Microlife BP 3BTO-A Bedienungsanleitung

IB BP 3BT0-A(2) V3 2707

Europe / Middle-East / Africa

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

Tel. +41 / 71 727 70 30

Fax +41 / 71 727 70 39

Email [email protected]

www.microlife.com

Asia

Microlife Corporation.

9F, 431, RuiGang Road, NeiHu

Taipei, 114, Taiwan, R.O.C.

Tel. 886 2 8797-1288

Fax.886 2 8797-1283

Email [email protected]

www.microlife.com

North / Central / South America

Microlife USA, Inc.

424 Skinner Blvd., Suite C

Dunedin, FL 34698 / USA

Tel. +1 727 451 0484

Fax +1 727 451 0492

Email [email protected]

www.microlife.com

microlife BP 3BTO-A

Blood Pressure Monitor for Pregnant Women

Instruction Manual (1-11)

Автоматический прибор для измерения артериального

давления и частоты пульса для бepeмeнныx

Руководство по пользованию (12-23)

Тонометр для вагітних

Інструкція для користувачів (24-35)

Blood Pressure Monitor for Pregnant Women

Instruction Manual

Table of Contents

1. Introduction

1.1. Features

1.2. Important information about self-measurement

2. Important Information on the Subject of Blood Pressure and its Measurement

2.1. How does high/low blood pressure arise?

2.2. Which values are normal?

2.3. What can be done, if regular high/low values are obtained?

3. Components of your Blood Pressure Monitor

4. Using your Blood Pressure Monitor

4.1. Inserting the batteries

4.2. Using an mains adapter (special accessory)

4.3. Cuff connection

4.4. Setting the time and date

5. Carrying out a Measurement

5.1. Before the measurement

5.2. Common sources of error

5.3. Fitting the cuff

5.4. Measuring procedure

5.5. Discontinuing a measurement

5.6. Memory – recall of the measurements

5.7. Memory – cancellation of all measurements

6. Error Messages/Malfunctions

7. Care and Maintenance, Recalibration

8. Guarantee

9. Technical Specifications

10. www.microlife.com

1. INTRODUCTION

1.1. Features

Your blood pressure monitor is a fully automatic, digital blood pressure measuring device for use on the

upper arm. This monitor enables very fast and reliable measurement of the systolic and diastolic blood

pressure as well your pulse by use of the oscillometric method.

Up to 20 % of women develop hypertension during pregnancy. This disease (pre-eclampsia or «toxemia»)

affects the final outcome of about 5 % of all pregnancies. Pre-eclampsia is a disorder that occurs only

during pregnancy. It can be recognized by a clear increase in blood pressure and high protein levels in the

urine. The measurement precision of this device has been proven clinically in a comprehensive study carried

out by Professor Andrew Shennan at St. Thomas’ Hospital, London. This study proved the reading reliability

of this monitor during pregnancy and in the presence of pre-eclampsia, making it the first such home-use

monitor that is clinically validated for such use and especially suitable for pregnant women. Of course, this

device can be used also after the pregnancy or by other family members.

Attention!

1.2. Important information about self-measurement

•Self-measurement means Control, not diagnosis or treatment. Your values must always be discussed

with your doctor. Never alter the dosages of any medication without direction from your

doctor.

•The pulse reading is not suitable for checking heart pacemakers!

•In cases of cardiac irregularity (Arrhythmia), measurements made with this instrument should only be

evaluated after consultation with the doctor.

Electromagnetic interference:

The device contains sensitive electronic components. Therefore, avoid strong electrical or electromagnetic

fields in the direct vicinity of the device (e.g. mobile telephones, microwave ovens). These can lead to

temporary impairment of the measuring accuracy.

2. Important Information on the Subject of Blood Pressure and its Measurement

2.1. How does high/low blood pressure arise?

Your blood pressure level is determined in the circulatory center of your brain. Your nervous system allows

your body to adapt or alter blood pressure in response to different situations. Your body alters your pulse

and the width of blood vessels through changes in muscles in the walls of blood vessels.

Your blood pressure reading is highest when the heart pumps or ejects blood – this is called your Systolic

Blood Pressure. Your blood pressure reading is lowest when the heart rests (in-between beats) – this is

called your Diastolic Blood Pressure.

Note: Maintain blood pressure values within a «normal» range(s) in order to prevent particular diseases.

2.2. Which values are normal?

Blood pressure is too high if at rest, the diastolic pressure is above 90 mmHg and/or the systolic blood

pressure is over 140 mmHg. If you obtain readings in this range, consult your doctor immediately. High

blood pressure values over time damage blood vessels, vital organs such as the kidney and even your heart.

When blood pressure values are too low, i.e. systolic values under 100 mmHg and/or diastolic values under

60 mmHg, consult your doctor.

Even with normal blood pressure values, a regular self-check with your blood pressure monitor is

recommended. In this way you can detect possible changes in your values early and react appropriately.

If you are undergoing medical treatment to control your blood pressure, please keep a record of the level of

your blood pressure by carrying out regular self-measurements at specific times of the day. Show these

values to your doctor. Never use the results of your measurements to independently alter drug

doses prescribed by your doctor.

Table for classifying blood pressure values (units mmHg) according to World Health Organization:

Attention! Adjusted values during pregnancy (units mmHg):

Reference: Prof. A.H. Shennan, St. Thomas Hospital, London

2.3. What can be done, if regular increased/low values are obtained?

a) Please consult your doctor.

b) Increased blood pressure values (various forms of hypertension) over time are associated with

considerable risks to health. Blood vessels in your body are endangered due to constriction caused by

deposits in the vessel walls (Arteriosclerosis). This can result in a deficient supply of blood to important

organs (heart, brain, muscles). Additionally, the heart will become structurally damaged.

c) There are many different causes of high blood pressure. We differentiate between the common primary

(essential) hypertension, and secondary hypertension. Secondary hypertension can cause organ

malfunctions. Please consult your doctor for information about the possible origins of your own

increased blood pressure values.

d) There are lifestyle changes you can make to prevent and reduce high blood pressure. These measures

must be part of a healthy lifestyle and include:

Range Systolic

Blood Pressure

Diastolic

Blood Pressure

Measures

Hypotension lower than 100 lower than 60 Consult your doctor

Optimal range between 100 and 120 between 60 and 80 Self-check

Normal range between 120 and 130 between 80 and 85 Self-check

High-normal range between 130 and 140 between 85 and 90 Consult your doctor

Mild hypertension between 140 and 160 between 90 and 100 Consult your doctor

Moderate hypertension between 160 and 180 between 100 and 110 Consult your doctor

Severe hypertension higher than 180 higher than 110 Consult your doctor

immediately

Range Systolic

Blood Pressure

Diastolic

Blood Pressure

Measures

Normal range lower than 140 lower than 90 Self-check

Hypertension higher than 140 higher than 90 Consult your doctor

Severe hypertension higher than 160 higher than 100 Consult your doctor

immediately

A) Eating habits

• Strive for a normal weight as prescribed by your doctor. Reduce overweight!

• Avoid excessive consumption of common salt. (Many «packaged foods» contain high levels of salt).

• Avoid fatty foods. (Packaged foods are frequently high in fats).

B) Previous illnesses

Consistently follow any medical instructions for treating previous illness such as:

• Diabetes (Diabetes mellitus or sugar diabetes)

• Fat metabolism disorder

• Gout

C) Habits

• Eliminate smoking

• Drink only moderate amounts of alcohol

• Restrict your caffeine consumption (Coffee, tea, chocolate, etc.)

D) Physical conditioning

• After a preliminary medical examination, exercise regularly.

• Choose sports which require endurance and avoid those which require strength.

• Avoid reaching the limit of your performance.

• With previous illnesses and/or an age of over 40 years, please consult your doctor before beginning your

exercise activities. Your physician will help you develop an exercise routine that is appropriate for you.

3. Components of the Blood Pressure Monitor

The illustration shows the blood pressure monitor, consisting of:

a) Measuring unit

b) Upper arm cuff

M-size-cuff (22 - 32 cm) and

L-size-cuff (32 - 42 cm)

Mains adapter

power socket

Cuff connection

Start button «M» button (memory)

Time button

4. Using your Blood Pressure Monitor

4.1. Inserting the batteries

Insert batteries immediately after unpacking the device. The

battery compartment is located on the bottom of the device

(see illustration).

a) Remove cover as illustrated

b) Insert the batteries (4 x size AA 1,5V), thereby

observing the indicated polarity.

c) If the battery warning appears in the display, the

batteries are empty and must be replaced.

Attention!

• After the battery warning appears, the device is blocked until

the batteries have been replaced.

• Please use «AA» Long-Life or Alkaline 1.5 V Batteries. The use

of 1.2 V Accumulators is not recommended.

• If the blood pressure monitor is left unused for long periods,

please remove the batteries from the device.

4.2. Using a mains adapter (special accessory)

This blood pressure monitor can be operated with the Microlife mains adapter (output 6 V DC / 600 mA,

DIN plug).

a) Plug the plug into the socket at the back of the

instrument.

b) Plug the mains adapter into a 230 V or 110 V power

socket. Test that power is available by pressing the

O/I button.

Note:

• No power is taken from the batteries while the mains adapter is connected to the instrument.

• If the mains voltage is interrupted during the measurement (e.g. by accidental removal of the mains

adapter from the mains socket), the instrument must be reset by removing the plug from its socket and

re-inserting the connections.

• Please consult a specialist dealer if you have questions relating to the mains adaptor.

4.3. Cuff connection

Insert the cuff tube into the opening provided on the left

side of the instrument, as shown in the diagram.

4.4. Setting the time and date

This blood pressure monitor automatically records the time and date of each measurement. This is very

important information as blood pressure normally varies over the course of a day.

1. After new batteries have been inserted the year is blinking in the display. You can adjust the year by

pressing the «M» button. Press the Time button to confirm and switch to month setting.

2. The correct month can be entered by the «M» button. Press the Time button to confirm and switch to

day setting.

3. Please follow the instructions above to set the day, hour and minutes.

4. Once the minutes have been set and the Time button is pressed, the date and time will be displayed on

the screen.

5. If you want to change the date and time again, please hold the Time button down for about 3 seconds

until the year number starts to flash. Now you can enter the new values as described above.

5. Carrying out a Measurement

5.1. Before the measurement

• Avoid eating, smoking as well as all forms of exertion directly before the measurement. All these

factors influence the measurement result. Try to find time to relax by sitting in an armchair in a quiet

atmosphere for about 5 minutes before measurement.

• Remove any garment that fits closely to your upper arm.

• Always measure on the same arm (normally left).

• Take measurements regularly at the same time of day, since blood pressure changes during the course

of the day.

5.2. Common sources of error

Note: Comparable blood pressure measurements always require the same conditions!

These are normally always quiet conditions.

• All efforts by the patient to support their arm can increase blood pressure. Make sure you are in a

comfortable, relaxed position and do not activate any of the muscles in the measurement arm during

the measurement. Use a cushion for support if necessary.

• If the arm artery lies considerably lower (higher) than the heart, an false reading will be obtained. Each

15 cm difference in height results in a measurement error of 10 mmHg!

• Cuffs that are too narrow or too short result in false measurement values. Selecting the correct cuff is

of extraordinary importance. The cuff size is dependent upon the circumference of the arm (measured in

the center). The permissible range is printed on the cuff. If this is not suitable for your use, please

contact your dealer. Note: Only use clinically approved Microlife Cuffs!

• A loose cuff or a sideways protruding air pocket causes false measurement values.

5.3. Fitting the cuff

a) Push the cuff over the left upper arm so that the tube points in

the direction of the lower arm.

b) Lay the cuff on the arm as illustrated. Make certain that the

lower edge of the cuff lies approximately 2 to 3 cm above the

elbow and that the rubber tube leaves the cuff on the inner side

of the arm.

c) Tighten the free end of the cuff and close the cuff with the Velcro.

d) The cuff should be snug on your upper arm, but not too tight. Any

clothing which restricts the arm (e.g. pullover) must be taken off.

e) Lay your arm on a table (palm upwards) so that the cuff is at the

same height as the heart. Make sure that the tube is not kinked.

Note:

If it is not possible to fit the cuff to the left arm, it can also be placed

on the right. However all measurements should be made using the

same arm.

5.4. Measuring procedure

After the cuff has been appropriately positioned, the measurement can begin:

a) Press the START button. The pump begins to inflate the cuff. The

rising pressure in the cuff is shown in the display.

b) After reaching the inflation pressure, the pump stops and the

pressure gradually falls. The cuff pressures are displayed. In case

that the inflation pressure is not sufficient, the monitor automa-

tically re-inflates to a higher level.

c) When the instrument detects a pulse, the heart symbol in the

display starts to flash and a beep is heard for every heartbeat.

d) A longer beep is sounded when the measurement has been

completed. The systolic, and diastolic blood pressures and pulse

rate now appear in the display.

e) The measurement results are displayed, until you switch the

device off. If no button is pressed for 5 minutes, the device

switches automatically off, to save the batteries.

2–3 cm

tube

mmHg

Andere Handbücher für BP 3BTO-A

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP 3AS1-2 Bedienungsanleitung

Microlife

Microlife BP3AQ1-1 Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife BP A3 PLUS Bedienungsanleitung

Microlife

Microlife BP N2 Easy Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BPB6 Connect Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP B2 Basic Bedienungsanleitung

Microlife

Microlife BP W1 Basic Bedienungsanleitung

Microlife

Microlife BP AG1-40 Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP B3 Comfort PC Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife WatchBP office Bedienungsanleitung

Microlife

Microlife BPB1 Classic Bedienungsanleitung

Microlife

Microlife BP A130 Bedienungsanleitung

Microlife

Microlife BP A6 PC Bedienungsanleitung

Microlife

Microlife WatchBP O3 Bedienungsanleitung

Microlife

Microlife BPB3 BT Bedienungsanleitung

Microlife

Microlife BP A110 Bedienungsanleitung

Microlife

Microlife BP A150 AFIB Bedienungsanleitung

Microlife

Microlife BP W100 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung