Door Access Terminal User Manual
Door Access Terminal User Manual
Metra inženiring d.o.o.
IOC Trzin
Špruha 19
SI-1236 Trzin, Slovenia
+386 1 56 10 740
+386 1 56 10 744
www.metra.si
Metra Access Control System
ELDLISS, ELDLISU, ELDLISS_G01, ELDLISU_G01 (ISO14443A/B, ISO 15693)
ELDLLFS, ELDLLFU (LF Multitag)
ELDLLGS, ELDLLGU, ELDLLGS_G01, ELDLLGU_G01 (Legic)
ELDLMFS, ELDLMFU (Mifare, ISO14443A/B)
ELDLSDS, ELDLSDU, ELDLSDS_G01, ELDLSDU_G01 (SkiData)
Declaration of Conformity:
Metra Access Control products have been developed, designed and
manufactured in accordance with the EU directive for Electromagnetic
Compatibility (2004/108/EC).
Door Access Terminal User Manual [rev.4-230611]
2011 Metra inženiring d.o.o.
All Rights reserved.
No part of this manual may be reproduced in any form or by any means without prior written permission of Metra inženiring d.o.o.
The contents of this manual are subject to change without notice.
All efforts have been made to ensure the accuracy of the contents of this manual, however, should any errors be detected, Metra inženiring would greatly appreciate being informed of
them. Metra inženiring d.o.o. can assume no responsibility for any errors in this manual.
Door Access Terminal (DAT) is designed to form a
one-way check point for various types of tickets. It
gives a single relay signal for access mechanisms such
as electric door strike, etc. Normally it is mounted
near door where passage control is needed. It comes
in different versions, according to the type of ticket
and mounting (surface or built-in). Higher security
can be achieved by connecting an Extension Relay
Board.
Door Access Terminal operates on line with Metra
software. It must be connected to Metra NET
Network. When RFID ticket is presented access rights
are checked in the Metra database. If valid the unit
triggers its relay.
Passage on Door Access Terminal for particular ticket
can also be externally controlled by 3rd party SW via
TCP/IP software interface.
Operating parameters are defined in Metra software.
Event data from device is used for further analyses
with this software.
