Microlife BP W100 Bedienungsanleitung

Microlife BP W100

Europe / Middle-East / Africa

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

Tel. +41 / 71 727 70 30

Fax +41 / 71 727 70 39

Email [email protected]

www.microlife.com

IB BP W100 V13-1 0511

EN Ä1

FR Ä12

NL Ä24

SV Ä36

FI Ä46

DA Ä56

NO Ä66

LV Ä76

LT Ä86

EE Ä96

RU Ä106

DE Ä118

IT Ä129

North / Central / South America

Microlife USA, Inc.

1617 Gulf to Bay Blvd., 2nd Floor Ste A

Clearwater, FL 33755 / USA

Tel. +1 727 442 5353

Fax +1 727 442 5377

Email [email protected]

www.microlife.com

Asia

Microlife Corporation.

9F, 431, RuiGang Road, NeiHu

Taipei, 114, Taiwan, R.O.C.

Tel. 886 2 8797-1288

Fax.886 2 8797-1283

Email [email protected]

www.microlife.com

Microlife BP W100

6 5

AL AM

Guarantee Card BP W100

Name of Purchaser / Nom de l'acheteur / Naam koper /

Inköparens namn / Ostajan

nimi / Forhandlers navn / Kjøpers navn / Pircēja vārds / Pirkėjo pavardė/ Ostja nimi /

Ф.И.О. покупателя /

Name des Käufers /

Nome del rivenditore

Serial Number / Numéro de série / Serienummer / Serienummer / Sarjanumero /

Serienummer / Serienummer / Sērijas numurs / Serijos numeris / Seerianumber /

Серийный номер / Serien-Nr. /

Numero di serie

Date of Purchase / Date d'achat / Datum van aankoop /

Inköpsdatum / Ostopäivä-

määrä / Købsdato / Kjøpsdato / Legādes datums / Pardavimo data / Ostukuupäev /

Дата покупки / Kaufdatum /

Data d’acquisto

Specialist Dealer / Revendeur / Specialist Dealer /

Återförsäljare / Alan kauppias /

Specialforhandler / Spesialist forhandler / Speciālists - pārstāvis / Pardavusi įstaiga /

Ametlik müügiesindaja /

Специализированный дилер / Fachhändler /

Categoria

rivenditore

1BP W100 EN

Display

Dear Customer,

Your new Microlife blood pressure monitor is a reliable medical

instrument for taking measurements on the wrist. It is simple to use,

accurate and comes highly recommended for blood pressure moni-

toring in your home. This instrument was developed in collaboration

with physicians and clinical tests prove its measurement accuracy to

be very high.*

Please read through these instructions carefully so that you under-

stand all functions and safety information. We want you to be happy

with your Microlife product. If you have any questions, problems or

want to order spare parts, please contact Microlife-Customer

Service. Your dealer or pharmacy will be able to give you the address

of the Microlife dealer in your country. Alternatively, visit the Internet

at www.microlife.com where you will find a wealth of invaluable

information on our products.

Stay healthy – Microlife AG!

* This instrument is clinically tested according to the British Hyper-

tension Society (BHS) protocol. Highest possible grading for Systolic

(A) and Diastolic (A) measurement accuracy.

Microlife BP W100 EN

1ON/OFF Button

2Display

3Battery Compartment

4Cuff

5M-Button (Memory)

6Time Button

7Systolic Value

8Diastolic Value

9Pulse

AT Date/Time

AK Alarm Time

AL Stored Value

AM Heart Arrhythmia Indicator

AN Pulse Rate

AO Battery Display

Read the instructions carefully before using this device.

Table of Contents

1. Important Facts about Blood Pressure and Self-Measurement

•How do I evaluate my blood pressure?

2. Using the Instrument for the First Time

•Activating the fitted batteries

•Setting the date and time

3. Taking a Blood Pressure Measurement using this Instrument

4. Appearance of the Heart Arrhythmia Indicator for early

Detection

5. Data Memory

•Viewing the stored values

•Memory full

•Clearing all values

•How not to store a reading

6. Setting the Alarm Function

7. Battery Indicator and Battery change

•Low battery

•Flat battery – replacement

•Using rechargeable batteries

8. Error Messages

9. Safety, Care, Accuracy Test and Disposal

•Safety and protection

•Instrument care

•Cleaning the cuff

•Accuracy test

•Disposal

10. Guarantee

11. Technical Specifications

Guarantee Card

1. Important Facts about Blood Pressure and Self-

Measurement

•

Blood pressure

is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the

systolic

(upper) value and the

diastolic

(lower) value, are always measured.

•The instrument also indicates the pulse rate (the number of times

the heart beats in a minute).

3BP W100 EN

•Permanently high blood pressure values can damage your

health and must be treated by your doctor!

•Always discuss your values with your doctor and tell him/her if

you have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

•A number of factors can affect the accuracy of measure-

ments taken on the wrist. In some cases, the result may differ

from the measurement taken on the upper arm. We therefore

advise you to compare these values with those produced by the

upper arm measurement and discuss them with your doctor.

•Enter your readings in the enclosed blood pressure diary. This

will give your doctor a quick overview.

•

There are many causes of excessively

high blood pressure

values

. Your doctor will explain them in more detail and offer treat-

ment where appropriate. Besides medication, relaxation tech-

niques, weight loss and exercise can also lower your blood pressure.

•Under no circumstances should you alter the dosages of

any drugs prescribed by your doctor!

•Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed. Take at least two measure-

ments per day, one in the morning and one in the evening.

•It is quite normal for two measurements taken in quick succession

to produce significantly different results.

•Deviations between measurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these situ-

ations are completely different.

•Several measurements provide a much clearer picture than just

one single measurement.

•Leave a small break of at least 15 seconds between two

measurements.

•If you are pregnant, you should monitor your blood pressure very

closely as it can change drastically during this time!

•If you suffer from an irregular heartbeat (arrhythmia, see

«Section 4.»), measurements taken with this instrument should

only be evaluated after consultation with your doctor.

•The pulse display is not suitable for checking the

frequency of heart pacemakers.

How do I evaluate my blood pressure?

The higher value is the one that determines the evaluation. Example:

a readout value between 150/85 or 120/98 mmHg indicates «blood

pressure too high».

2. Using the Instrument for the First Time

Activating the fitted batteries

Pull out the protective strip projecting from the battery compartment 3.

Setting the date and time

3. Taking a Blood Pressure Measurement using this

Instrument

Table for classifying blood pressure values in adults in accordance

with the World Health Organisation (WHO) in 2003. Data in mmHg.

Range Systolic Diastolic Recommendation

blood pressure

too low z100 z60 Consult your doctor

1. blood pressure

optimum 100 - 120 60 - 80 Self-check

2. blood pressure

normal 120 - 130 80 - 85 Self-check

3. blood pressure

slightly high 130 - 140 85 - 90 Consult your doctor

4. blood pressure

too high 140 - 160 90 - 100 Seek medical advice

5. blood pressure

far too high 160 - 180 100 - 110 Seek medical advice

6. blood pressure

dangerously high 180 y110 yUrgently seek

medical advice!

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 5. To

confirm and then set the month, press the time button 6.

2. You can now set the month using the M-button. Press the time

button to confirm and then set the day.

Please follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts to

flash. Now you can enter the new values as described above.

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the

measurement.

5BP W100 EN

4. Appearance of the Heart Arrhythmia Indicator for

early Detection

This symbol

indicates that certain pulse irregularities were detected

during the measurement. In this case, the result may deviate from your

normal blood pressure – repeat the measurement. In most cases, this is

no cause for concern. However, if the symbol appears on a regular basis

(e.g. several times a week with measurements taken daily) we advise you

to tell your doctor. Please show your doctor the following explanation:

Sit down for at least 5 minutes before the measurement and relax.

3. Always take the measurement on the left arm while in a sitting

position.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in

the pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a

wrist diameter of 13.5 to 21.5 cm (5.25 - 8.5 inches).

7. Support your arm in a relaxed position and ensure that the

instrument is at the same height as your heart.

8. Press the ON/OFF button 1to start the measurement.

9. The cuff will now pump up automatically. Relax, do not move

and do not tense your arm muscles until the measurement

result is displayed. Breathe normally and do not talk.

10.

When the correct pressure is reached, the pumping stops and the

pressure falls gradually. If the required pressure was not reached,

the instrument will automatically pump some more air into the cuff.

11. During the measurement, the heart symbol AN flashes in the

display and a beep sounds every time a heartbeat is detected.

12.

The result, comprising the systolic

and the diastolic

blood

pressure and the pulse

is displayed and longer beep is heard.

Note also the explanations on further displays in this booklet.

13. Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off

automatically after approx. 1 min.).

)You can stop the measurement at any time by pressing the

ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-

sure sensation).

5. Data Memory

At the end of a measurement, this instrument automatically stores

each result, including date and time.

Viewing the stored values

Press the M-button 5briefly, when the instrument is switched off.

The display first shows «M» AL and then a value, e.g. «M 17». This

means that there are 17 values in the memory. The instrument then

switches to the last stored result.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

Memory full

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the instrument must have been

switched off beforehand) until «CL» appears and then release the

button. To permanently clear the memory, press the M-button while

«CL» is flashing. Individual values cannot be cleared.

How not to store a reading

Press the ON/OFF button 1while the reading is being displayed.

Keep the button pressed until «M» AL is flashing and then release it.

Confirm by pressing the M-button.

Information for the doctor on frequent appearance of the

Arrhythmia indicator

This instrument is an oscillometric blood pressure monitor that also

analyses pulse frequency during measurement. The instrument is

clinically tested.

The arrhythmia symbol is displayed after the measurement, if pulse

irregularities occur during measurement. If the symbol appears

more frequently (e.g. several times per week on measurements

performed daily) we recommend the patient to seek medical advice.

The instrument does not replace a cardiac examination, but serves

to detect pulse irregularities at an early stage.

When the memory has stored 200 results, the memory is full.

From this point onwards, a new measured value is stored by

overwriting the oldest value.

7BP W100 EN

6. Setting the Alarm Function

This instrument allows you to set 2 alarm times at which an alarm

signal will then be triggered. This can be a useful aid, for instance as

a reminder to take medication.

7. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

will flash as soon as the instrument is switched on (partly filled battery

displayed). Although the instrument will continue to measure reliably,

you should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AO will flash as soon

as the instrument is switched on (flat battery displayed). You cannot

take any further measurements and must replace the batteries.

To set an alarm time, press the time button

(the instrument must

have been switched off beforehand) and immediately afterwards

the M-button

and hold both down until the bell symbol

appears in the bottom left of the display. Then release both buttons.

The flashing «

» in the display indicates that the first alarm time

can now be set.

2. Press the time button to set the hours – the hour display flashes

and pressing the M-button allows you to set the alarm hour. To

confirm, press the time button.

3. The minute display will now flash. The minutes can be set using

the M-button. To confirm, press the time button again.

The bell symbol will now flash. Use the M-button to select whether

the alarm time is to be active (bell) or inactive (crossed-out bell). To

confirm, press the time button.

To set a second alarm time, proceed as above but if the «

» flashes,

press the M-button to select «

» and confirm with the time button.

An active alarm time is indicated by the bell symbol in the display.

The alarm will sound at the set time every day.

To switch-off the alarm when it is sounding, press the ON/OFF button

To permanently switch off the alarm, proceed as above and select the

crossed-out bell symbol. This will then disappear from the display.

The alarm times must be re-entered each time the batteries are

replaced.

1. Open the battery compartment 3by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

To set date and time, follow the procedure described in «Section 2.».

Using rechargeable batteries

You can also operate this instrument using rechargeable batteries.

8. Error Messages

If an error occurs during the measurement, the measurement is inter-

rupted and an error message, e.g. «ERR 3», is displayed.

)

The memory retains all values although date and time (and

possibly also set alarm times) must be reset – the year number

therefore flashes automatically after the batteries are replaced.

)Use 2 new, long-life 1.5V, size AAA batteries.

)Do not use batteries beyond their date of expiry.

)Remove batteries if the instrument is not going to be used for

a prolonged period.

)Only use «NiMH» type reusable batteries.

)Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

instrument as they may become damaged (total discharge as

a result of low use of the instrument, even when switched off).

)Always remove the rechargeable batteries if you do not intend

to use the instrument for a week or more.

)Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

Error Description Potential cause and remedy

ERR 1

» Signal too

weak The pulse signals on the cuff are too weak.

Re-position the cuff and repeat the

measurement.*

ERR 2

» Error signal During the measurement, error signals were

detected by the cuff, caused for instance by

movement or muscle tension. Repeat the

measurement, keeping your arm still.

ERR 3

» No pressure

in the cuff An adequate pressure cannot be generated

in the cuff. A leak may have occurred. Check

that the cuff is correctly connected and is

not too loose. Replace the batteries if neces-

sary. Repeat the measurement.

ERR 5

» Abnormal

result Themeasuringsignals are inaccurateandno

result can therefore be displayed. Read

through the checklist for performing reliable

measurements and then repeat the

measurement.*

Andere Handbücher für BP W100

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP3MY1-1P Bedienungsanleitung

Microlife

Microlife BP A100 Plus Bedienungsanleitung

Microlife

Microlife XLSC Bedienungsanleitung

Microlife

Microlife WatchBP office Bedienungsanleitung

Microlife

Microlife BP W90 Bedienungsanleitung

Microlife

Microlife BP A100 Plus Bedienungsanleitung

Microlife

Microlife MAM Easy BP A3 Easy Bedienungsanleitung

Microlife

Microlife BP B2 Basic Bedienungsanleitung

Microlife

Microlife WatchBP Office Central Bedienungsanleitung

Microlife

Microlife BP W100 Bedienungsanleitung

Microlife

Microlife BP3GU1-8X Bedienungsanleitung

Microlife

Microlife BP A3 PLUS Bedienungsanleitung

Microlife

Microlife BP 3SZ1-1 Bedienungsanleitung

Microlife

Microlife aponorm Mobil Slim Bedienungsanleitung

Microlife

Microlife BP3MC1-PC Bedienungsanleitung

Microlife

Microlife BPB3 AFIB Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife WatchBP Office Vascular Bedienungsanleitung

Microlife

Microlife BP W10 Bedienungsanleitung

Microlife

Microlife aponorm Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife WatchBP Home A Bedienungsanleitung

Microlife

Microlife BP B1 Classic Bedienungsanleitung

Microlife

Microlife BP Basic Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung