Microlife BP W90 Bedienungsanleitung

Microlife BP W90

IB BP W90 V17 4421

Revision Date: 2021-10-19

P. Lukšio g. 32

08222 Vilnius / Lithuania

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

www.microlife.com

Microlife UAB

EN 1

FR 12

ES 24

PT 36

DE 48

NL 60

RU 72

PL 86

HU 98

BG 110

RO 124

CZ 136

SK 148

TR 160

GR 172

AR 186

FA 196

ØĮęĸŤşº Ţĳº

:

ﺪﺮﺧ ﺎﻧ

ŞĴŠĴęşº ŢŗÄ

ﺎﺮﺳ ﺎﻤﺷ

´ºĮĸşº ĦųÄďĘ

ﺪﺮﺧ ﺦﺎﺗ

ĺęĨŤşº Įğďęşº

ﺺﺼﺨﺘﻣ ﺪﻨﺷﺮﻓ

Guarantee Card BP W90

Name of Purchaser / Nom de l'acheteur / Nombre del comprador / Nome do comprador

/ Name des Käufers / Naam koper / Ф.И.О. покупателя /

Imię i nazwisko nabywcy /

Vásárló neve

/ Име на купувача /

Numele cumpărătorului

Jméno kupujícího

Meno zákazníka

/ Alıcının Adı/ Ονοματεπώνυμο αγοραστή //

Serial Number / Numéro de série / Número de serie / Número de série / Serien-Nr. /

Serienummer / Серийный номер /

Numer seryjny

Sorozatszám

Сериен номер /

Număr de serie

Výrobní číslo

Výrobné číslo

/ Seri Numarası/ Αριθμός σειράς /

Date of Purchase / Date d'achat / Fecha de compra / Data da compra / Kaufdatum/

Datum van aankoop / Дата покупки /

Data zakupu

Vásárlás dátuma

/ Дата на

закупуване /

Data cumpărării

Datum nákupu

Dátum kúpy

/ Satın Alma Tarihi /

Ημερομηνία αγοράς //

Specialist Dealer / Revendeur / Vendedor especializado / Revendedor autorizado /

Fachhändler / Specialist Dealer / Специализированный дилер /

Przedstawiciel

Forgalmazó

/ Специалист дистрибутор /

Distribuitor de specialitate

Specializovaný dealer

Špecializovaný predajca

/ Uzman Satıcı/ Εξειδικευμένος

αντιπρόσωπος //

Microlife BP W90

1BP W90 EN

Display

Read the instructions carefully before using this device.

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

Dear Customer,

Your new

Microlife

blood pressure monitor is a reliable medical device

for taking measurements on the wrist. It is simple to use, accurate and

comes highly recommended for blood pressure monitoring in your

home. This device was developed in collaboration with physicians and

clinical tests prove its measurement accuracy to be very high.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our products.

Stay healthy – Microlife AG!

* This device uses the same measuring technology as the highly

decorated «BP 3BZ1-3» model tested according to the British and

Irish Hypertension Society (BIHS) protocol.

Microlife BP W90 EN

1ON/OFF button

2Display

3Battery Compartment

4Cuff

5M-button (memory)

6Time Button

7Systolic Value

8Diastolic Value

9Pulse Rate

AT Date/Time

AK Alarm Time

AL Stored Value

AM Irregular Heartbeat (IHB) Symbol

AN Pulse

AO Battery Display

AP User 1

AQ User 2

Table of Contents

1. Important Facts about Blood Pressure and Self-Measure-

ment

• How do I evaluate my blood pressure?

2. Using the Device for the First Time

• Activating the fitted batteries

• Setting the date and time

3. Taking a Blood Pressure Measurement

4. Appearance of the Irregular Heartbeat (IHB) Symbol

5. User Selection

• Alternating between 2 users or the guest mode

6. Data Memory

• Viewing the stored values

• Memory full

• Clearing all values of an individual user

• How not to store a reading

7. Setting the Alarm Function

8. Battery Indicator and Battery change

• Low battery

• Flat battery – replacement

• Which batteries and which procedure?

• Using rechargeable batteries

9. Error Messages

10. Safety, Care, Accuracy Test and Disposal

• Safety and protection

•Devicecare

• Cleaning the cuff

• Accuracy test

•Disposal

11. Guarantee

12. Technical Specifications

Guarantee Card (see Back Cover)

Type BF applied part

Keep dry

3BP W90 EN

1. Important Facts about Blood Pressure and Self-

Measurement

Blood pressure is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the systolic

(upper) value and the diastolic (lower) value, are always

measured.

The device indicates thepulse rate (the number of times the heart

beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell him/her if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

A number of factors can affect the accuracy of measure-

ments taken on the wrist. In some cases, the result may differ

from the measurement taken on the upper arm. We therefore

advise you to compare these values with those produced by the

upper arm measurement and discuss them with your doctor.

Enter your readings in the enclosed blood pressure diary. This

will give your doctor a quick overview.

There are many causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate. Besides medication, relaxation

techniques, weight loss and exercise can also lower your blood

pressure.

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two measure-

ments per day, one in the morning and one in the evening.

It is quite normal for two measurements taken in quick succession

to produce significantly different results.

Deviations betweenmeasurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide a much clearer picture than just

one single measurement.

Leave a small break of at least 15 seconds between two

measurements.

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

If you suffer from a cardiac arrhythmia consult with your doctor

before using the device. See also chapter «Appearance of the

Irregular Heartbeat (IHB) Symbol» of this user manual.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

How do I evaluate my blood pressure?

The higher value is the one that determines the evaluation. Example:

a readout value between 150/85 or 120/98 mmHg indicates «blood

pressure too high».

2. Using the Device for the First Time

Activating the fitted batteries

Pull out the protective strip from the battery compartment 3.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 5. To

confirm and then set the month, press the time button 6.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts to

flash. Now you can enter the new values as described above.

3. Taking a Blood Pressure Measurement

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the measurement.

Table for classifying blood pressure values in adults in accordance

with the World Health Organisation (WHO) in 2003. Data in mmHg.

Range Systolic Diastolic

Recommenda-

tion

1. blood pressure

normal

< 120 < 80 Self-check

2. blood pressure

normal

120 - 129 80 - 84 Self-check

3. blood pressure

slightly high

130 - 139 85 - 89 Consult your

doctor

4. blood pressure

too high

140 - 159 90 - 99 Seek medical

advice

5. bloodpressurefar

too high

160 - 179 100 - 109 Seek medical

advice

6. blood pressure

dangerously high ≥180 ≥110 Urgently seek

medical advice!

5BP W90 EN

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

the feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in the

pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 to 21.5 cm (5.25 - 8.5 inches).

7. Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

8. Press the ON/OFF button 1to start the measurement.

9. The cuff will now pump up automatically. Relax, do not move and

do not tense your arm muscles until the measurement result is

displayed. Breathe normally and do not talk.

10.When the correct pressure is reached, the pumping stops and the

pressure falls gradually. If the required pressure was not reached,

the device will automatically pump some more air into the cuff.

11.During the measurement, the heart symbol AN flashes in the

display and a beep sounds every time a heartbeat is detected.

12.The result, comprising the systolic 7and the diastolic 8blood

pressure and the pulse rate 9is displayed and a long beep is

heard. Note also the explanations on further display symbols in

this booklet.

13.Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

You can stop the measurement at any time by pressing the

ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-

sure sensation).

4. Appearance of the Irregular Heartbeat (IHB) Symbol

This symbol AM indicates that an irregular heartbeat was detected. In

this case, the measuredblood pressure may deviate from your actual

blood pressure values. It is recommended to repeat the measure-

ment.

Information for the doctor in case of repeated appearance of

the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and

indicates when the heart rate is irregular.

5. User Selection

This blood pressure monitor allows you to store the results for 2 indi-

vidual users. In addition, there is a guest mode, in which the results

are not stored.

Alternating between 2 users or the guest mode

1. While the unit is switched off keep the time button 6pressed for

3 seconds until the user symbol AP or AQ starts to flash.

2. Press the M-button 5to change between user 1, user 2 and the

guest mode.

3. Confirm the selection by pressing the start button 1.

6. Data Memory

At the end of each measurement, this device automatically stores the

result, including date and time.

Viewing the stored values

Press the M-button 5briefly, when the device is switched off. The

display first shows «M» AL and then a value, e.g. «M 17». This

means that there are 17 values in the memory. The device then

switches to the last stored result.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

The user symbol AP or AQ indicates which user's memory is being

displayed. To change the user, please follow the instructions above.

In the guest mode no memories are stored or displayed.

Memory full



Pay attention that the maximum memory capacity of 99 memo-

ries per user is not exceeded.

When the 99 memory is full, the

oldest value is automatically overwritten with the 100th

value.

Values should be evaluated by a doctor before the

memory capacity is reached – otherwise data will be lost.

Clearing all values of an individual user

The following procedure applies for the selected user (AP or AQ).

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been switched

off beforehand) until «CL» appears and then release the button. To

permanently clear the memory, press the M-button while «CL» is

flashing. Individual values cannot be cleared.

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1until «M» AL is flashing. Confirm to delete the reading by

pressing the M-button 5.

7BP W90 EN

7. Setting the Alarm Function

This device allows you to set 2 alarm times at which an alarm signal

will then be triggered. This can be a useful aid, for instance as a

reminder to take medication.

1. To set an alarm time, press the time button 6(the device must

have been switched off beforehand) and immediately afterwards

the M-button 5and hold both down until the bell symbol AK

appears in the top left of the display. Then release both buttons.

The flashing «1» in the display indicates that the first alarm time

can now be set.

2. Press the time button to set the hours – the hour display flashes

and pressing the M-button allows you to set the alarm hour. To

confirm, press the time button.

3. The minute display will now flash. The minutes can be set using

the M-button. To confirm, press the time button again.

4. The bell symbol will now flash. Use the M-button to select whether

the alarm time is to be active (bell) or inactive (crossed-out bell).

To confirm, press the time button.



To set a second alarm time, proceed as above but if the «

» flashes,

press the M-button to select «

» and confirm with the time button.



An active alarm time is indicated by the bell symbol in the display.



The alarm will sound at the set time every day.



To switch-off the alarm when it is sounding, press the ON/OFF

button 1.



To permanently switch off the alarm, proceed as above and select the

crossed-out bell symbol. This will then disappear from the display.



The alarm times must be re-entered each time the batteries are

replaced.

8. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol AO

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AO will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 3by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in «Section 2.».



The memory retains all values although date and time (and

possibly also set alarm times) must be reset – the year number

therefore flashes automatically after the batteries are replaced.

Which batteries and which procedure?

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

9. Error Messages

If an error occurs during the measurement, the measurement is inter-

rupted and an error message, e.g. «ERR 3», is displayed.

Error Description Potential cause and remedy

ERR 1

Signal too

weak

The pulse signals on the cuff are too weak.

Re-position the cuff and repeat the

measurement.*

ERR 2

Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle tension.

Repeat the measurement, keeping your

arm still.

ERR 3

Nopressure

in the cuff

An adequate pressure cannotbe generated

in the cuff. A leak may have occurred.

Check that the cuff is correctly connected

and is not too loose. Replace the batteries

if necessary. Repeat the measurement.

ERR 5

Abnormal

result

The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for performing reliable

measurements and then repeat the

measurement.*

Andere Handbücher für BP W90

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife WatchBP Office ABI Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife Kroger BP3NL1-1AKRO Bedienungsanleitung

Microlife

Microlife BP A7 Touch Bedienungsanleitung

Microlife

Microlife BP W3 Comfort Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife CARDIO+ Bedienungsanleitung

Microlife

Microlife BP A130 Bedienungsanleitung

Microlife

Microlife BP W1 Basic Bedienungsanleitung

Microlife

Microlife BP RM 100 Bedienungsanleitung

Microlife

Microlife MAM Easy BP A3 Easy Bedienungsanleitung

Microlife

Microlife BP3GQ1-3P Bedienungsanleitung

Microlife

Microlife BPB1 Classic Bedienungsanleitung

Microlife

Microlife BP 3BT0-A Bedienungsanleitung

Microlife

Microlife BP W100 Bedienungsanleitung

Microlife

Microlife Aponorm Basis Control Bedienungsanleitung

Microlife

Microlife BP A130 Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP RM 100 Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife WatchBP 03 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung