Maxwell AutoAnchor 730 Bedienungsanleitung
1
AutoAnchor 730 Owner’s Manual
Part 1 Important Information 2
Part 2 Installation 4
Part 3 Set Up 17
Part 4 Operation 28
Part 5 Maintenance 38
Part 6 Troubleshooting 38
Index
TABLE OF CONTENTS
To the best of our knowledge the information in this manual was correct at the time
of printing. However, the AutoAnchor products are continuously being reviewed and
LPSURYHGDQGSURGXFWVSHFL¿FDWLRQVPD\EHFKDQJHGZLWKRXWQRWLFH7KHODWHVWSURGXFW
VSHFL¿FDWLRQVPD\QRWEHUHÀHFWHGLQWKLVYHUVLRQRIWKHPDQXDO7KHGRFXPHQWDWLRQ
relating to the AutoAnchor products is created in the English language and may be
WUDQVODWHGIURP(QJOLVKWRDQRWKHUODQJXDJH,QWKHHYHQWRIDQ\FRQÀLFWEHWZHHQ
WUDQVODWHGGRFXPHQWVWKH(QJOLVKODQJXDJHYHUVLRQZLOOEHWKHRI¿FLDOYHUVLRQ
AutoAnchor documents are available on the website www.autoanchor.co.nz
2
7KH$$VKRXOGRQO\EHLQVWDOOHGE\DTXDOL¿HGPDULQHHOHFWULFLDQ'RQRW
DWWHPSWWRLQVWDOOWKH$$XQOHVV\RXDUHVXLWDEO\TXDOL¿HG
7KLVPDQXDOVXSSRUWVWKHXVHRIWKH$$RQO\7KHDSSURSULDWHPDQXIDFWXUHU¶V
LQVWUXFWLRQVPXVWEHIROORZHGIRUWKHLQVWDOODWLRQDQGXVHRIWKHHTXLSPHQWWKH
$$LVVHWXSWRFRQWURO
7KHUHPXVWEHDQDOWHUQDWLYHPHWKRGDYDLODEOHWRRSHUDWHWKHZLQGODVVWKUXVWHURU
RWKHUHTXLSPHQW
7KH$$FDQEH¿WWHGWRPRVWYHUWLFDOZLQGODVVHV$KRUL]RQWDOZLQGODVVPD\
UHTXLUHDVHQVRUKROGHURUDFXVWRPGHVLJQHGVHQVRUZKLFKLVQRWLQFOXGHGLQWKH
standard pack. Check with your supplier or the AutoAnchor manufacturer.
)RUFKDLQFRXQWLQJWKH$$PXVWEH¿WWHGWRDZLQGODVVZLWKDGXDOGLUHFWLRQ
control box or solenoid pack.
,QIRUPDWLRQIRULQVWDOODWLRQDQGRSHUDWLRQRIWKH$$LVVXSSOLHGLQFOXGLQJ
SUHVHWZLQGODVVSUR¿OHOLVWVZLULQJGLDJUDPVWKH2ZQHU¶V0DQXDODQG
the Quick User Guide. All documents must be left on board for the owner.
1RQFRPSOLDQFHZLWKWKHLQVWUXFWLRQVFRXOGLPSDLURSHUDWLRQRIWKH$$WKH
ZLQGODVVWKUXVWHURURWKHUHTXLSPHQWDQGFRXOGUHVXOWLQSHUVRQDOLQMXU\DQGRU
damage to the boat.
1RQFRPSOLDQFHZLWKWKHLQVWUXFWLRQVZLOOQHJDWHWKHPDQXIDFWXUHU¶VZDUUDQW\
7KH$$PDQXIDFWXUHUDQGVXSSOLHUDFFHSWQROLDELOLW\IRUSHUVRQDOLQMXU\RU
property damage resulting from failure to follow the installation and operation
LQVWUXFWLRQVRUWKHXVHRIWKH$$LQDZD\WKDWPD\FDXVHDFFLGHQWVRU
damage or that may violate the law.
$OOWKHWHFKQLFDODQGFDEOHVSHFL¿FDWLRQVPXVWEHFKHFNHGDQGDGKHUHGWRDQG
ZLULQJGLDJUDPVPXVWEHIROORZHGZLWKRXWPRGL¿FDWLRQ
%HIRUHXVHWKH$$PXVWEHFRUUHFWO\VHWXSIRUDOOWKHHTXLSPHQWLWLVWRFRQWURO
DQGWHVWHGLQDVDIHHQYLURQPHQW7KH$$ZLOOQRWFRXQWFRUUHFWO\LIWKH
windlass selection is wrong or the windlass is not standard (eg it is installed
with a different chainwheel or motor).
$OOLQVWDOODWLRQVPXVWEHFDUULHGRXWLQDFFRUGDQFHZLWK86&*$%<&100$DQG
%0($UHTXLUHPHQWV
:KHQWKLVSURGXFWUHDFKHVWKHHQGRILWVXVHIXOOLIHLWPXVWEHGLVSRVHGRILQ
accordance with local regulations.
Information is also available on www.autoanchor.co.nz
PART 1 IMPORTANT INFORMATION
READ BEFORE INSTALLING OR USING THE AUTOANCHOR
3
TECHNICAL SPECIFICATIONS
Parameter AA730 Remote Console AA703 Base Station
Current Consumption P$ P$
3RZHU6XSSO\ 99'&
0D[LPXP9ROWDJH 9'&
2XWSXW0D[LPXP
&XUUHQW'UDZ
9'&$
9'&$
The system has internal current limiting and thermal shutdown.
2XWSXW0LQLPXP
&XUUHQW'UDZ
9'&P$
9'&P$
IP Rating ,3
2SHUDWLQJ7HPSHUDWXUH
Range o)WRo)o&WRoC)
2XWSXWV 6
6\VWHP6XSSRUWV 1 base station and 1 console.
5RGH&KDLQ2QO\ 6WDLQOHVVRUJDOYDQLVHGVWHHO
Rode - Rope and Chain 0XVWKDYHDPLQLPXPRIIWPRIFKDLQ&KDLQPXVWEH
JDOYDQLVHGVWHHO5RSHVKRXOGEHDJRRGTXDOLW\Q\ORQDQFKRU
URSH7\SHRUHTXLYDOHQW
'&ZLQGODVVHVUHTXLUHDGXDOGLUHFWLRQVROHQRLG
ELECTROMAGNETIC COMPATIBILITY (EMC)
FCC Information:
7KLVGHYLFHFRPSOLHVZLWK&)53DUWRI)&&5XOHVIRU&ODVV%HTXLSPHQW
ESTI Information (CE):
7KLVGHYLFHPHHWVWKHUHOHYDQWVWDQGDUGVVHWRXWLQ(XURSHDQ6WDQGDUG(1IRU
PDULWLPHQDYLJDWLRQDQGUDGLRFRPPXQLFDWLRQHTXLSPHQWDQGV\VWHPVThese standards
are intended to provide reasonable protection against interference by other emission
generating products on the boat. Compliance with these standards is no guarantee that
interference will not occur in a particular installation. The installation instructions must be
followed to minimise the potential for interference.
Note: If shielded cable is not used for the sensor connections this will compromise the
(0&DQGPD\LQYDOLGDWHWKHZDUUDQW\
$$HTXLSPHQW$$EDVHVWDWLRQDQG$$UHPRWHFRQVROHPXVWEHLQVWDOOHGDW
OHDVWIWPDZD\IURPDQ\HTXLSPHQWWUDQVPLWWLQJRUFDEOHVFDUU\LQJUDGLRVLJQDOVHJ
9+)UDGLRVPRGL¿HGVLQHZDYHLQYHUWHUVFDEOHVDQGDQWHQQDVRUUDGDUDQWHQQDVDQGDW
OHDVWIWPDZD\IURPDQ\66%HTXLSPHQW$$FDEOHVPXVWEHLQVWDOOHGDWOHDVW
IWPPDZD\IURPVXFKLWHPV
4
PART 2 INSTALLATION
Drilling the Deck: %HIRUHGULOOLQJLQWRWKHGHFNHQVXUHWKHUHLVQRWKLQJEHORZWKHGHFN
WKDWFRXOGEHGDPDJHGDQGWKDWDQ\KROH\RXGULOOZLOOQRWZHDNHQWKHERDW¶VVWUXFWXUH'ULOO
DKROHPP´GLDPHWHUWKURXJKWKHGHFN(QVXUHWKLVKROHLVGLUHFWO\LQOLQHZLWK
the sensor hole in the deckplate.
2.1 INSTALLATION TO OPERATE A WINDLASS
2.1.3 SENSOR INSTALLATION OVERVIEW
Vertical Windlasses: 7KHVHQVRULV¿WWHGLQWKHGHFNSODWH6RPHGHFNSODWHVDUHSUHGULOOHG
IRUWKHVHQVRU2WKHUVKDYHDGLPSOHRUPDUNWRVKRZZKHUHWKHVHQVRUVKRXOGEH¿WWHG
,IWKHZLQGODVVLVQRWIDFWRU\GULOOHGGULOODKROHPP´GLDPHWHUWKURXJKWKH
ZLQGODVVGHFNSODWH6HHWKHLQVWUXFWLRQVIRU\RXUVSHFL¿FZLQGODVVW\SH
+RUL]RQWDO:LQGODVVHV6RPHWLPHVLWLVQRWSRVVLEOHWR¿WWKHVHQVRUWRDKRUL]RQWDO
ZLQGODVVRULWPD\QHHGWREH¿WWHGE\WKHZLQGODVVPDQXIDFWXUHU%HIRUHVWDUWLQJ
FKHFNZLWKWKH$XWR$QFKRUPDQXIDFWXUHURUVXSSOLHUWKDWLWLVSRVVLEOHWR¿WWKH
VHQVRUWR\RXUZLQGODVV<RXPD\QHHGDVSHFLDO¿WWLQJ
2.1.2 MAGNET INSTALLATION OVERVIEW
Check before starting. <RXUFKDLQZKHHOPD\EHSUH¿WWHGZLWKDPDJQHWRUSUHGULOOHG
UHDG\IRU\RXWR¿WWKHPDJQHW
Magnet Polarity: 1RWUHOHYDQWZKHQXVLQJWKHJUH\$$VHQVRURUDUHHGVZLWFK
VHQVRU,IUHWUR¿WWLQJXVLQJWKHEODFN$$VHQVRUWKHVRXWKSROHPDUNHGVLGHRI
the magnet must face the sensor.
Magnet Seal: Insert the magnet into the hole and cover it with a minimum of 1mm of epoxy
WRSURWHFWLWDJDLQVWFRUURVLRQ6HH)LJRQSDJH
Magnet Size and Position: 5HIHUWRWKHLQVWUXFWLRQVIRU\RXUVSHFL¿FZLQGODVVW\SH
2.1.1 MAGNET AND SENSOR INSTALLATION
PLEASE READ BEFORE COMMENCING INSTALLATION
Correct magnet and sensor installation is critical for successful AutoAnchor
operation.
The AutoAnchor can be installed on vertical windlasses, drum winches and most
horizontal windlasses. Installation differs depending on the windlass type and on the
rode (all-chain or rope and chain). Please follow the instructions for your windlass
and rode. If it is not possible to comply with these instructions please check with the
AutoAnchor manufacturer or your supplier for other options or if you are not sure how to
proceed.
6HHwww.autoanchor.co.nz for contact information.
5
3DUW0DOH)LHOG&RQQHFWRU
3DUW)HPDOH)LHOG&RQQHFWRU
,IWKHUHLVQRSOXJRQWKHVHQVRUFDEOHDWWDFKWKH$$¿HOG
connector to the wires and use the connecting cable as above.
2.1.4 PLUG AND PLAY SENSOR CABLE
The AutoAnchor plug and play sensor cable is 2 core, tinned shielded cable. It must be
XVHGWRFRQQHFWWKHVHQVRUWRWKHFRQVROHXQLW(QVXUHWKHFRQQHFWRUVDUH¿UPO\VFUHZHG
together.
The warranty does not apply if the sensor cable plugs are removed.
7KHVHQVRUFDEOHLV¿WWHGZLWKDIHPDOHSOXJWRFRQQHFWGLUHFWWRWKHPDOHFRQQHFWRURQWKH
$$EDVHVWDWLRQ,IDORQJHUOHQJWKLVUHTXLUHGVHQVRUFRQQHFWLQJFDEOHZLWKDPDOH
SOXJDWHDFKHQGLVDYDLODEOHLQWKHIROORZLQJOHQJWKV
P IW 3DUW
PIW 3DUW
P IW 3DUW
P IW 3DUW
P IW 3DUW
P IW 3DUW
$PPDOHIHPDOHFDEOH3DUWSOXVDJHQGHUFKDQJHU3DUWZLOOEHUHTXLUHG
to connect the extension cable to the base station.
Field Connectors
Sensor Connection:7KHVHQVRULVSOXJJHGGLUHFWLQWRWKH$$EDVHVWDWLRQ'RQRW
leave the cable hanging loose, it must be tied in place with cable ties. Extension cable,
JHQGHUFKDQJHUVDQG¿HOGFRQQHFWRUVDUHDYDLODEOHLIUHTXLUHG
6HQVRU3OXJ
Fitting the Sensor: 'RQRWIRUFHWKHVHQVRULQWRWKHKROH+DPPHULQJWKHVHQVRUKHDG
can damage the internal electronics. Ensure the sensor head is positioned so that it will not
be hit by the chainwheel or manual crank mechanism during windlass operation and that it
LVDWOHDVWPPIWDZD\IURPWKHEDWWHU\DQGPRWRUFDEOHV6HFXUHWKHVHQVRUXVLQJD
JRRGTXDOLW\QHXWUDOFXUHVLOLFRQHRUDVWURQJDGKHVLYHHJ6LNDÀH[RU0
Connecting 2 cables together:
,I\RXQHHGWRH[WHQGWKHFDEOHOHQJWKFDEOHVFDQEHMRLQHG
WRJHWKHUXVLQJ3DUW*HQGHU&KDQJHU
Console Plug
6
Dual Installation with Other AA Products
8VHWKH7DGDSWRU3DUWDQGWKHP0DOH)HPDOHH[WHQVLRQFDEOH
3DUW
2.1.5 REED SWITCH SENSORS
6RPHZLQGODVVHVDUHVXSSOLHGSUH¿WWHGZLWKDUHHGVZLWFKVHQVRU5HHGVZLWFKVHQVRUV
PXVWKDYHDPP[PPPDJQHWDQGWKHJDSEHWZHHQWKHUHHGVZLWFKVHQVRU
DQGWKHPDJQHWPXVWEHDPLQLPXPRIPPDQGDPD[LPXPRIPP7KLVVHQVRUUHTXLUHV
D¿HOGFRQQHFWRU
The AutoAnchor will operate with a reed switch sensor for all-chain rode. If using
combination rope and chain rode the reed switch sensor provides a reasonably accurate
count of rode deployed but on retrieval the display may be incorrect because it cannot
allow for the stretch in the rope.
)RUDQDFFXUDWHURSHDQGFKDLQFRXQWWKHUHHGVZLWFKVHQVRUVKRXOGEHUHSODFHGZLWKWKH
$$JUH\VHQVRU
2.1.6 SENSOR TUNING
:KHQWKH$XWR$QFKRULVFRPSOHWHO\LQVWDOOHGWKHVHQVRUPXVWEHWXQHG6HHWKH
LQVWUXFWLRQVRQSDJH
Sensor
SYSTEM
NETWORK
COMMS
SENSOR
BATTERY
& CONTROL
AutoAnchor 703
Base Station
AutoAnchor
560
Console
Up Down
AA703 Base Station
# 9506
# 9505
Sensor Extension Cable
7
Magnet Fit'ULOODKROHPP´GLDPHWHUDQGPP´GHHSWR¿WWKHPDJQHW
in the underside of a spoke in the bottom of the chainwheel. Cover the magnet with a
PLQLPXPRIPPHSR[\7KHPDJQHWVKRXOGEHDOLJQHGZLWKWKHVHQVRU6HH)LJ
2.1.7 INSTALLATION ON A VERTICAL WINDLASS - CHAIN ONLY
Magnet Size:6WDQGDUGVL]HLVPP[PPP7KLVPD\EHUHSODFHGZLWKWKH
VPDOOHUPP[PPPDJQHWLIUHTXLUHGIRU\RXUZLQGODVV
Gap Between the Sensor and Magnet:
6HQVRU 0DJQHW6L]H Gap
$$*UH\6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
$$*UH\6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
$$%ODFN6HQVRU $OO0DJQHWV 0LQLPXPPP0D[LPXPPP
5HHG6ZLWFK6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
Refer to the Overview Notes on page 4 before starting installation.
Sensor Connection:,GHDOO\WKHVHQVRUVKRXOGEHSOXJJHGGLUHFWO\LQWRWKH$$EDVH
VWDWLRQ,IORQJHUFDEOHLVUHTXLUHGXVHWKH$$PPDOHIHPDOHH[WHQVLRQFDEOH3DUW
RURQHRIWKH$$VWDQGDUGPDOHPDOHH[WHQVLRQFDEOHVSOXVWKHPFDEOHDQGD
JHQGHUFKDQJHU(QVXUHWKHFRQQHFWRUVDUH¿UPO\VFUHZHGWRJHWKHU6HHWKHLQIRUPDWLRQ
on page 5.
Loose cable should be tied in place with cable ties and kept clear of chain.
Sensor Position:7KH$$EODFNVHQVRUDQGWKHUHHGVZLWFKVHQVRUPXVWEH¿WWHGGLUHFWO\
LQOLQHZLWKWKHPDJQHWLQWKHFKDLQZKHHO6HH)LJDERYH7KH$$JUH\VHQVRUPD\EH
¿WWHGXSWRPPRXWRIDOLJQPHQW7KHJDSEHWZHHQWKHVHQVRUDQGPDJQHWPXVWEHDV
per the table below.
Note: If it is not possible to
align the sensor and magnet
exactly the AAgrey sensor may
EH¿WWHGXSWRPPRXWRI
alignment. The AA black sensor
and the reed switch sensor must
be directly aligned.
)LJ$OOVHQVRUV
6HDOZLWKPLQLPXPPPHSR[\
0DJQHW
6HQVRU
Chainwheel
'HFNSODWH
8
Magnet Fit: 6RPHZLQGODVVHVDUHSUHGULOOHGDQGRWKHUVQHHGDVSHFLDO¿W3OHDVHFKHFN
ZLWK\RXUVXSSOLHU7KHXVXDO¿WLVDVIROORZV'ULOODKROHPP´GLDPHWHUDQG
PP´GHHSLQWRDVSRNHLQWKHWRSRIWKHFKDLQZKHHO&RYHUWKHPDJQHWZLWKD
minimum of 1mm epoxy. The magnet and sensor must be aligned so that the anchor rode
SDVVHVEHWZHHQWKHP6HH)LJV
6HQVR
r
0DJQHW
)LJ )LJ
2.1.8 INSTALLATION ON A VERTICAL WINDLASS - ROPE & CHAIN
)RUDQDFFXUDWHURSHDQGFKDLQFRXQWWKH rode must run between the sensor and
PDJQHW,I\RXUZLQGODVVLVSUH¿WWHGZLWKDPDJQHWLQWKHERWWRPRIWKHFKDLQZKHHO\RX
QHHGWRUHPRYHLWDQG¿WDQHZPDJQHWLQWKHWRSRIWKHFKDLQZKHHO5HIHUWR)LJV
Magnet Size:PP;PPPDJQHW$QPP[PPPDJQHWPD\EH
used on smaller windlasses. Check with your supplier.
Sensor Position7KHVHQVRUPXVWEH¿WWHGLQWRWKHGHFNSODWHZLWKLQWKHVHQVRUSRVLWLRQ
UDQJHDWWKHVWHUQHQGRIWKHZLQGODVV6HH)LJ,WPXVWDOVREHDOLJQHGZLWKWKHPDJQHW
so that the rode passes between the sensor and the magnet. The centre of the magnet
DQGWKHFHQWUHRIWKHVHQVRUPD\EHXSWRPPRXWRIGLUHFWDOLJQPHQW6HH)LJ7KH
gap between the sensor and magnet must be as per the table below.
Chainwheel
'HFNSODWH
)LJ
6HQVRU0DJQHWPD\EHXSWR
PPRXWRIGLUHFWDOLJQPHQW
PP
6HQVRU
0DJQHW
6HQVRU
0DJQHW
Sensor Position Rope & Chain Vertical Windlasses
Gap Between the Sensor and Magnet
Sensor Magnet Size Gap
$$*UH\6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
$$*UH\6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
Refer to the Overview Notes on page 4 before starting installation.
Sensor Connection: If longer cable is
UHTXLUHGWKH$XWR$QFKRUSOXJDQGSOD\
sensor extension cable must be used
WRFRQQHFWWKHVHQVRUWRWKH$$
base station. Ensure the connectors
DUH¿UPO\VFUHZHGWRJHWKHU6HHWKH
information on page 5.
Loose cable should be tied in place
with cable ties and kept clear of
chain.
6HDOZLWKPLQLPXPPPHSR[\
0DJQHW
90oBow
Stern
Rode
Anchor
Locker
Chainwheel
)LJ
6HQVRU3RVLWLRQ
Range
9
2.1.9 INSTALLATION ON A HORIZONTAL WINDLASS - CHAIN ONLY
)LJ
0DJQHWLQULPRIFKDLQZKHHODQGVWDQGDUG
sensor in sensor holder screwed to the deck
Magnet & Sensor Fitting for Chain Only Horizontal Windlasses
Magnet Size:PP[PPPDJQHW
Magnet Fit: ,I\RXUZLQGODVVLVQRWSUHGULOOHGGULOODKROHPP´GLDPHWHUDQGPP
´GHHSLQWKHHGJHRIWKHFKDLQZKHHO&RYHUWKHPDJQHWZLWKDPLQLPXPRIPP
epoxy.
Gap Between the Sensor and Magnet:
6HQVRU 0DJQHW6L]H Gap
$$*UH\6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
$$*UH\6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
$$%ODFN6HQVRU $OO0DJQHWV 0LQLPXPPP0D[LPXPPP
5HHG6ZLWFK6HQVRU PP[PP 0LQLPXPPP0D[LPXPPP
Sensor Connection:,IORQJHUFDEOHLVUHTXLUHGWKH$XWR$QFKRUSOXJDQGSOD\VHQVRU
H[WHQVLRQFDEOHPXVWEHXVHGWRFRQQHFWWKHVHQVRUWRWKH$$EDVHVWDWLRQ(QVXUH
WKHFRQQHFWRUVDUH¿UPO\VFUHZHGWRJHWKHU6HHWKHLQIRUPDWLRQRQSDJH
Loose cable should be tied in place with cable ties and kept clear of chain.
Refer to the Overview Notes on page 4 before starting installation. It is not
possible to set out a single installation method for horizontal windlasses.
7KHVHQVRUPD\EH¿WWHGLQVLGHWKHZLQGODVVRU\RXPD\QHHGDVHQVRU
holder (Part #9110). See Fig 6 below. Often the sensor and magnet can only
EH¿WWHGE\WKHZLQGODVVPDQXIDFWXUHU
6HQVRU+ROGHU
6HQVRU
0DJQHW
Sensor Position:7KH$XWR$QFKRUVHQVRUPD\EH¿WWHGXVLQJDVHQVRUKROGHU¿[HGWRWKH
GHFNWRVLWXQGHUWKHFKDLQZKHHO6HH)LJ7KH$XWR$QFKRUVHQVRUKROGHULVQRW
included in the standard kit. Check with your supplier if you need this. TheAA black sensor
DQGWKHUHHGVZLWFKVHQVRUPXVWEH¿WWHGGLUHFWO\LQOLQHZLWKWKHPDJQHWLQWKHFKDLQZKHHO
7KH$$JUH\VHQVRUPD\EH¿WWHGXSWRPPRXWRIDOLJQPHQW7KHJDSEHWZHHQWKH
sensor and magnet must be as per the table below.
Inhaltsverzeichnis
Andere Maxwell Messgerät Handbücher
