Microlife BP 3BTO-H Bedienungsanleitung

IB BP 3BT0-H Var4 4306

Europe / Middle-East / Africa

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

Tel. +41 / 71 727 70 30

Fax +41 / 71 727 70 39

Email [email protected]

www.microlife.com

Asia

Microlife Corporation.

9F, 431, RuiGang Road, NeiHu

Taipei, 114, Taiwan, R.O.C.

Tel. 886 2 8797-1288

Fax.886 2 8797-1283

Email [email protected]

www.microlife.com

North / Central / South America

Microlife USA, Inc.

424 Skinner Blvd., Suite C

Dunedin, FL 34698 / USA

Tel. +1 727 451 0484

Fax +1 727 451 0492

Email [email protected]

www.microlife.com

microlife BP 3BTO-H

Semi-automatic Blood Pressure Monitor

Instruction Manual (1-11)

Полуавтоматический прибор для измерения

артериального давления и частоты пульса

–ÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ÔÓÎ¸ÁÓ‚‡ÌË˛ (12-23)

Pó∏automatyczny ciÊnieniomierz krwi

Instrukcja u˝ywania (24-35)

Félautomata vérnyomásmérô

Használati útmutató (36-47)

Semi-automatic Blood Pressure Monitor

Instruction Manual

Table of contents

1. Introduction

1.1 Features

1.2 Important information about self-measurement

2. Important information on the subject of blood-pressure and its measurement

2.1. How does high/low blood-pressure arise?

2.2. Which values are normal?

2.3. What can be done, if regular high/low values are obtained?

3. The various components of the blood-pressure monitor

4. Putting the blood-pressure monitor into operation

4.1. Inserting the batteries

4.2. Tube connection

5. Carrying out a measurement

5.1. Before the measurement

5.2. Common sources of error

5.3. Fitting the cuff

5.4. Measuring procedure

5.5. Inflating further

5.6. Discontinuing a measurement

5.7. Memory – displaying the last measurement

6. Error messages/malfunctions

7. Care and maintenance, recalibration

8. Guarantee

9. Technical specifications

10. www.microlife.com

1. Introduction

1.1. Features

The blood-pressure monitor is a semi-automatic, digital blood-pressure measuring device for use on the up-

per arm, which enables very fast and reliable measurement of the systolic and diastolic blood-pressure as

well as the pulse frequency by way of the oscillometric method of measuring.

The device offers a very high and clinical tested measurement accuracy and has been designed to provide a

maximum of user-friendliness.

Thanks to the large LCD display, both operational status and cuff pressure are visible for the entire duration

of the measurement.

Before using, please read through this instruction manual carefully and then keep it in a safe place. For fur-

ther questions on the subject of blood-pressure and its measurement, please contact your doctor.

Attention!

1.2. Important information about self-measurement

• Do not forget: self-measurement means Control,not diagnosis or treatment. Unusual values must

always be discussed with your doctor. Under no circumstances should you alter the dosages of any

drugs prescribed by your doctor.

• The pulse display is not suitable for checking the frequency of heart pacemakers!

• In cases of cardiac irregularity (Arrhythmia), measurements made with this instrument should only be

evaluated after consultation with the doctor.

Electromagnetic interference:

The device contains sensitive electronic components (Microcomputer). Therefore, avoid strong electrical or

electromagnetic fields in the direct vicinity of the device (e.g. mobile telephones, microwave cookers).

These can lead to temporary impairment of the measuring accuracy.

2. Important information on the subject of blood-pressure and its measurement

2.1. How does high/low blood-pressurearise?

The level of blood-pressure is determined in a part of the brain, the so-called circulatory centre, and

adapted to the respective situation by way of feedback via the nervous system.

Toadjust the blood-pressure, the strength and frequency of the heart (Pulse), as well as the width of circu-

latoryblood vessels is altered. The latter is effected by way of fine muscles in the blood-vessel walls.

The level of arterial blood-pressure changes periodically during the heart activity: During the «blood ejec-

tion» (Systole) the value is maximal (systolic blood-pressurevalue), at the end of the heart’s«rest period»

(Diastole) minimal (diastolic blood-pressurevalue).

The blood-pressure values must lie within certain normal ranges in order to prevent particular diseases.

2.2 Which values are normal?

Blood pressure is too high if at rest, the diastolic pressure is above 90 mmHg and/or the systolic blood-

pressure is over 140 mmHg. In this case, please consult your doctor immediately. Long-term values at this

level endanger your health due to the associated advancing damage to the blood vessels in your body.

With blood-pressure values that are too low, i.e. systolic values under 100 mmHg and/or diastolic values

under 60 mmHg, likewise, please consult your doctor.

