Megger SPG 5-1000 Bedienungsanleitung

SPG 5-1000

Test and Fault Locating System

USER GUIDE

Issue: A (03/2023) - EN

Article number: 128312766

Consultation with Megger

The present system manual has been designed as an operating guide and

for reference. It is meant to answer your questions and solve your problems

in as fast and easy a way as possible. Please start with referring to this

manual should any trouble occur.

In doing so, make use of the table of contents and read the relevant

paragraph with great attention. Furthermore, check all terminals and

connections of the instruments involved.

Should any question remain unanswered or should you need the help of an

authorized service station, please contact:

Megger Limited

Megger Germany GmbH

Archcliffe Road

Kent CT17 9EN

T: +44 1304 502100

F: +44 1304 207342

E: uksales@megger.com

Dr.-Herbert-Iann-Str. 6

D - 96148 Baunach

T: +49 9544 68 – 0

F: +49 9544 22 73

E: sales@sebakmt.com

Megger

This document is copyright of Megger Germany GmbH. The information in this document is subject to

change without notice and should not be construed as a commitment by Megger Germany. Megger

Germany assumes no responsibility for any errors that may appear in this document.

Terms of Warranty

Megger accept responsibility for a claim under warranty brought forward by

a customer for a product sold by Megger under the terms stated below.

Megger warrant that at the time of delivery Megger products are free from

manufacturing or material defects which might considerably reduce their

value or usability. This warranty does not apply to faults in the software

supplied. During the period of warranty, Megger agree to repair faulty parts

or replace them with new parts or parts as new (with the same usability and

life as new parts) according to their choice.

This warranty does not cover wear parts, lamps, fuses, batteries and

accumulators.

Megger reject all further claims under warranty, in particular those from

consequential damage. Each component and product replaced in

accordance with this warranty becomes the property of Megger.

All warranty claims versus Megger are hereby limited to a period of 12

months from the date of delivery. Each component supplied by Megger

within the context of warranty will also be covered by this warranty for the

remaining period of time but for 90 days at least.

Each measure to remedy a claim under warranty shall exclusively be

carried out by Megger or an authorized service station.

This warranty does not apply to any fault or damage caused by exposing a

product to conditions not in accordance with this specification, by storing,

transporting, or using it improperly, or having it serviced or installed by a

workshop not authorized by Megger. All responsibility is disclaimed for

damage due to wear, will of God, or connection to foreign components.

For damage resulting from a violation of their duty to repair or re-supply

items, Megger can be made liable only in case of severe negligence or

intention. Any liability for slight negligence is disclaimed.

Since some states do not allow the exclusion or limitation of an implied

warranty or of consequential damage, the limitations of liability described

above perhaps may not apply to you.

Contents

1Introduction ...............................................................1

2Technical Description...............................................3

2.1 Technical Data...........................................................3

2.2 Scope of delivery and Options.................................4

3Safety .........................................................................6

3.1 General Notes............................................................6

3.2 Safety devices ...........................................................9

3.2.1 FΩ / FU-EP protective device......................................9

3.2.2 Reverse voltage detection.........................................11

3.2.3 Key Switch ................................................................11

3.3 VDE 0104 (EN 50191) clauses................................. 12

3.3.1 Mobile (non-stationary) test unit ................................12

3.3.2 Danger Area..............................................................12

3.3.3 Emergency OFF button.............................................12

4Operating ................................................................. 13

4.1 Setting up the Instrument.......................................13

4.2 Connections and controls ...................................... 14

4.3 Connecting .............................................................. 16

4.3.1 5 Safety Rules...........................................................16

4.3.2 Connection diagramm ...............................................16

4.3.3 Earthing the SPG 5-1000 ..........................................17

4.3.4 Connecting the HV-line to a faulty cable....................19

4.3.5 Seuring the site and open cable ends .......................21

4.3.6 Connecting the SPG 5-1000 to the mains .................21

5Operation ................................................................. 22

5.1 Switching On ........................................................... 22

5.2 Rotary Selector........................................................ 23

5.3 High Voltage HV on................................................. 23

5.4 High voltage is active.............................................. 23

6Functions................................................................. 24

6.1 Setup- Menu ............................................................ 24

6.2 Safety Menu............................................................. 24

6.3 Test Mode ................................................................25

6.3.1 Insulation resistance .................................................26

6.4 Operation mode breakdown recognition...............26

6.5 Prelocating function................................................28

6.6 Pinpointing Mode .................................................... 31

6.6.1 Sound Field method ..................................................31

6.6.2 Step Voltage Method.................................................33

6.7 Burn Mode ............................................................... 34

7Disconnecting electrical connections ...................36

8Care, Maintenance .................................................. 37

Appendix: Available cable data ..................................................38

III

List of Illustrations

Illustr. 1 : FΩ / FU-EP protective device ..............................................9

Illustr. 2 : Controls.............................................................................14

Illustr. 3 : Connections - back............................................................15

Illustr. 4 : Connection diagram ..........................................................16

Illustr. 5 : Connecting to LV cable with sheath...................................19

Illustr. 6 : connecting to a 4- or 5-conductor cable without sheath .....19

Illustr. 7 : Main menu.........................................................................22

Illustr. 8 : Menu safety circuit.............................................................24

Illustr. 9 : Menu testing......................................................................25

Illustr. 10 : Menu breakdown recognition...........................................26

Illustr. 11 : Menu Prelocating cable data ...........................................28

Illustr. 12 : Menu prelocating .............................................................30

Illustr. 13 : Menu pinpointing - acoustic .............................................31

Illustr. 14 : pinpoint locating - Step voltage........................................33

Illustr. 15 : Menu Burn.......................................................................34

1 Introduction

The SPG 5-1000 has been developed for fault locating in low

voltage networks. Its functions are:

DC-Testing,

Breakdown recognition,

Measuring leakage resistance

Prelocating ICEplus,

Pinpoint locating with step voltage or sound field method,

Burning.

No need to use a TDR. ICEplus makes excellent prelocation

possible - even with branched networks. Operation is done

solely with the rotary encoder. For safety reasons the high

voltage setting must be activated with a separate hardware

button.

2 Technical Description

2.1 Technical Data

Display 5.7” display (640 x 480) for

operating, status-

information, input and

test results;

“one button operation“

Testing 0 ... 5000 V DC; timer

Leakage current display 0 ... 1 mA;

0 ... 10 mA;

0 ...100 mA

Insulation resistance 1kΩ... 250 MΩ

measuring

automatic breakdown

recognition 0 ... 5000 V DC

Prelocating ICEplus technique

(Patent pending)

with 0 ... 4 kV surge

Burning 0 ... 500 V ; 1,0 A

0 ... 2000 V ; 0,25 A

0 ... 5000 V ; 0,1 A

Surge 0 ... 2000 V ; max. 1000 J

0 ... 4000 V ; max. 1000 J

Surge rate single pulse or

automatic 3 ... 10 sec.

Sheath fault locating 0 ... 500 V / 2000 V / 5000 V

Pulse ratio /sec. DC / 1:3 / 1:4 / 1:6

Operating temperature -10 ... + 50 °C

Inhaltsverzeichnis

Andere Megger Prüfgeräte Handbücher

Megger

Megger MPRT 8415 Bedienungsanleitung

Megger

Megger PAT120 Bedienungsanleitung

Megger

Megger MIT400/2 Series Bedienungsanleitung

Megger

Megger MFT1800 series Bedienungsanleitung

Megger

Megger MIT510 Bedienungsanleitung

Megger

Megger PAT100 Series Bedienungsanleitung

Megger

Megger HPA 100 AC Bedienungsanleitung

Megger

Megger TRAX ZP-AJ01E Bedienungsanleitung

Megger

Megger OTS 60AF/2 Bedienungsanleitung

Megger

Megger MEG10-01 Bedienungsanleitung

Megger

Megger DET5/4R Bedienungsanleitung

Megger

Megger MTO210 Bedienungsanleitung

Megger

Megger ME1000351 Bedienungsanleitung

Megger

Megger LT310 Bedienungsanleitung

Megger

Megger S1-554/2 Bedienungsanleitung

Megger

Megger PFL40A Bedienungsanleitung

Megger

Megger MIT1020/2 Bedienungsanleitung

Megger

Megger BITE5 Bedienungsanleitung

Megger

Megger SVERKER 900 Bedienungsanleitung

Megger

Megger MFT1500 Series Bedienungsanleitung

Megger

Megger S1-568 Bedienungsanleitung

Megger

Megger SVERKER 650 Bedienungsanleitung

Megger

Megger MIT400 Series Bedienungsanleitung

Megger

Megger PAT32 Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung