3| P a g e
INTRODUCTION
Congratulations on the purchase of your new Meyer’s
Manure Spreader. With its optional equipment this is
the simplest, most flexible system on the market today.
With proper operation and preventative maintenance, it
will last for many years.
This SAFETY ALERT SYMBOL means
ATTENTION! BE CAREFUL! YOUR SAFETY IS
INVOLVED! It stresses an attitude of HEADS UP FOR
SAFETY. When you see this symbol, be alert to the
possibility of PERSONAL INJURY and carefully read
themessagethatfollows.
WARNING:
NEVER OPERATE WITHOUT ALL COVERS,
SHIELDS AND GUARDS IN PLACE. KEEP HANDS,
FEET AND CLOTHING AWAY FROM MOVING
PARTS. SOME COVERS AND GUARDS HAVE
BEEN REMOVED FOR ILLUSTRATIVE PURPOSES
ONLY IN THIS MANUAL. FAILURE TO HEED MAY
RESULT IN SERIOUS PERSONAL INJURY OR
DEATH.
At the front of this manual is a Product Registration and
Inspection Certificate. Be sure your dealer has
completed this certificate and forwarded a copy to the
manufacturertovalidatethemanufacturer’s warranty.
The product model and serial number are recorded on this
certificate for your convenience and for proper identification
of your spreader by your dealer and the manufacturer when
orderingrepairparts.
The serial number plate is found on the upper left front
corner of the spreader box or stamped in the left channel at
the front. For information on ordering repair parts, refer to the
repair parts section of this manual. Orders must list the
complete description, correct part number, and total amount
required.
All references to right hand and left hand apply to the
product as viewed from the rear of the machine and facing
the direction of forward travel.
You are urged to study this manual and follow the
instructions carefully. Your efforts will be repaid in better
operation and service as well as a savings in time and repair
expense. Failure to read this manual and understand the
machine could lead to serious injury. If you do not understand
instructions in this manual, contact either your dealer or
Meyer’s Equipment Manufacturing Corp.
This supersedes allprevious published instructions.
Contact Information
Meyer’s Equipment Mfg. Corp.
701 W Bus Cty Rd A
P.O. Box 406
Dorchester, WI 54425
Phone: (715)-654-5200
Fax: (715)-654-5558
Email: emcdorchester@tds.net
