DMC 2000S Dosimeter
15-00007 Page 4 of 65
6.2.2. Dose equivalent saturation 25
6.2.3. Displaying the dose rate measurement 26
6.2.4. Dose rate saturation 26
6.2.5. Fault and alarm indicators 27
6.2.6. Viewing alarm thresholds 27
6.3 Switching to pause mode 29
6.4 Operation in the pause mode 30
6.4.1. Normal display 30
6.4.2. Operation of the selector button 31
7. Alarms 37
7.1.1. Dose pre-alarm 37
7.1.2. Rate pre-alarm 38
7.1.3. Dose alarm 39
7.1.4. Dose rate alarm 39
7.1.5. Time alarm 40
8. Setting operating parameters 41
8.1 In the satellite mode 41
8.2 In the autonomous mode 41
8.3 Modifiable parameters 41
8.4 Modifying parameters 45
8.4.1. Accessing the modification mode 45
8.4.2. Procedures for modifying parameters 46
8.4.3. Example for setting parameters 47
9. Other functions 50
9.1 Emergency start-up 50
9.2 Historical 51
10. Faults 52
10.1.1. Battery low 52
10.1.2. “Defective” battery 53
10.1.3. Historical fault 53
10.1.4. Calibration fault 54
10.1.5. Detector fault 55
10.1.6. E2PROM fault 56
10.1.7. Initialization fault 56
10.1.8. Integrated circuit fault 56
11. Maintenance 57
11.1 Changing the battery 57
12. Technical characteristics 59
12.1 Physical characteristics 59
12.1.1. Isotropic graph 60
12.1.2. Linearity graph 60
12.2 Functional characteristics 61
12.3 Electrical characteristics 61
12.4 Mechanical characteristics 62
12.5 Environmental characteristics 62
