McFarlane FINALIZER 6000 Series Leitfaden
OPERATION AND
PARTS MANUAL
Read and understand the manual. This manual provides
information and procedures to safely operate and maintain
the Finalizer 6000.
Learn more at www.mcfarlaneag.com
FINALIZER™ 6000 SERIES
Secondary Tillage
PART NUMBER: 15487 — Serial Number 23543 - higher
1Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Table of Contents
Introduction 3
Contact Information 3
Safety 3
General 3
Safety Alert Symbols 4
Safety Icons Nomenclature 5
General Operating Safety 6
Towing Safety 6
Operation Safety 6
Assembly Safety 6
Maintenance Safety 6
Component Nomenclature 7
Component Locations 7
Specications 8
Hydraulic Requirements 8
Horsepower Range 8
Sweep Depths 8
Tongue Weight 8
Overall Weight (GVWR) 8
Transport Width 8
Transport Height 8
Working Tillage Width (Cut Width) 8
Field Capacity (acre/hr @ 6-9 mph) 8
Towing Speed 8
Display of Hazard and Info Signs 9
Towing 11
General Safety 11
Safety Chain 12
Bystanders 12
Towing and Maximum Towing Speed 12
Highway and Transport Operations 12
Pre-towing Checklist 13
Safety 14
Prior to Connecting Unit 14
Tow Chain 14
Connecting to the Tractor 15
Operation 18
Safety 18
Initial Setup 18
Machine Leveling 19
Leveling Wing Frames 20
Sweep Depth Adjustment 20
Disk Depth Adjustment 20
Conditioning Option Adjustment 21
Harrow and Rolling Basket Adjustment 22
Preparing for Transport 24
Maintenance 25
Safety 25
Tire and Lug Torque Specications 26
Bolt Torque Chart 26
Maintenance Schedule 27
Maintenance Procedures 29
Axle Assembly Wear Sleeves 30
Lubrication Locations Drawing 31
Hydraulic Component Safety 32
Tire Safety 32
Storage 33
Safety 33
Power wash the unit prior to storage 33
Placing Into Storage (Disk Coatings) 33
Warranty 33
Limited Warranty Statement 33
Serial Number Location 33
Troubleshooting 34
Parts Section 35
Ordering Parts 35
Dealer Contact Information 35
Decals 35
Parts Drawings 36
2Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Introduction
The 6000 Series Finalizer from McFarlane Mfg. features
wavy, serrated Cobra disk blades, loosens the top one to
ve inches of the soil yet leaves the seedbed rm. This
ensures accurate seed depth at planting, resulting in even
emergence and better yields. Smoothing uneven ground
and removing small weeds are done quickly at the 6-8mph
operating speeds.
The Finalizer is available in a 24’, 29’ and 32’ folding
frames. The horsepower required to pull the Finalizer is
approximately 8-9 hp per foot of width.
Contact Information
If you have questions not answered in this manual, require
additional copies, or the manual is damaged, please
contact your local dealer or:
McFarlane Mfg. Co., Inc.
1330 Dallas Street
P.O. Box 100
Sauk City, WI 53583
Phone: (608) 643-3322
Toll Free: (888) 627-8569
Fax: (608) 643-3976
E-mail: [email protected]
Web: www.mcfarlaneag.com
Safety
General
Safety of the operator and bystanders is one of the main
concerns in designing and developing a new piece of
equipment. Designers and manufacturers build in as
many safety features as possible. However, every year
many accidents occur which could have been avoided by
a few seconds of thought and a more careful approach to
handling the equipment.
Most work related accidents are caused by failure to
observe basic safety rules or precautions. An accident
can often be avoided by recognizing potentially hazardous
situations before an accident occurs. As you assemble,
operate, tow, or maintain the Finalizer (unit), you must
be alert to potential hazards. You should also have
the necessary training, skills, and tools to perform any
assembly or maintenance procedures.
Improper operation and maintenance of this unit could
result in a dangerous situation that could cause injury or
death.
WARNING
Do not use or tow the unit until you read and
understand the information contained in this
manual.
Safety precautions and warnings are provided in
this manual and on the unit. If these hazard
warnings are not heeded, bodily injury or death
could occur to you or to other persons.
McFarlane cannot anticipate every possible circumstance
that might involve a potential hazard. The warnings in this
manual and on the product are, therefore, not all-inclusive.
If a method of operation not specically recommended by
us is used, you must satisfy yourself that it is safe for you
and for others. You should also ensure that the unit will not
be damaged or be made unsafe by the methods that you
choose.
The information, specications, and illustrations in this
manual are based on the information that was available at
the time this material was written and can change at any
time.
3Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Safety Alert Symbols
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
This manual contains DANGERS, SAFETY
INSTRUCTIONS, CAUTIONS, IMPORTANT NOTICES,
and NOTES which must be followed to prevent the
possibility of improper service, damage to the equipment,
personal injury, or death. The following key words call the
readers attention to potential hazards.
Hazards are identied by the “Safety Alert Symbol” and
followed by a signal word such as “DANGER”, “WARNING”,
or “CAUTION”.
DANGER
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury. This
signal word is limited to the most extreme situations.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE
Indicates that equipment or property damage can result if
instructions are not followed.
SAFETY
INSTRUCTIONS
Safety instructions (or equivalent) signs indicate
specicsafety-relatedinstructionsorprocedures.
NOTE: Contains additional information important to a
procedure.
4Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Safety Icons Nomenclature
This manual and the equipment
has numerous safety icons. These
safety icons provide important
operating instructions which alert
you to potential personal injury
hazards.
Personal Protection/Important
Information
Read the manual
Maintenance procedure
Crush hazard
Eye protection
Hand protection
Head protection
Hearing protection
Inspect equipment
OEM
OEM
OEM parts only
Place in neutral
Protective shoes
Remove key
N
I
NG
AR
Damaged hazard label
Set parking brake
Slow vehicle placard
STOP
Stop engine
Support stand usage
Use proper tools
Visually inspect
Prohibited Actions
Do not alter or modify
Do not leave out tools
Do not weld
No alcohol
No children
No drugs
No open flame
No passengers
No riders
No smoking
Hazard Avoidance
Block wheels
Crushing hazard (body)
Crush hazard (foot)
Crush hazard (rolling over)
Defective or broken part
Entanglement hazard
Explosive separation hazard
Falling hazard
Fire hazard
High-pressure fluid hazard
Hose damage
Hot surface
Maintain safe distance
Overturn hazard
Pinch point hazard
Pressure alert / check
pressure
Projectile hazard
Safety alert symbol
Sharp object hazard
Slipping injury
Tripping injury
0
Zero pressure
5Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
General Operating Safety
WARNING
Read And Understand Manual
To prevent personal injury or even death, be sure
you read and understand all of the instructions in
this manual and other related OEM equipment
manuals! This equipment is dangerous to children and
persons unfamiliar with its operation. The operator
should be a responsible adult familiar with farm
machinery and trained in this equipment’s operations.
Do not allow persons to operate or assemble this unit
until they have read this manual and have developed a
thorough understanding of the safety precautions and
how it works.
Thisunitwasdesignedforaspecicapplication;DO
NOT modify or use this unit for any application other
than which it was designed.
Units operated improperly or by untrained personnel
can be dangerous!
N
I
NG
AR Hazard And Information Signs
Replaceanymissingorhard-to-readdecals.
Decal placement and part numbers can be found
in the Nomenclature section of this manual.
Damaged Parts Hazard
Do not use this unit if it is in need of repair. If
you believe the unit has a defect which could
cause damage, injury, or death, you should
immediately stop using the unit.
Fall Hazard
Do not use the unit as a work platform. Do
not stand on top of the unit at any time. Do
not ride on the unit or allow others to ride on it.
Entanglement Hazard
Donotwearloosettingclothingwhichmay
become entangled in moving parts.
STOP
Crush Hazard (Rolling Over)
When disconnecting the unit or leaving the
operator’s seat:
1. Stop the tractor or towing vehicle.
2. Shutotheengineandremovetheignitionkey.
3. Set the brakes.
4. Make sure wheel cylinder transport locks are
attached.
5. Relievehydraulicuidpressure.
6. If parking the unit, make sure jack stand is
lowered and retaining pin is installed.
Injury Hazard
Do not permit children to play on or around the
stored unit.
WARNING
Impaired Operator Hazard
Do not attempt to operate this unit under
theinuenceofdrugsoralcohol.Review
the safety instructions with all users annually.
Personal Protection Equipment
When working around or operating this unit, wear
appropriate personal protective equipment. This list
includes but is not limited to:
• A hard hat
• Protective shoes with slip resistant soles
• Protective goggles, glasses, or face shield
• Heavy gloves and protective clothing
Safe Distance
Keep all bystanders, especially children, away
from the unit while in operation.
SAFETY
INSTRUCTIONS
To prevent injury, use a tractor equipped with a
Roll Over Protective System (ROPS).
Visually Inspect
Visually inspect the unit for any loose bolts,
worn parts, or cracked welds, and make
necessary repairs before using the unit.
Towing Safety
For towing safety information, refer to the Towing section.
Operation Safety
For operating safety information, refer to the Operation
section.
Assembly Safety
For assembly safety information, refer to the separate
Assembly manual.
Maintenance Safety
For maintenance safety information, refer to the
Maintenance section.
6Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Component Nomenclature
Component Locations
1
2
3
4
The Finalizer is comprised of four components: (1)
Cobra disk gangs, (2) shanks with Talon™sweep, (3)
Conditioning option (Conditioning Reel or Spur-Till) and
(4) Finishing conguration (3-bar harrow with single rolling
basket or 5-bar harrow).
7Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Specications(sameforallconditioningoptionsandnishingcongurations)
Hydraulic Requirements
This unit operates with hydraulic pressures of 2500 to 3000
psi (170 to 205 bars).
Horsepower Range
FN-6024-ST3RB — 240 to 330
FN-6029-ST3RB — 280 to 400
FN-6032-ST3RB — 320 to 445
Tillage Depths
Sweep depth up to 5” (12.7 cm)
Tongue Weight
Tongue weight of the unit is approximately 700 lbs. (318 kgs)
Overall Weight (GVWR)
FN-6024-ST3RB — 17,140
FN-6029-ST3RB — 19,757
FN-6032-ST3RB — 20,864
Transport Width
FN-6024-ST3RB — 15’4”
FN-6029-ST3RB — 15’4”
FN-6032-ST3RB — 15’4”
Transport Height
FN-6024-ST3RB — 9’11”
FN-6029-ST3RB — 12’3”
FN-6032-ST3RB — 13’6”
Working Tillage Width (Cut Width)
FN-6024-ST3RB — 24’3”
FN-6029-ST3RB — 28’9”
FN-6032-ST3RB — 31’9”
FieldCapacity(acre/hr@6-8mph)
FN-6024-ST3RB — 15-20
FN-6029-ST3RB — 18-24
FN-6032-ST3RB — 20-26
Towing Speed
Towing speeds should not exceed 20 mph (32 kph)
Field operating speeds should be 6-8 mph (9-13 kph).
8Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Instructions for Display of Hazard and
Informational Signs
• It is the responsibility of the customer to know the
lighting and marking requirements of the local highway
authorities and to install and maintain the equipment
to provide compliance with the regulations. Add extra
lights when transporting at night or during periods of
limited visibility.
• Keep safety signs clean and legible at all times.
Replace safety signs that are missing or have become
illegible.
• Do not paint over, remove, or deface any safety signs
or warning decals on your equipment. Observe all
safety signs and practice the instructions on them.
• Replacement parts that display a safety sign should
display the same sign.
• Make sure the hazard warning labels or other
information decals are legible and attached to the unit
before use.
• Safety signs are available from your Distributor, Dealer
Parts Department, or the factory.
NOTICE
Tractor must be in
constant flow mode.
Do not exceed 250 PSI
during field operation.
14671
1 Turn = 1/2”
Deeper
9Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
1 Turn = 1/2”
Deeper
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
14039
14051
DC-306
DC-231
NOTICE
Tractor must be in
constant flow mode.
Do not exceed 250 PSI
during field operation.
14671
Assembly
Refer to the separate Finalizer Assembly manual for
complete assembly instructions.
15461
14050
10Finalizer 6000 Series Mcfarlaneag.com 888-627-8569
Inhaltsverzeichnis
Andere McFarlane Landwirtschaftliche Geräte Handbücher
McFarlane
McFarlane HDL-100-8 Series Handbuch
McFarlane
McFarlane HDL-1000 Series Montage- und Wartungsanleitung
McFarlane
McFarlane Reel Disk 4100 Series Leitfaden
McFarlane
McFarlane QUADRA-TILL 200 Series Leitfaden
McFarlane
McFarlane Universal Tillage COBRA 4200 Series Leitfaden
McFarlane
McFarlane INCITE 5100 Series Bedienungsanleitung
McFarlane
McFarlane HDL-1100 Series Montage- und Wartungsanleitung
McFarlane
McFarlane RD-4000 Series Fehlerbehebungshandbuch