Even with normal blood-pressure values, a regular self-check with your blood-pressure monitor is recom-

mended. In this way you can detect possible changes in your values early and react appropriately.

If you are undergoing medical treatment to control your blood pressure, please keep a record of the level of

your blood pressure by carrying out regular self-measurements at specific times of the day. Show these val-

ues to your doctor. Never use the results of your measurements to alter independently the drug

doses prescribed by your doctor.

Table for classifying blood-pressure values (units mmHg) according to World Health Organization:

Range Systolic Diastolic Measures

Blood-pressure Blood-pressure

Hypotension lower than 100 lower than 60 Check with your doctor

Normal range between 100 and 140 between 60 and 90 Self-check

Mild hypertension between 140 and 160 between 90 and 100 Consult your doctor

Moderately serious between 160 and 180 between 100 and 110 Consult your doctor

hypertension

Serious hypertension higher than 180 higher than 110 Consult your doctor

immediately

☞Further information

• If your values are mostly standard under resting conditions but exceptionally high under conditions of

physical or psychological stress, it is possible that you are suffering from so-called «labile hyperten-

sion». Please consult your doctor if you suspect that this might be the case.

• Correctly measured diastolic blood-pressure values above 120 mmHg require immediate medical

treatment.

2.3. What can be done, if regular increased/low values areobtained?

a) Please consult your doctor.

b) Increased blood-pressure values (various forms of hypertension) are associated long- and medium term

with considerable risks to health. This concerns the arterial blood vessels of your body, which are

endangered due to constriction caused by deposits in the vessel walls (Arteriosclerosis). A deficient

supply of blood to important organs (heart, brain, muscles) can be the result. Furthermore, with

long-termcontinuously increased blood-pressure values, the heart will become structurally damaged.

c) There are many different causes of the appearance of high blood pressure. We differentiate between

the common primary (essential) hypertension, and secondary hypertension. The latter group can be as-

cribed to specific organic malfunctions. Please consult your doctor for information about the possible

origins of your own increased blood pressure values.

d) There are measures which you can take, not only for reducing a medically established high blood

pressure, but also for prevention. These measures are part of your general way of life:

A) Eating habits

• Strive for a normal weight corresponding to your age. Reduce overweight!

• Avoid excessive consumption of common salt.

• Avoid fatty foods.

B) Previous illnesses

Follow consistently any medical instructions for treating previous illness such as:

• Diabetes (Diabetes mellitus)

• Fat metabolism disorder

• Gout

C) Habits

• Give up smoking completely

• Drink only moderate amounts of alcohol

• Restrict your caffeine consumption (Coffee)

D) Physical constitution

• After a preliminary medical examination, do regular sport.

• Choose sports which require stamina and avoid those which require strength.

• Avoid reaching the limit of your performance.

• With previous illnesses and/or an age of over 40 years, please consult your doctor before beginning

your sporting activities. He will advise you regarding the type and extent of types of sport that are

possible for you.

3. The various components of the blood-pressure monitor

The illustration shows the blood-pressure monitor, consisting of:

a) Measuring unit

b) Cuff: optional

Type M,for arm circumference 22–32 cm or

Type L,for arm circumference 32–42 cm

(available as special accessory)

O/I

Memory button

Cuff connection

LCD-display

4. Putting the blood-pressure monitor into operation

4.1. Inserting the batteries

After you have unpacked your device, first insert the bat-

teries. The battery compartment is located on the under-

side of the device (see illustration).

a) Remove cover as illustrated

b) Insert the batteries (4 x size AA 1,5 V), thereby ob-

serving the indicated polarity.

c) If the battery warning appears in the display, the bat-

teries are empty and must be replaced by new ones.

Attention!

• After the battery warning appears, the device is

blocked until the batteries have been replaced.

• Please use «AA» Long-Life or Alkaline 1.5 V Batteries.

The use of 1.2 V Accumulators is not recommended.

• If the blood-pressure monitor is left unused for long

periods, please remove the batteries from the device.

Functional check:

Hold on the O/I button down to test all the display elements.

When functioning correctly all segments must appear.

4.2. Tube connection

Cuff (1-tube cuff & T-connector):

Set up (or check) the tube connections between cuff, in-

strument and pump ball as shown in the diagram.

5. Carrying out a measurement

5.1. Beforethe measurement

• Avoid eating, smoking as well as all forms of exertion directly before the measurement. All these

factors influence the measurement result. Try and find time to relax by sitting in an armchair in a quite

atmospherefor about 5 minutes beforethe measurement.

• Remove any garment that fits closely to your upper arm.

• Measure always on the same arm (normally left).

• Attempt to carry out the measurements regularly at the same time of day, since the blood-pressure

changes during the course of the day.

5.2. Common sources of error

Note: Comparable blood-pressure measurements always require the same conditions! These are normally

always quiet conditions.

• All efforts by the patient to support the arm can increase the blood-pressure. Make sure you are in a

comfortable, relaxed position and do not activate any of the muscles in the measurement arm during

the measurement. Use a cushion for support if necessary.

• If the arm artery lies considerably lower (higher) than the heart, an erroneously higher (lower) blood-

pressure will be measured! (Each 15 cm difference in height results in a measurement error of

10 mmHg!)

• Cuffs that are too narrow or too short result in false measurement values. Selecting the correct cuff is

of extraordinary importance. The cuff size is dependent upon the circumference of the arm (measured

in the centre). The permissible range is printed on the cuff. If this is not suitable for your use, please

contact your dealer. Note: Only use clinically approved Original-Cuffs!

• A loose cuff or a sideways protruding air-pocket causes false measurement values.

5.3. Fitting the cuff

a) Push the cuff over the left upper arm so that the tube

points in the direction of the lower arm.

b) Lay the cuff on the arm as illustrated. Make certain

that the lower edge of the cuff lies approximately 2 to

3cm above the elbow and that the rubber tube leaves

the cuff on the inner side of the arm.

Important! The mark (ca. 3 cm long bar) must lie ex-

actly over the artery which runs down the inner side

of the arm.

c) Tighten the free end of the cuff and close the cuff

with the closer.

d) There must be no free space between the arm and

the cuffas this would influence the result. Clothing

must not restrict the arm. Any piece of clothing which

does (e.g. a pullover) must be taken off.

e) Securethe cuff with the Velcro closer in such a way

that it lies comfortably and is not too tight. Lay the

arm on the table (palm upwards) so that the cuff is at

the same height as the heart. Make surethat the

tube is not kinked.

Comment:

If it is not possible to fit the cuffto the left arm, it canalso

be placed on the right one. However all measurements

should be made using the same arm

2–3 cm

tube

5.4. Measuring procedure

After the cuff has been appropriately positioned, themeasurement can begin:

a) Switch on the instrument by pressing the O/I-Memory button. The tube

should not yet be attached to the instrument. The following appears in

the display for 2 seconds: (Diag.)., A short be-be-beep follows to indicate

that the instrument has equilibrated with the pressure of the surround-

ings and the measurement can therefore begin. A «0» is shown in the

display.

b) Plug the T-connecting piece or the free end of the tube into the left-hand

side of the instrument.

c) Grasp the pump ball with your free hand and Inflate the cuff to a pres-

sure at least 40 mmHg higher than the expected systolic pressure. If you

do not know the value of this pressure, inflate to a value of approximate-

ly 160–180 mmHg. The cuff pressure is shown continuously on the LCD.

d) After the inflation process lay down the pump ball and remain in a quiet

and relaxed sitting position. The measurement now proceeds on its own.

If no measurement takes place and all that appears in the display is a

flashing, upwards pointing arrow, see below under «Inflate further».

When the instrument detects a pulse, a heart symbol in the display starts

to flash and a beep is heardfor every heart beat.

e) When the measurement has been concluded, a long peep tone sounds.

The measured systolic and diastolic blood-pressure values as well as the

pulse frequency are now displayed. The cuff pressure can now be quickly

released by pressing the release valve at the pump ball.

5.5. Inflating further

If the cuffis not inflated sufficiently,the measurement is

broken offafter a few seconds and a flashing arrow point-

ing upwards appears in the display.

It is then necessary to inflate further to at least 20 mmHg

higher than the previous value.

The instruction to inflate further can appear several times

if the pressure is still not sufficient.

Attention:

If the cuff is inflated too far (over 300 mmHg), «HI» ap-

pears in the display and a warning signal is sounded. The

cuffpressuremust then be immediately released using the

quick-release valve) at the pump ball)!

As soon as the cuff is inflated sufficiently and the mea-

surement is proceeding, continue as described under

points d–e.

Andere Handbücher für BP 3BTO-H

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP A3 PLUS Bedienungsanleitung

Microlife

Microlife BP 3AS1-2 null

Microlife

Microlife BP W3 Comfort Bedienungsanleitung

Microlife

Microlife BP W3 Comfort Bedienungsanleitung

Microlife

Microlife BP W1 Basic Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife aponorm Basis Plus Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP A100 Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife BP A7 Touch Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife BP AG1-40 Bedienungsanleitung

Microlife

Microlife BP A6 PC Bedienungsanleitung

Microlife

Microlife BP A130 Bedienungsanleitung

Microlife

Microlife bp3gx1-5x Bedienungsanleitung

Microlife

Microlife BP A3L PC Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP B1 Classic Bedienungsanleitung

Microlife

Microlife WatchBP Office Central Bedienungsanleitung

Microlife

Microlife BP B2 Basic Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung