Mercury Verado 6 Bedienungsanleitung

STORAGE

103

Storage Preparation

The major consideration in preparing your outboard for storage is to

protect it from rust, corrosion, and damage caused by freezing of trapped

water.

The following storage procedures should be followed to prepare your

outboard for out of season storage or prolonged storage (two months or

longer).

! CAUTION

Never start or operate your outboard (even momentarily) without water

circulating through all the cooling water intake holes in the gearcase to

prevent damage to the water pump (running dry) or overheating of the

engine.

FUEL SYSTEM

IMPORTANT: Gasoline containing alcohol (ethanol or methanol) can

cause a formation of acid during storage and can damage the fuel system.

If the gasoline being used contains alcohol, it is advisable to drain as

much of the remaining gasoline as possible from the fuel tank, remote

fuel line, and engine fuel system.

IMPORTANT: This outboard is equipped with a closed fuel system when

the engine is not running. With this closed system, fuel within the engine's

fuel system, other than the fuel tank, will remain stable during normal

storage periods without the addition of fuel treatment stabilizers.

Fill the fuel tank and engine fuel system with treated (stabilized) fuel to

help prevent formation of varnish and gum. Proceed with the following

instructions.

• Portable Fuel Tank ‑ Pour the required amount of Fuel System

Treatment and Stabilizer (follow instructions on container) into fuel

tank. Tip fuel tank back and forth to mix stabilizer with the fuel.

• Permanently Installed Fuel Tank ‑ Pour the required amount of Fuel

System Treatment and Stabilizer (follow instructions on container)

into a separate container and mix with approximately one liter (one

quart) of gasoline. Pour this mixture into fuel tank.

Tube Ref No. Description Where Used Part No.

124

Fuel System

Treatment &

Stabilizer

Fuel tank 802875A1

STORAGE

104

Protecting External Outboard Components

• Touch up any paint nicks. See your dealer for touch‑up paint.

• Spray Quicksilver or Mercury Precision Lubricants Corrosion Guard

on external metal surfaces (except corrosion control anodes).

Tube Ref No. Description Where Used Part No.

120 Corrosion Guard External metal

surfaces

92-802878-5

Protecting Internal Engine Components

IMPORTANT: Refer to Maintenance ‑ Spark Plug Inspection and

Replacement for correct procedure for removing spark plugs.

• Remove pencil coils and spark plugs.

• Spray approximately 30 ml (1 fl. oz.) of Storage Seal Rust Inhibitor

into each spark plug hole.

Tube Ref No. Description Where Used Part No.

119 Storage Seal Rust

Inhibitor Spark plug holes 92-802878-5

• Actuate key/push button start switch to crank the engine through one

start cycle, which will distribute the storage seal throughout the

cylinders.

• Reinstall spark plugs and pencil coils.

Gearcase

• Drain and refill the gearcase lubricant (refer to Maintenance ‑

Gearcase Lubrication).

Positioning Outboard For Storage

Store outboard in an upright (vertical) position to allow water to drain out

of outboard.

! CAUTION

If outboard is stored tilted up in freezing temperature, trapped cooling

water or rain water that may have entered the propeller exhaust outlet

in the gearcase could freeze and cause damage to the outboard.

STORAGE

105

Battery Storage

• Follow the battery manufacturer's instructions for storage and

recharging.

• Remove the battery from the boat and check water level. Recharge

if necessary.

• Store the battery in a cool, dry place.

• Periodically check the water level and recharge the battery during

storage.

Andere Handbücher für Verado 6

Inhaltsverzeichnis

Andere Mercury Außenbordmotor Handbücher

Mercury

Mercury FourStroke 2.5 Bedienungsanleitung

Mercury

Mercury 9.9 Bedienungsanleitung

Mercury

Mercury Marathon - 30 Bedienungsanleitung

Mercury

Mercury 20 Jet Bedienungsanleitung

Mercury

Mercury Optimax 115 Bedienungsanleitung

Mercury

Mercury 73012 Bedienungsanleitung

Mercury

Mercury 200 OptiMax DTS Bedienungsanleitung

Mercury

Mercury 40 FourStroke Tiller Handle Installationsanleitung

Mercury

Mercury 225 3.0 Litre Bedienungsanleitung

Mercury

Mercury XR2 Bedienungsanleitung

Mercury

Mercury Jet OptiMax 110 Bedienungsanleitung

Mercury

Mercury Verado 6 Bedienungsanleitung

Mercury

Mercury 4 4-Stroke Bedienungsanleitung

Mercury

Mercury Racing 500R Bedienungsanleitung

Mercury

Mercury 10 EFI FourStroke Gebrauchsanweisung

Mercury

Mercury 15 FourStroke Bedienungsanleitung

Mercury

Mercury 8 Bigfoot 4-Stroke Bedienungsanleitung

Mercury

Mercury 4.5 Bedienungsanleitung

Mercury

Mercury Jet OptiMax 80 Bedienungsanleitung

Mercury

Mercury 40 CT Bedienungsanleitung

Mercury

Mercury GO BOLDLY 25 EFI Bedienungsanleitung

Mercury

Mercury 75 Bedienungsanleitung

Mercury

Mercury 40 jet fourstroke Bedienungsanleitung

Mercury

Mercury R3-30 Bedienungsanleitung

Beliebte Außenbordmotor Handbücher anderer Marken

Yamaha

Yamaha VF150 Bedienungsanleitung

Sleipner

Sleipner SEP-IP30 Bedienungsanleitung

Suzuki

Suzuki DF 40 Bedienungsanleitung

SELVA MARINE

SELVA MARINE Corse Bedienungsanleitung

TOHATSU

TOHATSU BFT 250A Bedienungsanleitung

KONRAD

KONRAD Series 600B Bedienungsanleitung

Sleipner

Sleipner E-Vision Electric Thruster E300 Bedienungsanleitung

Suzuki

Suzuki DF40A Bedienungsanleitung

IST

IST 18.BF200D Bedienungsanleitung

Side-Power

Side-Power SP 155 TC i Bedienungsanleitung

Quick

Quick BTR250 Bedienungsanleitung

Yamaha

Yamaha VF90 Bedienungsanleitung

Yamaha

Yamaha D150H Bedienungsanleitung

Yanmar

Yanmar ZT350 series Bedienungsanleitung

MotorGuide

MotorGuide X3-40 Bedienungsanleitung

Yamaha

Yamaha 20D Bedienungsanleitung

Torqeedo

Torqeedo Ultralight 403 Bedienungsanleitung

Vetus

Vetus BOWPRO65 Bedienungsanleitung