Mec Purair 130 Montageanleitung

MEC Medical Limited

Unit 3, Trust Industrial Estate

Wilbury Way

Hitchin

Hertfordshire. SG4 0UZ

sales@mecmedical.com

www.mecmedical.com

P130UM/R001

ISSUE 10/Sep2017

Read this manual before operating the machine.

The user must be familiar with the machine and its

various functions before using it on a patient.

Recommended operating environment Temperature: 15°C-25°C

Humidity: Max relative humidity 90% (up to 31°C) decreasing

linearly to 50% relative humidity at 40°C Altitude: Max 2,000m.

Storage/transport temperature -20°C to 45°C (-4°F to 113°F).

Store all components in a cool, dry place when not in use.

Purair 130 AGSS Table of Contents

Table of Contents

Section 1 - Introduction .......................................................................

Foreword ........................................................................................ 5

Notices ...................................................................................... 6

Hazard Notices ......................................................................... 7

User Responsibility................................................................... 8

Servicing Policy ........................................................................ 9

Warnings and Cautions.......................................................... 10

Symbols and Abbreviations ................................................... 11

Section 2 - Description ....................................................................... 13

Pre Use checkout procedure...................................................... 13

Section 3 - Installing and Operating the Purair 130 AGSS ...........15

Installing the Purair 130 AGSS ................................................... 15

Section 4 - Servicing Procedure ....................................................... 17

Disassembly................................................................................. 17

Cleaning ....................................................................................... 19

Re-assembly of the Receiver Unit .............................................. 19

Servicing the Air Mover Assembly ..............................................20

Section 5 - Troubleshooting .............................................................. 21

Section 6 - Appendix ........................................................................... 22

Spares List ................................................................................... 22

Pressure Relief Valve Specification............................................ 23

Operator and Maintenance Manual 3

List of Figures Purair 130 AGSS

List of Figures

Figure 1 Purair 130 AGSS .............................................................. 12

Figure 2 Float Positions .................................................................. 13

Figure 3 Installing the Purair 130 AGSS........................................14

Figure 3A Installation ........................................................................ 15

Figure 4 Disassembly ..................................................................... 18

Figure 5 Motor Housing ..................................................................20

4Operator and Maintenance Manual

Purair 130 AGSS 1. Introduction

1. Introduction

Foreword

This manual is intended for users of the Purair 130 AGSS (Anaesthetic

Gas Scavenging System) and contains detailed information and

operating instructions. It also includes cleaning and sterilisation

methods, basic trouble-shooting and maintenance procedures.

Personnel operating the Purair 130 AGSS must become thoroughly

familiar with the instructions contained in this handbook prior to using the

device with patients.

The Purair 130 AGSS is intended for use by a qualified practitioner under the

direction of a qualified anaesthetist. When the unit is connected to a patient, it

is recommended that a licensed medical practitioner be in attendance at all

times.

The Purair 130 AGSS is classified as a Class 1 electrical item which includes

an electrical earth.

Operator and Maintenance Manual 5

1. Introduction Purair 130 AGSS

Notices

Product Improvement

MEC has a policy of continued product improvement and therefore

reserves the right to make changes which may affect the

information contained in this manual without giving prior notice.

Responsibilities of the Manufacturer

The Manufacturer accepts responsibility for the effects on safety,

reliability and performance of the equipment only if:

assembly operations, extensions, adjustments, modifications

and repairs are carried out by persons with written

authorisation from the manufacturer and, 



the equipment is used in accordance with the instructions

contained in this manual. 

Disclaimer

Assembly operations, extensions, adjustments, modifications and repairs

to the Purair 130 AGSS unit made by unauthorised personnel

automatically void all warranties and specifications. The prevention of

tampering is solely the responsibility of the user.

Conventions

The terms left, right, clockwise and anti-clockwise refer to the Purair

130 AGSS when viewed from the front.

publication may not be used for any purpose other than that for which it

was originally supplied. This publication may not be reproduced in part or

in whole without the written consent of MEC.

Valve System

Patent No: 2228419A

CE Marking

The product is labelled with the CE mark.

6Operator and Maintenance Manual

Purair 130 AGSS 1. Introduction

Note to Service Personnel

The contents of this manual are not binding. If any significant difference is

found between the product and this manual, please contact MEC for

further information at the address on the front cover.

It is recommended that the equipment is serviced at regular intervals

(eg. every 6 months) by qualified service personnel using genuine

spare parts for all servicing and repairs.

The power cable is only to be replaced by qualified persons with parts

supplied by MEC Medical Ltd.

Contact MEC sales and they will advise of a suitable engineer.

Hazard Notices

This manual contains important information. Statements preceded with

the following symbols are of special significance.

Warning Notices Denote a potential hazard to the health and

safety of users and/or patients. These notices clearly state

the nature of the respective hazard and the means by which

it can be avoided.

Warning notices appear in full in the preliminary pages and

are highlighted at their point of application in the manual.

Cautionary Notices denote a potential hazard to the

physical integrity of equipment but NOT a danger to

personnel. These notices clearly state the nature of the

hazard and the means by which it can be avoided.

Cautionary notices appear in full in the preliminary pages and

are highlighted at their point of application in the manual.

Operator and Maintenance Manual 7

1. Introduction Purair 130 AGSS

Relevant or helpful information.

Additional copies of this O & M manual can be obtained from MEC

(Quote Part number P130UM/R001 - Purair 130 AGSS Manual).

It is recommended that all relevant documentation, including the

Operator and Maintenance Manual, accompanying labels and/or inserts,

is immediately available to all prospective users of the equipment.

User Responsibility

The performance of this product conforms with the description thereof

contained in this manual and accompanying labels and/or inserts when

the product is set up, operated, maintained and serviced in accordance

with the instructions provided.

The product must be checked periodically.

A defective product must not be used.

Parts that are broken, missing, plainly worn, distorted or contaminated

must be replaced immediately. Should such repair or replacement

become necessary, the manufacturer recommends that a verbal or

written request for service advice is communicated either to MEC or to an

authorised distributor.

It is recommended that this product, including any of its parts, is

repaired only by trained personnel in accordance with written

instructions provided by MEC.

The product must not be altered without the prior written approval of MEC.

The user of this product shall have sole responsibility for any

malfunction which results either from alteration by anyone other than

authorised, fully trained personnel or from improper use, faulty

maintenance, improper repair or damage.

Specification

Equipment specification

Class 1.

The system is for use in an environment

<25oc and 90% RH.

Voltage

230V 50Hz.

Operating Current

0.4amps.

Power

100VA.

8Operator and Maintenance Manual

Purair 130 AGSS 1. Introduction

Servicing Policy

Warning: Only Engineers trained to repair and/or service this

type of equipment should attempt to repair and/or service the Purair 130

AGSS. It must only be repaired and/or serviced in accordance with

written instructions provided by MEC. An improper repair and/or service

could result in patient injury.

Requests for servicing facilities, advice or assistance must be

addressed either to MEC or an authorised distributor.

Contact MEC sales or an authorised distributor and they will advise of a

suitable installer.

Warranty repairs must only be performed by MEC or authorised distributors.

Do not use malfunctioning equipment. Parts listed in this manual can

be replaced only by Engineers trained to repair and/or service this type

of equipment.

After repair, the equipment must be tested to verify that it operates

correctly. If assistance is required, contact MEC or the nearest

authorised distributor.

In the event that the Purair 130 AGSS is to be transported to MEC or an

authorised distributor, it should be securely packed with suitable protection

for transit, in the original packaging if possible, and shipped pre-paid.

Enclose the following items as applicable:

A letter describing in detail any difficulties experienced with the

equipment. 



Warranty information, such as a copy of the invoice or other

applicable documentation. 



Purchase Order number to cover repair of equipment not under

warranty. 



Serial number (located on the label at the base of the receiver

unit: part number (2) ). 



Contact name and telephone number. 

Operator and Maintenance Manual 9

Inhaltsverzeichnis

Andere Mec Medizinische Geräte Handbücher

Mec

Mec Purair 750 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung