Maxtor MaxAttach NAS 6000 Technisches Handbuch

Revision 2.0.03A 1 000001576

MaxAttach NAS 6000

Quick Start Card

This Quick Start Card is only for a single MaxAttach NAS 6000 Base Unit

enclosed within a cabinet or a single rack-mountable Base Unit. For other

configurations, see the MaxAttach NAS 6000 Installation and Configuration Guide

on the enclosed MaxAttach NAS 6000 Installation and Documentation CD.

Welcome to the

MaxAttach NAS 6000

Thank you for choosing a MaxAttach NAS

6000 system. Take a moment to verify the

contents in your box and note the model

and serial numbers for future reference.

The procedures outlined here assume that

you have purchased a MaxAttach NAS

6000 Base Unit system enclosed within a

cabinet, or a rack-mountable MaxAttach

Base Unit system, and that you are highly

familiar with networking and system

administration basics. If not, please refer to either the appropriate Getting Started

Guide based on your system’s configuration, or the Installation and Configuration

Guide on the enclosed CD.

Box Contents

Equipment:

nMaxAttach NAS 6000 file server (with rack mount hardware if required)

nEMU/CPU Serial Cable (for rack mount systems)

nTw o A C p o w e r c o r d s

Revision 2.0.03A 2 000001576

Documentation:

nQuick Start Card

nMaxAttach NAS 6000 End User License Agreement (EULA)

nMaxAttach NAS 6000 Release Notes

nMaxAttach NAS 6000 Installation and Documentation CD containing:

nMaxNeighborhood Discovery and Setup Wizard application

nMaxAttach NAS 6000 Documentation

nStandalone O/S Help Files

1: Unit Information

Please record the following information from your system:

nModel Number:_______________________________

nSerial Number:________________________________

2: Installation Requirements

Client Workstation

nMicrosoft Windows O/S 95, 98, Me, NT (SP5), or 2000

nInternet Explorer version 5.01 or higher; version 5.5 or higher recommended

n10/100 Mbps Ethernet NIC card

nClient for Microsoft Networks enabled over TCP/IP

nCD-ROM drive

User Supplied Equipment

nAll systems: two CAT-5 and/or one Fiber Connection NIC cable/s

nRack-mount systems only: standard 19” rack with at least 4U space, two AC

power strips

3: Installation

Rack Mount Systems Only:

1. Mount in rack with provided hardware.

2. Install two power supply cords and

connect to power strips.

3. Install EMU cable between CPU I/O

Panel and EMU port as shown at right.

All Systems:

4. Connect the MaxAttach to your network using at least one NIC cable.

5. Make sure back panel switches are both “OFF” or “0” position. Route AC

power strip cords to AC power source.

Revision 2.0.03A 3 000001576

4: Reseat All Hard Disk Drives

Reseat each hard drive to make sure shipping vibration has not dislodged them. Be

sure to replace the drive in its original as-shipped Drive Bay.

1. Press down on the Ejector Tab and lift up on the Ejector Lever.

2. Pull the drive out of its Drive Bay (now is a good time to record the drive type

and serial number) and then replace the drive in its Drive Bay until it begins to

engage the connector. Close the Ejector Lever to lock in place.

5: Power Up Your System

1. Make sure the both back panel ON/OFF rocker switches are in the ON or “|”

position.

2. Press the front panel power rocker switch. The green Disk Activity LED on

each disk drive and the green System Status LED in the middle of the Base Unit

front panel will beging to blink for several minutes.

3. When the system has completed its boot process, the Disk Activity LEDs will

go out and the Stystem Status LED will stay on. Your MaxAttach is ready to

configure.

6: Install MaxNeighborhood Software

1. Insert the CD labeled MaxAttach NAS 6000 Installation and Documentation CD

into your CD-ROM drive. If the MaxAttach menu does not appear shortly

after insertion, use Windows Explorer to locate the CD drive and launch the

Setup file on the CD.

2. From the opening screen, select the Install MaxNeighborhood

button. Follow the

step-by-step instructions carefully.

3. When the installation is complete, select the option to launch

MaxNeighborhood and then click on the Finish button. A MaxNeighborhood

window will appear with a “SEARCHING, Please Wait...” message. When the

search is complete, the MaxAttach unit/s on your network will be listed.

7: Configure Your MaxAttach

1. If you have DHCP service on your network, skip to step #3 below.

2. Select the MaxAttach unit you just installed by single clicking the factory

default server name. The default server name will begin with the letters “MA.”

3. Select the Change Settings button. Enter the desired IP Address, Net Mask,

Gateway, and set DHCP Client to Disabled.

Revision 2.0.03A 4 000001576

4. Click on Apply to commit the changes. The server will automatically reboot.

5. Close the Change Settings window. After the system has rebooted, press the

Refresh button.

6. The factory default server name will begin with the letters “MA.” In the

MaxNeighborhood window, double-click on the default server name. Your

web browser will launch and display a login screen.

7. Enter the login name “Administrator” (without the quotes) and leave the

password blank. Select the “Administer this server appliance” link. A second

identical login will be required.

8. The First Time Setup Wizard will start and guide you through key configuration

steps: setting the date and time, assigning the administrator password, setting up

email alert notifications, assigning a server name, and helping you change global

network settings. Depending on the changes made, you may be instructed to

reboot your system.

9. Once rebooted, you MaxAttach NAS 6000 is ready for use or for advanced

configuration.

8: Register for On-Site Support

pleased to provide standard Next Business Day on-site service for your MaxAttach

and wish to ensure that your service is activated. If you have not already received a

service activation contract from Maxtor, please contact 1-800-4MAXTOR or

visit our web site at www.MaxAttach.com. Should you have any questions about

activating your MaxAttach, please do not hesitate to contact us. Thank You

9: Worldwide Support Contacts

Technical support is available worldwide.

nUnited States: 1-800-4MAXTOR, www.MaxAttach.com

nUnited Kingdom, France, Italy, Spain, Portugal, and Denmark: +353 1 204 11

11 (Ireland), EuroNSG@Maxtor.com

nGermany: +49 (0) 89 96241919, EuroNSG@Maxtor.com

nAsia Pacific: +852-2585-4500, ApacNSG@Maxtor.com

MaxAttach™ and MaxNeighborhood™ are trademarks of Maxtor Corporation. Other product names,

company names, and logos are trademarks or registered trademarks of their respective owners.

Specifications are subject to change without notice. Maxtor reserves the right to revise this publication

and to make changes in the content hereof without the obligation of Maxtor to notify any person of such

revision or changes.

11 /0 9 / 01

Inhaltsverzeichnis

Andere Maxtor Netzwerkspeicherserver Handbücher

Maxtor

Maxtor Maxtor Central Axis Bedienungsanleitung

Maxtor

Maxtor Maxtor Central Axis Bedienungsanleitung

Maxtor

Maxtor Maxtor Central Axis Bedienungsanleitung

Maxtor

Maxtor MaxAttach NAS 3000 Bedienungsanleitung

Maxtor

Maxtor Maxtor Central Axis Bedienungsanleitung

Maxtor

Maxtor MaxAttach NAS 4100 Technisches Handbuch

Maxtor

Maxtor NAS 6000 Bedienungsanleitung

Maxtor

Maxtor NAS 6000 Bedienungsanleitung

Maxtor

Maxtor Maxtor Central Axis Bedienungsanleitung

Maxtor

Maxtor NS-349S Bedienungsanleitung

Maxtor

Maxtor Maxtor Central Axis Bedienungsanleitung

Maxtor

Maxtor Maxtor Central Axis Bedienungsanleitung

Maxtor

Maxtor STM310004SDAB0G-RK - Maxtor Shared Storage II NAS... Bedienungsanleitung

Maxtor

Maxtor MaxAttach NAS 3000 Bedienungsanleitung

Maxtor

Maxtor MaxAttach NAS 4000 Bedienungsanleitung

Beliebte Netzwerkspeicherserver Handbücher anderer Marken

HP NetStorage 6000 Bedienungsanleitung

Seagate

Seagate U10 ST320423A Bedienungsanleitung

Synology

Synology RackStation RS816 Handbuch

D-Link

D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung

Avid Technology

Avid Technology VideoRAID ST Sicherheitsleitfaden

Western Digital

Western Digital My Cloud Home Duo Bedienungsanleitung

PrimeArray

PrimeArray 4xxx Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung

Planex

Planex MZK-NAS01SG Bedienungsanleitung

Intel

Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung

Synology

Synology RS2212+ Bedienungsanleitung

Allnet

Allnet ALL69000 Bedienungsanleitung

Adaptec

Adaptec 5325301580 Bedienungsanleitung

Motorola

Motorola EXORdisk II Bedienungsanleitung

Sony

Sony XDAAI1PK Bedienungsanleitung

Cisco

Cisco Linksys NAS200 Original Betriebsanleitung

Sans Digital

Sans Digital MR4UT6G Bedienungsanleitung

AIC

AIC FB128-LX Bedienungsanleitung