Medic Therapeutics ELITE Bedienungsanleitung

ELITE FOLDING TREADMILL

User Manual

Please read this user manual carefully prior to using the treadmill.

CONTENT

1 Safety Instructions ................................................................. 1

2 Quality Assurance Commitment ...

........................................

3 Package Components and Technical Specifications ...

.......

.. 2

4 Product Introduction .........................................

.................

... 4

5 Assembly instructions ....

.....................................................

.. 5

6 How to Use Treadmill ...........

..............................................

... 6

7 How to Use Display Panel ............

..............................

.......... 6

8 Maintenance Guide ...........

.................................................

... 7

9 Troubleshooting Codes .........

.............................................

... 9

10 Warm-up Exercise ..…………….…………………………..…................ 9

1. SAFETY INSTRUCTIONS

• To ensure your safety and avoid accidents, please read the instructions carefully before use.

• This product is for indoor use only; please do not make it or use it outdoors. The treadmill should be placed in a

flat and clean space, do not put it on top of a thick carpet or near water. There should be a 3-6 ft open safety area

behind the treadmill.

• This product is not designed for people or children with limited physical or mental capacities, or people with zero

experience and knowledge, unless they are supervised and instructed by an adult responsible for their safety.

• If the power cord is damaged, in order to avoid any danger, it must be replaced by the manufacturer or professional

maintenance personnel.

• Power plug can only be connected to a 100V-120V AC voltage power socket. Please use the power socket with a safe

ground line. The installation and grounding of the plug must be consistent with the parameters of the user’s area.

• Check all parts before use to ensure that they are securely placed and locked in.

• When using the product, please wear comfortable and tight clothing to help avoid any accidents such as tripping or

clothes getting tangled while in use. Don’t let children or pets come near to avoid accidents.

• Avoid touching all moving parts of this product with your hands. Do not place hands or feet in the space under the

running belt.

• This equipment is designed for home use only. It is not suitable for professional training and testing. It cannot be

used for medical purposes.

• The heart rate display of this product does not provide data for medical purposes.

• This product should be used by only one person at a time.

• Before cleaning and maintenance, please shut down the treadmill and unplug the power plug.

• Shut down the machine and unplug the power plug when the product is not in use.

• It is strictly forbidden to replace any spare parts privately.

• Maximum user weight limit is 240 lbs. (108kg). If the user weighs more than 240 lbs. (108kg), it is not recommended

that you use this product. Severe injury could occur if the user exceeds the weight limits stated here. This product

has not been designed for users who exceed this weight limit.

2. QUALITY ASSURANCE COMMITMENT

• This product is made of high quality materials.

• In normal use, if there is a problem, please read warranty section of this user manual for details.

• The warranty will not cover the following reported issues:

o Damage caused by external factors.

o Use non-original accessories.

o Privately hired maintenance.

o User manual safety and instructions were not followed.

3. PACKAGE COMPONENTS AND TECHNICAL SPECIFICATIONS

PACKAGE COMPONENTS

Parts Name Sketch (for reference) QTY

Medic Therapeutics Special Edition Elite Folding Treadmill 1

User Manual 1

Inner Hexagon Spanner 1

Silicone oil 1

TECHNICAL SPECIFICATIONS

Packing Dimension: 61.8 x 29.9 x 6.5 Inches

Folded Dimensions: 58.7 x 26.4 x4.9 Inches

Unfolded Dimensions: 54.33 x 26.4 x 43.9 Inches

Running Area: 17 x 42.5 Inches

Maximum Power: 550 W

Speed Range: 0.6 – 7.6 MPH

Maximum Weight Limit: 240 Lbs.

Net/Gross Weight: 57.32 / 68.35 Lbs.

4. PRODUCT INTRODUCTION

Display panel

Bracket

Speed Adjustment Button

Safety lock switch

Motor cover

Running belt

Pedal strip

Rear protection cover

Power switch

Rear protection cover

Locking switch

Motor lower cover

Column handrail

Speaker

5. ASSEMBLY INSTRUCTION

STEPS FOR COLUMN HANDRAIL ASSEMBLY

1. Open the packing box, remove the relevant accessories and machine from the box, and place the machine on a flat

surface floor to properly begin product assembly.

2. Lift up the handle until it reaches its maximum point and cannot move any further.

3. Hold the column handrail tube with one hand and turn the locking switch back and forth in the other hand until it

clicks and securely locks into position. Both the left and right sides operate in the same manner.

4. Push the bracket in to the OPEN direction, push it slightly outward and then release it to allow it to LOCK to its

maximum limit.

STEPS TO FOLD DOWN

1. Push the bracket to the OPEN direction, rotate it inward, and then release it to LOCK position to keep it in place.

2. Hold the column handrail tube with one hand, and turn the lock switch forward to loosen the locking switch with

the other hand. Both the left and right sides operate the same.

3. Once both sides are loose push column handrails down to fold them. Product will lay flat

Open Lock

Open

Loose

Lock

6. HOW TO USE TREADMILL

Plug in the power cord and turn on the power switch. The switch will light up and the machine will make a “beep”

sound, notifying the user that the product has been turned on. Lighting on the display panel will turn on as well.

SAFETY LOCK

The treadmill will only work if the safety lock key is completely placed in the slot on the dashboard.

Take the clip end section of the safety lock key and attach it to you clothing. In the unlikely event of an accident, pull

off the safety lock key to immediately stop the motor. If you want to continue using the treadmill, put the safety lock

key back in

7. HOW TO USE DISPLAY PANEL

OPERATION FUNCTION

Turn on the power, all windows will light up for 2 seconds then the machine will automatically go on standby mode.

Once the safety lock key is set in place, press the “ ” button. A three second countdown will begin. Once the time

is up the treadmill’s running belt will start moving at the lowest speed. To increase the speed, rotate the “ ” knob

clockwise. To decrease the speed, rotate counterclockwise.

To stop the treadmill press the “ ” button or disconnect the safety lock key and the treadmill will slowly come to a full stop.

Bluetooth

Speed, calorie

display window

Start/stop speed increase

and decrease knob

Time, distance

display window

Safety lock

Power switch

1.6 0739 18 180

SPEED

mph

TIME

min

DISTANCE

mi.

CALORIES

kcal

When the your device is connected to the treadmill’s Bluetooth, press the volume down button during playback to

decrease the volume; press the volume up button to increase the volume; press the music pause button to pause music

playback, and press it again to resume music playback.

Dormancy Mode

When there is no operation detected for more than 5 minutes once the treadmill has been stopped, the system will shut

down all the displays and enter dormancy mode. Press “ ” button to reactivate the treadmill again.

Emergency Stop Switch Function

At any time that the safety lock key is removed, the treadmill will quickly decrease speed to a complete stop and all

data will be cleared to 0. The corresponding windows will display “ -------“

All normal operations must be carried out with the safety lock key properly locked in.

Mobile phone Bluetooth music connection operation

How to connect to the treadmill’s Bluetooth:

1. Open up Bluetooth paring settings on your device.

2. Find a network named “MT TRADEMILL”; select and pair to your device.

3. Music can be controlled from your device and will play through the treadmill’s speakers

Note: Bluetooth music will be automatically connected next time after the first connection to

Bluetooth.

To disconnect, revisit the network on your mobile phone’s Bluetooth settings and select the “Unpair” option.

8. MAINTENANCE GUIDE

Warning: Be sure to unplug the power plug of the machine before maintaining the product.

• Use cloth to clean product surface.

• Full cleaning will prolong the service life of the product.

• Clean the dust regularly to keep all parts clean. Clean the exposed parts on both sides of the running belt. This

will reduce the accumulation of impurities in the running belt. User must keep their sneakers clean. Avoid placing

foreign objects beneath the running belt and damaging the running board and belt. The surface of the running belt

should be scrubbed with a soapy wet cloth.

• Please be careful not to splash water on the electrical components or under the running belt.

• Check and lock all parts of the treadmill regularly, replace defective parts and/or leave the equipment idle for repair.

1. ADJUSTING THE RUNNING BELT

• Running with a Left Bias

Adjustment method: With the power turned off, take the included 5mm hexagon spanner and turn the left rear roller

bolt 1/4 to the right to tighten the running belt. Turn the power on the treadmill and test the running belt to make sure

that it is centered. Follow this method until the running belt is loosely adjusted to the center.

Tight

• Running with a Right Bias

Adjustment method: With the power turned off, take the included 5mm hexagon spanner and turn the right rear roller

bolt 1/4 turn to the right to tighten the running belt. Turn the power on the treadmill and test the running belt to make

sure that it is centered. Follow this method until the running belt is loosely adjusted to the center.

• Tightening Your Running Belt

The running belt will become loose after using it for a period of time. If the running belt is too loose it can cause it to

slip out of place during use.

Adjustment method: With the power turned off, take the included 5mm hexagon spanner and turn the left and right bolts

of the rear drum 1/4 turn to the right at the same time to tighten the running belt. Turn the power on of the treadmill

and test the tightness of the running belt. Follow this method until the tightness of the running belt is moderate.

Note: When you use a treadmill, the pressure on the running belt is not balanced due to the different force exerted by

both feet when running, causing the running belt to deviate from the center. This kind of deviation is normal. When the

treadmill is not in use the running belt will return to the center.

The running belt cannot be adjusted too tight. This will damage the running belt, increase the pressure on the front/

rear rollers, cause damage to the roller bearings, elicit abnormal noises from the machine and/or other problems.

2. ADD LUBRICATING OIL

Note: Please turn off the power of the machine before lubricating the running belt.

The treadmill is lubricated when it leaves the factory. But it is necessary to check the lubricity of the treadmill

frequently to keep it in its best condition. The treadmill must be lubricated after half a year of use or 80 hours of

operation.

After every 30 hours or 30 days of use, pull the starting belt from the side and reach out to touch the surface of the

treadmill. If you feel the silicone oil, you don’t need to add lubricating oil; if you touch the surface and there is a strong

dry feeling, please follow the instructions below to add lubricating oil.

Note: Only use special lubricants for treadmills.

•

The refueling position is on the lower surface in the middle of the running belt.

(As shown on the right)

• Cut the tip of the lubricant bottle with a small opening to be able to insert it.

• Raise the running belt and insert the tip of the lubricant bottle under the

running belt, allowing the lubricant to be inserted into the middle of the

running board. Put down the running belt and press down with your hand

directly above the area where the lubricant was inserted. Slide the running

belt to spread the oil evenly on the running board.

• After turning on the treadmill, wait one minute for the oil to be applied

evenly, and then you may use the treadmill.

Tight

9. TROUBLESHOOTING CODES

The treadmill will only work if the safety lock key is completely placed in the slot on the dashboard.

Take the clip end section of the safety lock key and attach it to your clothing. In the unlikely event of an accident, pull off the

safety lock key to immediately stop the motor. If you want to continue using the treadmill, put the safety lock key back in.

10. WARM-UP EXERCISE

It is always recommended to start off your workout by stretching prior to exercising. A successful exercise plan must

include warm-up, aerobic and cool-down exercises. The recommended number of times to exercise should be at least

two to three times a week. After a few months, it is recommended to increase the number of times to exercise to four

to five days a week.

Warming-up is an important part of your fitness exercise routine. Moderate warm-ups can help prepare your body for

intense exercise sessions; they allow for your muscles to properly stretch and can help improve blood circulation/pulse

(which helps deliver more oxygen to the muscles). Repeated warm-up exercise can also reduce muscle soreness after an

aerobic exercise. We recommend the following warm-up and cool-down exercises:

1. STRETCH DOWNWARD:

Bend your knees slightly and bend your body forward slowly. Relax your back and

shoulders and touch your toes with both hands. Hold for 10 to 15 seconds, then relax.

Repeat three times.

2. STRETCH YOUR ANKLES:

Sit on a clean cushion and straighten one leg. Put the other leg inward so that it is

close to the straight leg. Try to touch your toes with your hands. Keep it for 10 to 15

seconds, then relax. Repeat each leg three times.

Code Causes Resoluons

E01 Poor connecon between power sup-

ply and controller

1. Check that the connecon between the power supply and the

controller is properly connected

2. The main IC of the controller is not making proper contact and

needs to be ghtened

3. The controller power supply is abnormal. The controller needs to

be replaced

E02 Explosion and impact proof protecon 1. If the motor is exposed or it has been badly damaged, replace the

motor or check the connecon terminals

2. Power cord is damaged, replace the cord or the controller

E05 Over current protecon 1. The weight place on top surpasses the treadmill’s weight capacity

2. The motor is damaged for overworking its limit. The motor needs

to be replaced

E06 Overload protecon

E07 Display panel communicaon error 1. Check if the connecon between the power cord and the

connecon have a poor connecon.

2. The power cord is not properly connected to power outlet. Unplug

and re-insert.

3. The controller’s power supply is abnormal and needs to be replaced

Figure 1

Figure 2

3. EXTENSION OF THE CALF AND FOOT TENDONS:

Stand in front of a wall, facing it, and leave enough room to lean your body forward.

Place your hands against the wall move the left leg forward and slightly bend the knee.

The right leg remains straight in its original spot. Hold it for 10 to 15 seconds, then

relax. Repeat each leg three times.

4. HEAD MOVEMENT:

1-tilt your head to the right and feel the left neck muscle stretch

2-tilt your head back and feel the front neck muscle stretch

3-tilt head to the left and feel the right neck muscle stretch

4-tilt your head to forward and feel the back neck muscle stretch. Relax and repeat

three times.

5. WAIST MOVEMENT:

Slowly lift up both arms and stretch them over your head. Stretch your right arm up as

far as possible towards the ceiling and hold for 1 second then go back to original stand.

Repeat the same action on the left arm. Relax and repeat three times.

Figure 3

Figure 4

Figure 5

Inhaltsverzeichnis

Andere Medic Therapeutics Tretmühle Handbücher

Medic Therapeutics

Medic Therapeutics HOME PLUS Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung