Microlife BP W100 Bedienungsanleitung

IB BP W100 EN-RU 3919

Прибор для измерения артериального

давления и частоты пульса

BP W100

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

www.microlife.com

EN 1

RU  12

Уполномоченный представитель производителя

«Микролайф» в России

ООО «МИП-Тест», 123001 Москва, Ермолаевский пер., д.22-26, стр.1 Телефоны

бесплатной горячей линии:

Часы работы: пн.-пт. 09:00 - 17:00 (время московское)

для Москвы: +7 (499) 390 18 33

для регионов: 8 800 550 10 52

Производитель

Microlife AG, Швейцария

Адрес: Espenstrasse 139, 9443 Widnau, Switzerland

Web-сайт: www.microlife.com

Место производства:

ONBO Electonic (Shenzhen) Co., Ltd., Китай

Адрес: No. 497, Ta Laneg Nan Road, Ta Laneg Street,

Baoan District, Shenzhen, China

Сделано в Китае

Microlife BP W100

6 5

AL AM

BP W100Guarantee Card

Name of Purchaser /

Ф.И.О. покупателя

Serial Number /

Серийный номер

Date of Purchase /

Дата покупки

Specialist Dealer /

Специализированный дилер

1BP W100 EN

Display

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

Dear Customer,

Your new Microlife blood pressure monitor is a reliable medical device

for taking measurements on the wrist. It is simple to use, accurate and

comes highly recommended for blood pressure monitoring in your

home. This device was developed in collaboration with physicians and

clinical tests prove its measurement accuracy to be very high.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our products.

Stay healthy – Microlife AG!

* This device is clinically tested according to the British and Irish

Hypertension Society (BIHS) protocol. Highest possible grading for

Systolic (A) and Diastolic (A) measurement accuracy.

Microlife BP W100 EN

1ON/OFF button

2Display

3Battery Compartment

4Cuff

5M-button (memory)

6Time Button

7Systolic Value

8Diastolic Value

9Pulse Rate

AT Date/Time

AK Alarm Time

AL Stored Value

AM Heart Arrhythmia Indicator

AN Pulse

AO Battery Display

Table of Contents

1. Explanation of symbols

2. Important Facts about Blood Pressure and Self-Measure-

ment

• How do I evaluate my blood pressure?

3. Using the Device for the First Time

• Activating the fitted batteries

• Setting the date and time

4. Taking a Blood Pressure Measurement

5. Appearance of the Heart Arrhythmia Indicator for early

Detection

6. Data Memory

• Viewing the stored values

• Memory full

• Clearing all values

• How not to store a reading

7. Setting the Alarm Function

8. Battery Indicator and Battery change

• Low battery

• Flat battery – replacement

• Using rechargeable batteries

9. Error Messages

10. Safety, Care, Accuracy Test and Disposal

• Safety and protection

•Devicecare

• Cleaning the cuff

• Accuracy test

•Disposal

11. Guarantee

12. Technical Specifications

1. Explanation of Symbols

Batteries and electronic devices must be disposed of in

accordance with the locally applicable regulations, not with

domestic waste.

Read the instructions carefully before using this device.

Type BF applied part

Keep dry

Conformity mark

3BP W100 EN

2. Important Facts about Blood Pressure and Self-

Measurement



Blood pressure

is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the

systolic

(upper) value and the

diastolic

(lower) value, are always measured.

The device indicates the pulse rate (the number of times the heart

beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell him/her if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.



A number of factors can affect the accuracy of measurements

taken on the wrist.

In some cases, the result may differ from the

measurement taken on the upper arm. We therefore advise you to

compare these values with those produced by the upper arm

measurement and discuss them with your doctor.

Enter your readings in the enclosed blood pressure diary. This

will give your doctor a quick overview.



There are many causes of excessively

high blood pressure

values

. Your doctor will explain them in more detail and offer treat-

ment where appropriate. Besides medication, relaxation techniques,

weight loss and exercise can also lower your blood pressure.

Type approval of measuring device

Serial number

Catalogue number

Manufacturer

Class II equipment

Operating

Operating temperature restriction

10 - 40 °C

Storage

Storage temperature restriction

-20 - +55 °C

CE Marking of Conformity

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.



Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses.

You should

therefore take your measurements in the same quiet conditions

and when you feel relaxed!

Take at least two measurements per

day, one in the morning and one in the evening.

It is quite normal for two measurements taken in quick succession

to produce significantly different results.

Deviations between measurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide a much clearer picture than just

one single measurement.

Leave a small break of at least 15 seconds between two

measurements.

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

If you suffer from an irregular heartbeat (arrhythmia, see

«Section 5.»), measurements taken with this device should only

be evaluated after consultation with your doctor.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

How do I evaluate my blood pressure?

The higher value is the one that determines the evaluation. Example:

a readout value between 150/85 or 120/98 mmHg indicates «blood

pressure too high».

Table for classifying blood pressure values in adults in accordance

with the World Health Organisation (WHO) in 2003. Data in mmHg.

Range Systolic Diastolic

Recommenda-

tion

1. blood pressure

normal

< 120 < 80 Self-check

2. blood pressure

normal

120 - 129 80 - 84 Self-check

3. blood pressure

slightly high

130 - 139 85 - 89 Consult your

doctor

4. blood pressure too

high

140 - 159 90 - 99 Seek medical

advice

5. blood pressure far

too high

160 - 179 100 - 109 Seek medical

advice

6. blood pressure

dangerously high

≥180 ≥110 Urgently seek

medical advice!

5BP W100 EN

3. Using the Device for the First Time

Activating the fitted batteries

Pull out the protective strip from the battery compartment 3.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 5. To

confirm and then set the month, press the time button 6.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts to

flash. Now you can enter the new values as described above.

4. Taking a Blood Pressure Measurement

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the measurement.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

the feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in the

pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 to 21.5 cm (5.25 - 8.5 inches).

7. Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

8. Press the ON/OFF button 1to start the measurement.

9. The cuff will now pump up automatically. Relax, do not move and

do not tense your arm muscles until the measurement result is

displayed. Breathe normally and do not talk.

10.When the correct pressure is reached, the pumping stops and the

pressure falls gradually. If the required pressure was not reached,

the device will automatically pump some more air into the cuff.

11.During the measurement, the heart symbol AN flashes in the

display and a beep sounds every time a heartbeat is detected.

12.The result, comprising the systolic

and the diastolic

blood

pressure and the pulse rate

is displayed and a long beep is heard.

Note also the explanations on further display symbols in this booklet.

13.Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

You can stop the measurement at any time by pressing the

ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-

sure sensation).

5. Appearance of the Heart Arrhythmia Indicator for

early Detection

This symbol

indicates that certain pulse irregularities were detected

during the measurement. In this case, the result may deviate from your

normal blood pressure – repeat the measurement. In most cases, this is

no cause for concern. However, if the symbol appears on a regular basis

(e.g. several times a week with measurements taken daily) we advise you

to tell your doctor. Please show your doctor the following explanation:

6. Data Memory

At the end of each measurement, this device automatically stores the

result, including date and time.

Viewing the stored values

Press the M-button

briefly, when the device is switched off. The

display first shows «

and then a value, e.g. «

M 17

». This means

that there are 17 values in the memory. The device then switches to the

last stored result.

Pressing the M-button again displays the previous value. Pressing the

M-button repeatedly enables you to move from one stored value to

another.

Memory full

When the memory has stored 200 results, the memory is full.

From this point onwards, a new measured value is stored by

overwriting the oldest value.

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been switched

off beforehand) until «CL» appears and then release the button. To

permanently clear the memory, press the M-button while «CL» is

flashing. Individual values cannot be cleared.

Information for the doctor on frequent appearance of the

Arrhythmia indicator

This device is an oscillometric blood pressure monitor that also

analyses pulse frequency during measurement. The device is clin-

ically tested.

The arrhythmia symbol is displayed after the measurement, if pulse

irregularities occur during measurement. If the symbol appears

more frequently (e.g. several times per week on measurements

performed daily) we recommend the patient to seek medical

advice.

This device does not replace a cardiac examination, but serves to

detect pulse irregularities at an early stage.

7BP W100 EN

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1until «M» AL is flashing. Confirm to delete the reading by

pressing the M-button 5.

7. Setting the Alarm Function

This device allows you to set 2 alarm times at which an alarm signal

will then be triggered. This can be a useful aid, for instance as a

reminder to take medication.

1. To set an alarm time, press the time button 6(the device must

have been switched off beforehand) and immediately afterwards

the M-button 5and hold both down until the bell symbol AK

appears in the bottom left of the display. Then release both

buttons. The flashing «1» in the display indicates that the first

alarm time can now be set.

2. Press the time button to set the hours – the hour display flashes

and pressing the M-button allows you to set the alarm hour. To

confirm, press the time button.

3. The minute display will now flash. The minutes can be set using

the M-button. To confirm, press the time button again.

4. The bell symbol will now flash. Use the M-button to select whether

the alarm time is to be active (bell) or inactive (crossed-out bell).

To confirm, press the time button.



To set a second alarm time, proceed as above but if the «

» flashes,

press the M-button to select «

» and confirm with the time button.



An active alarm time is indicated by the bell symbol in the display.



The alarm will sound at the set time every day.



To switch-off the alarm when it is sounding, press the ON/OFF

button 1.



To permanently switch off the alarm, proceed as above and select the

crossed-out bell symbol. This will then disappear from the display.



The alarm times must be re-entered each time the batteries are

replaced.

8. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol AO

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AO will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 3by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in «Section 3.».



The memory retains all values although date and time (and

possibly also set alarm times) must be reset – the year number

therefore flashes automatically after the batteries are replaced.

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

9. Error Messages

If an error occurs during the measurement, the measurement is inter-

rupted and an error message, e.g. «ERR 3», is displayed.

Error Description Potential cause and remedy

ERR 1

»Signaltoo

weak

The pulse signals on the cuff are too weak.

Re-position the cuff and repeat the

measurement.*

ERR 2

» Error signal During the measurement, error signals were

detected by the cuff, caused for instance by

movement or muscle tension. Repeat the

measurement, keeping your arm still.

ERR 3

» No pressure

in the cuff

An adequate pressure cannot be generated

in the cuff. A leak may have occurred. Check

that the cuff is correctly connected and is not

too loose. Replace the batteries if neces-

sary. Repeat the measurement.

ERR 5

» Abnormal

result

The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for performing reliable

measurements and then repeat the

measurement.*

Andere Handbücher für BP W100

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife A7 Touch BT Bedienungsanleitung

Microlife

Microlife BP AG1-20 Bedienungsanleitung

Microlife

Microlife aponorm Basis Bedienungsanleitung

Microlife

Microlife MAM EASY Bedienungsanleitung

Microlife

Microlife BP B1 Classic Bedienungsanleitung

Microlife

Microlife BP A3 PLUS Bedienungsanleitung

Microlife

Microlife BP 3BTO-A Bedienungsanleitung

Microlife

Microlife BP A90 Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife BP AG1-20 Bedienungsanleitung

Microlife

Microlife Aponorm Basis Control Bedienungsanleitung

Microlife

Microlife aponorm Mobil Soft Control Bedienungsanleitung

Microlife

Microlife BP A6 PC Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP A3 PLUS Bedienungsanleitung

Microlife

Microlife BP A80 Bedienungsanleitung

Microlife

Microlife #BP3AA1-2 Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP W2 Slim Bedienungsanleitung

Microlife

Microlife WatchBP Home A Bedienungsanleitung

Microlife

Microlife CARDIO+ Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife BP B3 AFIB Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung