Meade RCW33W Bedienungsanleitung

Meade Instruments Corp

Personal Weather Station

With Atomic Clock

(RCW33W)

USER MANUAL

TABLE OF CONTENTS

INTRODUCTION 3

PRODUCT OVERVIEW 4

BEFORE YOUBEGIN 7

BATTERY INSTALLATION 8

LOW BATTERY WARNING 9

GETTING STARTED 9

PLACEMENT OFTHE UNITS 10

REMOTEAND INDOORTEMPERATURE 10

WEATHER FORECAST 10

LOST COMMUNICATION 11

TRANSMISSION COLLISION 12

WWVB RADIO CONTROLLED TIME 12

ATOMICCLOCK 13

TIMEAND CALENDAR DISPLAY MODES 14

MANUALSETTINGS 14

PRECAUTIONS 15

TROUBLESHOOTING 16

SPECIFICATIONS 17

FCC STATEMENT 18

DECLARATION OF CONFORMITY 19

STANDARDWARRANTYINFORMATION 20

INTRODUCTION

Thank you for selecting the Meade Atomic Wall Clock. This device combines

precise time keeping with monitoringand displaying theweather conditions

from one remote location.

In thispackage you will find:

•One main unit (receiver)

•One remote sensor (transmitter) TS13C

•One User Manual

Please keep this manual handy as youuse your new item. It contains practical

step-by-step instructions,as well as technical specifications and precautions

you should know.

PRODUCT OVERVIEW

MAIN UNIT

FEATURES

•Time automatically sets to the USAtomic Clock

•12 or 24 hoursTime Format

•Jumbo time digits

•Day of the week displayed in English, Spanish, French, German and

Italian

•Weather Forecast in Sunny, Partly Cloudy, Cloudy, Rainy and Heavy

Rain icons

•Wireless Reception of the Temperature from the Remote Sensor to the

Main Unit fromup to 100 feet (30 meters) away

•Indoor and Remote Temperature display

•Low Battery Indicators

FRONT/REAR VIEW

A. WEATHER AND TIME IN EASY-TO READ DIGITS

B. MODE button

•Toggles between time modes -time with seconds and time with the

day of the week

•Activates clock’s manual programming mode

C. UP ( ▲) button

•Increases the parameters

•Activates US Time Zone selection mode

•Activates manual search for atomic time signal

D. DOWN ( ▼) button

•Decreases the parameters

•Activates manual remotechannel search

E. BATTERY COMPARTMENT

•Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries

F. UNFOLDING TABLE STAND

•Holds unit in upright position on a flat surface

G. WALL- MOUNT RECESSED OPENING

•Keeps the unit on the wall

REMOTE SENSOR

FEATURES

•Remote temperature transmission to the main unitvia433 MHz

frequency

•Case can be wall mounted using built-in hanger

•Selection of the temperature display in Celsius or Fahrenheit

•Three channel selection

•LCD displays temperature, and channel

A. LED INDICATOR

•Flashesonce when the remote sensor transmits a reading to the main

unit.

•Flashes twice when battery power is low.

B. BATTERY COMPARTMENT

•Holds two AA-size batteries

C. RESET

•Resets all previous settings

D. CHANNEL SWITCH

•Selects the desired channel -1, 2 or 3

E. WALL-MOUNT RECESSED OPENING

•Keeps the remote sensoron the wall

F. °C/ °F SWITCH

•Selects the temperature display in Celsius or Fahrenheit

BEFORE YOU BEGIN

•We recommend using alkaline batteries forthe remotesensor and

main unit when temperatures are above 32°F (0°C). We recommend

using lithiumbatteries for the remotesensor when temperaturesare

below 32°F (0°C).

•Avoid using rechargeable batteries. (Rechargeable batteries cannot

maintain correct power requirements).

•ALWAYS install batteries in the remote sensor before the main unit.

•Insert batteries before first use, matching the polarity in the battery

compartment

•Press RESET after each battery change with a paper clip or similar

tool.

•Remove protective plastic screen fromLCD display (if any).

•During an initial setup, place the main unit close to the remote sensor.

•After reception is established (the remote temperature will appear on

the mainunit’sdisplay), position the remote sensorand the mainunit

within the effective transmission rangeof 100 feet (30 meters).

•The remote sensor can be placed indoors or outdoors, depending

on the area where the temperature is intended to be measured. If

you intend measuring outdoor elements, place remote sensor outdoors

•The main unit must be placed indoors.

NOTE:

1.Avoid pressing any buttons on the main unit before the remote readings

are displayed.

2. The effective operating range may beinfluenced by the surrounding building

materials and how the receiver and transmitter are positioned.

3. Place the remote sensorso that it faces the main unit(receiver), minimizing

obstructions such as doors, walls, and furniture.

4. Though the remote sensors are weather-resistant, they should be placed

away from direct sunlight, rain or snow. The best suggested location for the

remote sensorfor outdoors isunder the eave on the north sideof thebuilding.

NOTE: When the temperature falls below freezing, the batteries in the

outdoor remote sensor may have reduced voltage supply and a shorter

effective range. We recommend using lithium batteries at temperatures of

32°F (0°C) and below.

BATTERY INSTALLATION

REMOTE SENSOR

NOTE: Install the batteries; select the channel and temperature in °C or °F

before mounting the remote sensor.

•Remove the screws from the battery compartment with a smallPhillips

screwdriver.

•Set the channel. The switch is located in the battery

compartment. Channel 1 istypically selected if onlyone remote sensor

is being used.

•Install 2 “AA” size alkaline batteries (not included) matching the

polarities shown in the battery compartment.

•Replace the battery compartment door and secure the screws.

•Securethe remote sensorin the desired location.

MAIN UNIT

•Remove the battery compartment door.

•Install 2 batteries (UM-3 or “AA” size 1.5V) matching the polarity as

shown in the battery compartment.

•Replace the battery compartment door.

LOW BATTERY WARNING

A low-battery indicator [ ] will appear next to the indoor or remote data

reading line of the main unit warning that the corresponding batteries need

replacement.

GETTING STARTED

WEATHER DISPLAY

After batteries are installed;remote sensor will transmit temperature data at45

second intervals. The main unit may take upto two minutes to receive the initial

readings. Upon successful reception, remote temperature will appear next to

the OUT abbreviation on the main unit’s display (The main unit will

automatically update readings at 45-second intervals)

After communication between the main unit and remote sensor has been

established, secure the remote sensor in the desired location.

If no signal is received from the remote sensor within two minutes, dashes[- - -]

will be displayed. Press and hold the DOWN (



)button on the main unit for

two seconds to initiate another signal search.

PLACEMENT OF THE UNITS

The main unit can be placed on the wall or any flat surface indoors. The

remote sensorcanbeplacedindoors oroutdoors,ona flatsurfaceormounted

on the wall.

REMOTE AND INDOOR TEMPERATURE

The remote temperature information line is located nextto the indoor

temperature line of the main unit’s display.

The waveicon is located above the OUT abbreviation indicates the reception

status from the remote sensor.

There are three following types of the reception statusmay be displayed:

The unit is in a searching

mode.

Temperature reading is

securely registered.

No signals detected. - - -

NOTE: If the indoor or remote temperature goes above or below operating

range stated in specifications, the main unit’s display (weather) will show

dashes “- - -” on the corresponding line.

WEATHER FORECAST

This unit is capable of detecting the atmospheric pressure changes.Basedon

collected weather data, it forecaststhe weather for the next 12 to 24 hours.

Inhaltsverzeichnis

Andere Meade Wetterstation Handbücher

Meade

Meade TE923W-M Bedienungsanleitung

Meade

Meade TE653ELW-M Bedienungsanleitung

Meade

Meade TE827W Bedienungsanleitung

Meade

Meade TE388W Bedienungsanleitung

Meade

Meade TE688W Bedienungsanleitung

Meade

Meade TE923W Bedienungsanleitung

Meade

Meade TE346W Bedienungsanleitung

Meade

Meade TE636W Bedienungsanleitung

Meade

Meade TE242ELW Installationsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung