Meinberg IMS-M4000 Bedienungsanleitung

MANUAL

IMS-M4000

Modular Sync. System and

NTP Server

21st August 2019

Meinberg Funkuhren GmbH & Co. KG

Front view (Frontansicht) IMS-M4000

Table of Contents

1 Imprint 1

2 Safety instructions for building-in equipment 2

2.1 Additional Safety Hints ........................................... 3

2.2 Supply Voltage ................................................ 3

2.3 Cabling ..................................................... 4

2.4 Safety Hints Antenna ............................................ 4

2.5 Replacing the Lithium Battery ....................................... 5

2.6 Grounding connection M4000 ........................................ 5

3 Quick Start 6

4 The Modular System LANTIME 7

5 Mounting the GPS Antenna 8

5.1 Antenna Cable: ................................................ 9

5.2 Antenna Short-Circuit ............................................ 9

5.3 Antenna Assembly with Surge Voltage Protection ............................ 10

6 40dB Multi GNSS L1 Timing Antenna with Integrated Lightning Protection 11

6.1 GNSS Antenna for Stationary Installation ................................ 11

6.2 GNSS Antenna for Mobile Applications ................................. 13

7 Booting the Single Board Computer 14

8 Conﬁguration User Interface 15

9 The Menues in Detail 16

9.1 Root Menu ................................................... 16

10 The graphical user interfaces 18

11 The WEB Interface 19

12 Attachment: Technical Information 20

12.1 Technical Speciﬁcations LANTIME M4000 Housing .......................... 20

12.2 IMS M4000 Chassis ............................................. 22

12.3 Retroﬁtting the Active Cooling Module - ACM .............................. 23

12.4 Available Modules and Connectors .................................... 24

12.5 TERMINAL (Console) ............................................ 25

12.6 USB Connector ................................................ 25

12.7 Replacement or Installation of a Hot-pluggable IMS Module ..................... 26

12.7.1 Important Hints for hot-pluggable IMS Modules ........................ 27

12.8 IMS Module Options ............................................. 28

12.8.1 Power Supply 100-240 V AC / 100-200 V DC .......................... 28

12.8.2 Power Supply 20-60 V DC ..................................... 29

12.8.3 Power Supply 10-36 V DC ..................................... 29

12.8.4 GPS Clock .............................................. 30

12.8.5 GNSS Clock ............................................. 32

12.8.6 GNS-UC Clock ........................................... 34

12.8.7 PZF Clock .............................................. 36

12.8.8 TCR Clock - Time Code Reader and Generator ......................... 37

12.8.9 RSC Switch Card .......................................... 41

12.8.10 SPT - Single Path Through .................................... 45

12.8.11 LAN-CPU ............................................... 46

12.8.12 MRI - Standard Reference Input Signals ............................ 48

12.8.13 ESI - Telecom Synchronisation References ........................... 50

12.8.14 LNE-GbE: Network Expansion with Gigabit Support and SFP Option ........... 54

12.8.15 HPS-100: PTP / SyncE / Hardware NTP Interface ...................... 61

12.8.16 TSU V3: IEEE-1588 Time Stamp Unit .............................. 64

12.8.17 IMS PIO: PPS oder 10MHz I/O Module ............................ 66

12.8.18 CPE and BPE Output Modules (Frontend - Backend, Eurocard) .............. 68

12.8.19 LIU - Line Interface Unit ...................................... 85

12.8.20 LNO - 10MHz Sinus Output Module ............................... 93

12.8.21 REL1000: Error Relay Module .................................. 95

12.8.22 FDM - Frequency Deviation Monitoring ............................. 97

12.8.23 SCG-U: Studio Clock Generator ................................. 99

12.8.24 SCG-B: Studio Clock Generator Balanced ........................... 101

12.8.25 VSG - Video Sync Generator ................................... 103

13 Declaration of Conformity 106

Date: 21st August 2019 IMS-M4000

1 Imprint

Meinberg Funkuhren GmbH & Co. KG

Lange Wand 9, 31812 Bad Pyrmont / Germany

Phone: + 49 (0) 52 81 / 93 09 - 0

Fax: + 49 (0) 52 81 / 93 09 - 230

Internet: https://www.meinbergglobal.com

Mail: [email protected]

Date: 2019-08-16

Version: 1.11

IMS-M4000 Date: 21st August 2019 1

2 Safety instructions for building-in equipment

This building-in equipment has been designed and

tested in accordance with the requirements of Stan-

dard IEC 60950-1 "Safety of Information Technology

Equipment, including Electrical Business Equipment".

During installation of the building-in equipment in

an end application (i.e. rack) additional requirements

in accordance with Standard IEC60950-1 have to be

taken into account.

NOTE: First attach the case to protective earth -

before you connect the M4000 with the power line

(see chapter Grounding connection M4000).

General Safety instructions

•The building-in equipment has been evaluated for use in oﬃce environment (pollution degree 2) and

may be only used in this environment. For use in rooms with a higher pollution degree more stringent

requirements are applicable.

•The equipment/building-in equipment was evaluated for use in a maximum ambient temperature of 40◦C.

•The building-in equipment may not be opened.

•Protection against ﬁre must be assured in the end application.

•The ventilation opening may not be covered.

For AC Supply 100-240 V AC

•The building-in equipment is a class 1 - equipment and must be connected to an earthed outlet

(TN Power System).

•For safe operation the building-in equipment must be protected by max 16 A fuse in the power installation

system.

•Disconnection of the equipment from mains is done by pulling the mains plug at the outlet. Don’t use the

connector at the module for disconnection from mains.

For DC Supply 100-200 V DC

•The device can be disconnected outside the unit in accordance with the regulations as in IEC 60950-1

(e.g. through primary side line protection).

•Assembling and disassembling of the power connector is only allowed if the device is disconnected from

power supply (e.g. trough primary side line protection).

•All feed lines are suﬃciently protected and dimensioned.

Fuse: T2.5A

Connector Diameter: 1mm2- 2,5mm2/ 17AWG - 13AWG

2 Date: 21st August 2019 IMS-M4000

2 Safety instructions for building-in equipment

2.1 Additional Safety Hints

This manual contains important information for the installation and operation of this device as well as for your

safety. Make sure to read carefully before installing and commissioning the device.

Certain operating conditions may require the observance of additional safety regulations not covered by this

manual. Nonobservance of this manual will lead to a signiﬁcant abatement of the security provided by this

device. Security of the facility where this product is integrated lies in the responsibility of the installer.

The device must be used only for purpose named in this manual, any other use especially opteration above the

limits speciﬁed in this document is considered as improper use.

Keep all documents provided with the device for later reference.

This manual is exclusively for qualiﬁed electricians or by a qualiﬁed electrician trained personnel who are

familiar with the applicable national standards and speciﬁcations, in particular for the construction of high

voltage devices.

2.2 Supply Voltage

WARNING!

This device is powered by a dangerous voltage. Nonobservance of the safety instructions of this manual may

lead to serious damage to persons and property and to danger to life! Installtion, commissioning, maintenance

and operation of this device are to be carried out by qualiﬁed personnel only.

The general safety instructions and standards ( e.g. IEC, DIN, VDE, EN ) for installation and work with

high voltage equipment as well as the respective national standards and laws must be observed.

NONOBSERVANCE MAY LEAD TO SERIOUS DAMAGE TO PERSONS AND PROPERTY AND TO DAN-

GER TO LIFE!

The device may not be opened. Repair services may only be carried out by the manufaturer.

Supply lines for this decice must be equipped via an appropriate switch that must be mounted close to the

device and must be marked as a mains switch for the device.

To ensure safe operation supply mains connected to this decice must be equipped with a fuse and a fault-

current circuit breaker according to the applicable national standards for safe operation.

The device must be connected to a protective earth with low grounding resistance according to the applicable

national rules.

IMS-M4000 Date: 21st August 2019 3

2.3 Cabling

WARNING!

DANGER TO LIFE BY ELECTRICAL SHOCK! NO LIVE WORKING!

Wiring or any other work done the connectors particularly when connectors are opened may never be carried out

when the installation is energized. All connectors must be covered to prevent from accidental contact to life parts.

ALWAYS ENSURE A PROPER INSTALLATION!

2.4 Safety Hints Antenna

WARNING!

DANGER TO LIFE BY ELECTRICAL SHOCK!

Make sure to comply with the occupational health and safety standards when installing the antenna. Never

work without a proper fall protection device!

Do not carry out any installation or maintenance work on the antenna system or cabling when there is a

potential risk of lightning.

Surge Voltage Protector

Due to extremely high currents associated with lightning no surge protection device can provide absolute safety

from the impacts caused by lightning!

4 Date: 21st August 2019 IMS-M4000

2 Safety instructions for building-in equipment

2.5 Replacing the Lithium Battery

Skilled/Service-Personnel only: Replacing the Lithium Battery

The life time of the lithium battery on the receiver boards is at least 10 years. If the need arises to replace the

battery, the following should be noted:

There is a Danger of explosion if the lithium battery is replaced incorrectly. Only identical batteries or

batteries recommended by the manufacturer must be used for replacement.

The waste battery has to be disposed as proposed by the manufacturer of the battery.

2.6 Grounding connection M4000

To ensure a safe operation and to fulﬁl the require-

ments in accordance with IEC 60950-1, the system must

be correctly connected to an equipotential grounding

bus. On the upper left side of the chassis a ground-

ing connector is provided. The mounting components

(without a cable) are included.

1: Screw M4x6

2: Tooth washer M4

3: Plain washer M4

4: Ring or fork lug

5: Nomel washer

Note:

Use a grounding cable with >= 1,5mm2

Please ensure a correct crimp-connection!

IMS-M4000 Date: 21st August 2019 5

Inhaltsverzeichnis

Andere Meinberg Server Handbücher

Meinberg

Meinberg microSync HR100/DC Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME IMS-M500 Bedienungsanleitung

Meinberg

Meinberg LANTIME M200/GPS/RPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME M100/GPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME M600/GPS Bedienungsanleitung

Meinberg

Meinberg LANTIME/GPS Bedienungsanleitung

Meinberg

Meinberg LANTIME M600 MRS Bedienungsanleitung

Meinberg

Meinberg IMS-M1000-S Bedienungsanleitung

Meinberg

Meinberg SyncFire 1500 Bedienungsanleitung

Meinberg

Meinberg LANTIME M300 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg IMS-LANTIME-M1000 Bedienungsanleitung

Meinberg

Meinberg LANTIME M300/GPS Bedienungsanleitung

Meinberg

Meinberg LANTIME M300/MGR Bedienungsanleitung

Meinberg

Meinberg LANTIME M300 Bedienungsanleitung

Meinberg

Meinberg LANTIME M100 Bedienungsanleitung

Meinberg

Meinberg IMS-LANTIME M4000 Bedienungsanleitung

Meinberg

Meinberg LANTIME CPU Expansion Shelf Bedienungsanleitung

Meinberg

Meinberg IMS LANTIME M3000 Bedienungsanleitung

Meinberg

Meinberg IMS-LANTIME M3000 Bedienungsanleitung

Meinberg

Meinberg LANTIME M600 Bedienungsanleitung

Meinberg

Meinberg LANTIME M100/GPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME M150/GPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg IMS-LANTIME M500 Bedienungsanleitung

Meinberg

Meinberg LANTIME/SHS/BGT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung