire or electric shock.

Do not install the unit in a place subject

to dew condensation.

Otherwise it may cause electric shock.

Do not modify or damage the cables.

Otherwise it may cause electric shock.

Be sure to ground the unit to avoid a rare

possibility of electric shock.

Otherwise it may lead to fire, electric

shock or injury.

Do not place any object on the unit.

Dangerous situations may occur if the

object drops or falls.

Do not put any object in the unit.

It may cause damage.

Do not disassemble, remodel or repair the

unit. High voltage may be built up inside,

which may cause electric shock.

Disassembly, remodeling or repair hamper

ensuring of safety and may lead to

dangerous situations.

Do not install the unit outdoors or in a

place subject to leaking of water, flood

or snow.

Otherwise it may cause electric shock.

DISASSEMBLY

GROUND

iii

■ After reading this manual, be sure to store it in a place convenient for the users so that it can be

referred to at anytime.

！



Caution

Do not install the unit upside down or

on a wrong side.

Insufficient heat release may cause

deterioration of parts, which may

generate smoke or set fire.

Do not use the unit in a place subject to

high temperature or in an enclosed,

limited area.

It not only hampers the unit from

achieving its performance but also

causes deterioration of parts leading to

smoking or burning.

Do not wipe the unit with chemicals

(such as thinner) or wet cloth.

It may allow water inside leading to

electric shock, electrical leak or burning.

Do not cover the vent holes of the unit.

Vent holes are provided to prevent

elevation of temperature inside.

Covering them not only hampers the unit

from achieving its performance but also

causes deterioration of parts, which may

generate smoke or set fire.

Do not install the unit and the remote

controller in a place subject to direct

cold air. Condensation may lead to

electrical leak/burning.

Do not install the unit in a place subject

to corrosive gas or liquid (such as a

place where chemicals are handled).

Deterioration of parts may cause

generation of smoke or burning.

NO NO

RESCUE

1. Free victim from contact with live conductor quickly.

Avoid contact with neither live conductor nor victim’s body.

2. Shut off high voltage at once and ground the circuit. If high voltage cannot be turned off

quickly, ground the circuit to discharge, or cut high voltage line by an ax with dry wooden

handle. Be careful of electric flash.

3. If circuit cannot be broken or grounded, use a dry board, dry clothing, or other

nonconductor to free victim.

4. Call an ambulance immediately.

SYMPTOMS

NEVER TAKE ELECTRICALLY SHOCKED CONDITION AS DEATH.

Symptoms of electric shock may include unconsciousness, failure to breathe, absence of

pulse, pallor, and stiffness, as well as severe burns.

Whenever victim is not breathing properly, give artificial respiration(see next page).

TREATMENT

1. Start artificial respiration at scene of accident. Only in case victim’s or

operator’s life is endangered, remove victim to safe location nearby.

2. After starting artificial respiration, continue without loss of rhythm until victim start

breathing without help, or being passed to medical aid.

3. When operator change while giving artificial respiration, do so without losing the

rhythm of respiration.

4. After giving first aid, try to get a diagnosis by a doctor as soon as possible because

shock can cause internal burn, which can be lethal if left untreated.

AFTER VICTIM REVIVES

Be prepared to resume artificial respiration, as he may stop breathing again.

Keep victim warm and lying down until he or she has been conscious for at least thirty minutes.

First-aid procedures to be implemented in case of electrical shock

1. PLACE VICTIM

Place victim in face-upward position horizontally.

2. CLEAR THROAT

Turn head to one side quickly wipe out any fluid, mucus, or

foreign body from mouth and throat with fingers.

3. OPEN AIR PASSAGE

Tilt head back and extend neck to open air passage.

4. LIFT JAW FORWARD

Put thumb in victim’s mouth and grasp jaw firmly. Lift jaw

forward to pull tongue out of air passage. Do not hold or depress

tongue.

5. PINCH NOSTRILS CLOSED

With other hand pinch nostrils closed to prevent air leak.

6. BLOW AIR IN

Take a deep breath, seal victim’s open mouth and exhale firmly into

victim’s mouth until chest is seen to lift.

Make sure to open mouth widely to avoid air leakage.

7.REMOVE MOUTH AND CHECK

Check the sound of breathing out air and see normal breathing

when releasing mouth. If no sound, repeat from OPEN AIR

PASSAGE. Continue at a rate of 12 to 20 times per minute.

Quantity of air have to be increased gradually. Especially when victim is infant, be carefully not to be

too strong, not to blow in too much air.

Keep giving artificial respiration until victim start breathing without help, or being passed to medical

aid.

Artificial respiration

7.Remove mouth and

check

6.Blow air in

3.Open air

passage

2.Clear throat

1. WARRANTY POLICY

Matsusada Precision Inc. ("Matsusada") warrants that the products supplied by it will be free from

defects in materials and workmanship for a period of twelve (12) months from the date of original

shipment to buyer. This warranty shall not apply to any product which has been repaired, modified

or worked on by persons unauthorized by Matsusada, used other than in accordance with the

instruction manuals, used in inappropriate environment (with corrosive gas, high humidity, etc) or

damaged by any event beyond Matsusada's control such as force majeure. Matsusada shall in no

way be liable for any incidental, special or consequential damages relating to this warranty.

Matsusada's sole liabilities and the buyer's sole remedies shall be limited, at Matsusada's discretion,

to a repair or replacement of the products.

The foregoing warranty is in lieu of all other warranties, express or implied, including those of

merchantability or fitness for a particular purpose.

As the products are not designed and manufactured for applications which require extraordinary

reliability or safety, or affecting people's life (nuclear energy, aerospace, socially fundamental

facility, medical equipment, etc), this warranty shall not be applied for such applications. The

specific design and manufacturing might be required for such applications.

No modification or supplement of this warranty shall be binding unless in writing and signed by a

duly authorized officer of Matsusada.

2. INSTRUCTION MANUAL AND TEST DATA

・Each rack mount and bench top power supply have 1 instruction manual. Extra instruction manuals

available with charge.

・Schematics of products shall not be submitted to users. Test result or test data for the products

shall be available upon request with charge.

WARRANTY

１ Introduction

1Introduction

１－１ Introduction

Thank you very much for your purchase of our product HIGH VOLTAGE POWER SUPPLY. We

have done our best for the quality control of the unit.

Please handle this unit properly according to this instruction manual so that you can use the full

performance of this unit safely for long.

We have carefully prepared this instruction manual, but if you find any doubtful or

unclear point or any omission, please kindly contact us shortly.

１－２ Unpacking the POWER SUPPLY

When unpacked the unit, you will please check the following accessories are enclosed with

power supply main body.

〈Accessories〉

・ AC input cord (1 pc)

・ Instruction manual (1 pc)

・ Output Cable (1 pc)

・ D –sub connector (1 pc)

・ Cover for D –sub connector (1 pc)

１－３ Installation conditions

・ Install the power supply unit horizontally when use

・ Do not put any object on the power supply unit.

・ The top and side surfaces are the cooling air supply and exhaust openings. The power

supply must be provided with adequate space and good ventilation.

・ Do not operate the power supply in a dusty area or in corrosive gas environment

1-4 Caution for handling

・ For your safety, make sure to connect the GROUND terminal of the case to earth.

・ The earth of case or load shall be grounded at one point on the ground with thick and short

wire.(more than 5SQ)

・ Connect the shielded wire of output cable to the chassis side.(This is for protection of power

supply of electrical shock against arc or discharge.)

・ Do not touch the load right after turning off the output. Before touching the load make

sure if POWER ON/OFF switch is off, and that the output voltage is 0 with output voltage

meter of this unit or with other voltage meter, or ground the output.

１－５ Troubleshooting

・No output voltage

１．Check if the specified voltage is input.

・ Power supply input voltage, AC +/-10%, 50/60Hz single phase

・ Control voltage in external voltage controlling is –10 to +10V.

２．Check if the connection of control on the rear panel is properly connected.

３．Check if the function of option is properly operated.

NOTE: AC input cord for 115VAC input type and 230VAC input type is different.

The cord for 115VAC input type can be used for standard outlet.

The cord for 230VAC input type have to be installed with switch board of

commercial supply with solderless terminal or something.

Switch board should be connected as -

NEUTRAL = BLUE

LINE = BROWN

GND( ) = YELLOW/GREEN

１ Introduction

How to ground

Output cable

GROUND terminal

Ground

Chassis

Handy Chassis

2 Exterior view diagram

Output connector

GROUND terminal

FUSE(3A)

Input connector

Fan

Control connector

GND

FUSE

Adj.

NORMAL

REVERSE

POWER HV

REMOTE

LOCAL

CONTROL

Output setting dial Output polarity change

switch (-LPo option)

POWER ON/OFF switch

HV ON/OFF switch

Local / Remote

change switch

Output voltage meter,

Current meter

Voltage,

Current display

change switch

Inhaltsverzeichnis

Andere Matsusada Precision Stromversorgung Handbücher

Matsusada Precision

Matsusada Precision RK-80 Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision R4G Series Installationsanleitung

Matsusada Precision

Matsusada Precision DOP Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision AMP Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision DOEF Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision eK-FGJ Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision AMJ Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision EGS Series Installationsanleitung

Matsusada Precision

Matsusada Precision VOL Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision RK Series Installationsanleitung

Matsusada Precision

Matsusada Precision R4K-80 Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision PZM-0.12BS Bedienungsanleitung

Matsusada Precision

Matsusada Precision DRK Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision PRT Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision DOSF Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision R4K-36 Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision RKT Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision DRS Series Installationsanleitung

Matsusada Precision

Matsusada Precision DOPF Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision VOL Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision ECA Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision REK Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision EPR Series Bedienungsanleitung

Matsusada Precision

Matsusada Precision PSS2en-DCPS Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung