Microlife BP W1 Basic Bedienungsanleitung

Microlife BP W1 Basic

IB BP W1 Basic E-V10 3618

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

www.microlife.com

EN 1

RU 12

BG 24

RO 36

CZ 46

SK 56

SL 66

SR 76

HU 86

HR 96

Microlife BP W1 Basic

17 16 13 12

BP W1 BasicGuarantee Card

Name of Purchaser / Ф.И.О. покупателя / Име на купувача /

Numele cumpărătorului / Jméno kupujícího / Meno zákazníka / Ime

in priimek kupca / Ime i prezime kupca / Vásárló neve /

Ime i prezime kupca

Serial Number / Серийный номер / Сериен номер / Număr de

serie / Výrobní číslo / Výrobné číslo / Serijska števika / Serijski broj /

Sorozatszám / Serijski broj

Date of Purchase / Дата покупки / Дата на закупуване / Data

cumpărării / Datum nákupu / Dátum kúpy / Datum nakupa / Datum

kupovine / Vásárlás dátuma / Datum kupovine

Specialist Dealer / Специализированный дилер /

Специалист

дистрибутор / Distribuitor de spe-cialitate / Specializovaný dealer /

Špecializovaný predajca / Spezializirani trgovec / Ovlašćeni diler /

Forgalmazó / Ovlašteni prodavač

1BP W1 Basic EN

Display

Read the instructions carefully before using this device.

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

Dear Customer,

Your new

Microlife

blood pressure monitor is a reliable medical device

for taking measurements on the wrist. It is simple to use, accurate and

comes highly recommended for blood pressure monitoring in your

home. This device was developed in collaboration with physicians and

clinical tests prove its measurement accuracy to be very high.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our products.

Stay healthy – Microlife AG!

* This device uses the same measuring algorithm as the award

winning BP W100 model tested according to the British Hypertension

Society (BHS) protocol.

Microlife BP W1 Basic EN

1ON/OFF button

2Display

3Battery Compartment

4Cuff

5M-button (memory)

6Time Button

7Systolic Value

8Diastolic Value

9Pulse Rate

AT Date/Time

AK Traffic Light Indicator

AL Stored Value

AM Heart Arrhythmia Indicator

AN Pulse Indicator

AO Battery Display

AP Arm Movement Indicator

AQ Cuff Check Indicator

AR LED Positioning Indicator

Table of Contents

1. Important Facts about Blood Pressure and Self-Measure-

ment

• How do I evaluate my blood pressure?

2. Using the Device for the First Time

• Inserting the batteries

• Setting the date and time

3. Taking a Blood Pressure Measurement

4. Appearance of the Heart Arrhythmia Indicator for early

Detection

5. Traffic Light Indicator in the Display

6. Data Memory

• Viewing the stored values

• Memory full

• Clearing all values

• How not to store a reading

7. Battery Indicator and Battery change

• Low battery

• Flat battery – replacement

• Which batteries and which procedure?

• Using rechargeable batteries

8. Error Messages

9. Safety, Care, Accuracy Test and Disposal

• Safety and protection

•Devicecare

• Cleaning the cuff

• Accuracy test

•Disposal

10. Guarantee

11. Technical Specifications

Guarantee Card (see Back Cover)

Type BF applied part

Keep dry

3BP W1 Basic EN

1. Important Facts about Blood Pressure and Self-

Measurement

•

Blood pressure

is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the

systolic

(upper) value and the

diastolic

(lower) value, are always measured.

•The device indicates thepulse rate (the number of times the heart

beats in a minute).

•Permanently high blood pressure values can damage your

health and must be treated by your doctor!

•Always discuss your values with your doctor and tell him/her if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

•There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate. Besides medication, weight loss

and exercise can also lower your blood pressure.

•Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

•Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two readings

every time (in the morning and in the evening) and average the

measurements.

•It is quite normal for two measurements taken in quick succession

to produce significantly different results.

•Deviations betweenmeasurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these

situations are completely different.

•

Several measurements

provide much more reliable information

about your blood pressure than just one single measurement.

•Leave a small break of at least 15 seconds between two

measurements.

•If you suffer from an irregular heartbeat (arrhythmia, see

«Section 4.»), measurements taken with this device should be

evaluated with your doctor.

•The pulse display is not suitable for checking the frequency

of heart pacemakers!

•If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

A number of factors can affect the accuracy of measure-

ments taken on the wrist. In some cases, the result may

differ from the measurement taken on the upper arm. We

therefore advise you to compare these values with those

produced by the upper arm measurement and discuss them

with your doctor.

How do I evaluate my blood pressure?

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

2. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment

is at the top of the device. Insert the batteries

(

x 1.5 V, size

AAA

), thereby observing the indicated polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 5. To

confirm and then set the month, press the time button 6.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts to

flash. Now you can enter the new values as described above.

3. Taking a Blood Pressure Measurement

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the measurement.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

the feet flat on the floor and do not cross your legs.

Table for classifying home blood pressure values in adults in accordance

with the international Guidelines (ESH, ESC, JSH). Data in mmHg.

Range Systolic Diastolic Recommendation

1. blood pressure

normal < 120 < 74 Self-check

2. blood pressure

optimum 120 - 129 74 - 79 Self-check

3. blood pressure

elevated 130 - 134 80 - 84 Self-check

4. blood pressure too

high 135 - 159 85 - 99 Seek medical

advice

5. blood pressure

dangerously high ≥160 ≥100 Urgently seek

medical advice!

5BP W1 Basic EN

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in the

pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 - 21.5 cm (5.25 - 8.5 inches).

7. Press the ON/OFF button 1to start the measurement.

8. The LED Positioning Indicator AR is activated. Support your arm

in a relaxed position with the device at the same height as your

heart, move your arm until the LED light is at its brightest and

appears to be in the center of the indicator.

9. After 5 seconds, the cuff will pump up automatically. Relax, do not

move and do not tense your arm muscles until the measurement

result is displayed. Breathe normally and do not talk.

10.When the correct pressure is reached, the pumping stops and the

pressure falls gradually. If the required pressure was not reached,

the device will automatically pump some more air into the cuff.

11.During the measurement, the pulse indicator

flashes in the display.

12.The result, comprising the systolic 7and the diastolic 8blood

pressure and the pulse rate 9is displayed. Note also the expla-

nations on further display symbols in this booklet.

13.Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

You can stop the measurement at any time by pressing the

ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-

sure sensation).

4. Appearance of the Heart Arrhythmia Indicator for

early Detection

This symbol

indicates that certain pulse irregularities were detected

during the measurement. In this case, the result may deviate from your

normal blood pressure – repeat the measurement. In most cases, this is

no cause for concern. However, if the symbol appears on a regular basis

(e.g. several times a week with measurements taken daily) we advise you

to tell your doctor. Please show your doctor the following explanation:

5. Traffic Light Indicator in the Display

The bars on the left-hand edge of the display AK show you the range

within which the indicated blood pressure value lies. Depending on

the height of the bar, the readout value is either within the optimum

(green), elevated (yellow), too high (orange) or dangerously high

(red) range. The classification corresponds to the 4 ranges in the

table as defined by the international guidelines (ESH, ESC, JSH), as

described in «Section 1.».

6. Data Memory

At the end of each measurement, this device automatically stores the

result, including date and time.

Viewing the stored values

Press the M-button

briefly, when the device is switched off. The

display first shows «

and then a value, e.g. «

M 17

». This means

that there are 17 values in the memory. The device then switches to the

last stored result.

Pressing the M-button again displays the previous value. Pressing the M-

button repeatedly enables you to move from one stored value to another.

Memory full



Pay attention that the maximum memory capacity of 60 memo-

ries is not exceeded.

When the 60 memory is full, the oldest

value is automatically overwritten with the 61st value.

Values should be evaluated by a doctor before the memory

capacity is reached – otherwise data will be lost.

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been switched

off beforehand) until «CL» appears and then release the button. To

permanently clear the memory, press the M-button while «CL» is

flashing. Individual values cannot be cleared.

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1until «M» AL is flashing. Confirm to delete the reading by

pressing the M-button 5.

Information for the doctor on frequent appearance of the

Arrhythmia indicator

This device is an oscillometric blood pressure monitor that also analyses

pulse frequency during measurement. The device is clinically tested.

The arrhythmia symbol is displayed after the measurement, if pulse

irregularities occur during measurement. If the symbol appears more

frequently (e.g. several times per week on measurements performed

daily) we recommend the patient to seek medical advice.

This device does not replace a cardiac examination, but serves to

detect pulse irregularities at an early stage.

7BP W1 Basic EN

7. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol AO

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AO will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 3by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in «Section 2.».

The memory retains all values although date and time must be

reset – the year number therefore flashes automatically after

the batteries are replaced.

Which batteries and which procedure?

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

8. Error Messages

If an error occurs during the measurement, the measurement is inter-

rupted and an error message, e.g. «ERR 3», is displayed.

Error Description Potential cause and remedy

ERR 1

»Signaltoo

weak

The pulse signals on the cuff are too weak. Re-

position the cuff and repeat the measurement.*

ERR 2

Error signal During the measurement, error signals were

detected by the cuff, caused for instance by

movement or muscle tension. Repeat the

measurement, keeping your arm still.

* Please immediately consult your doctor, if this or any other problem

occurs repeatedly.

If you think the results are unusual, please read through the

information in «Section 1.» carefully.

9. Safety, Care, Accuracy Test and Disposal

Safety and protection

•Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device and

keep for future reference.

•This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

•This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

•Protect it from:

- water and moisture

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

•The cuffs are sensitive and must be handled with care.

•Only pump up the cuff once fitted.

•Do not use this device close to strong electromagnetic fields such

as mobile telephones or radio installations. Keep a minimum

distance of 3.3 m from such devices when using this device.

ERR 3

No pres-

sure in the

cuff

An adequate pressure cannot be generated

in the cuff. A leak may have occurred. Check

that the cuff is correctly connected and is not

too loose. Replace the batteries if necessary.

Repeat the measurement.

ERR 5

»Abnormal

result

The measuring signals are inaccurate and no

result can therefore be displayed. Read through

the checklist for performing reliable measure-

ments and then repeat the measurement.*

» Pulse or cuff

pressuretoo

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

» Pulse too

low The pulse is too low (less than 40 beats per

minute). Repeat the measurement.*

Error Description Potential cause and remedy

Andere Handbücher für BP W1 Basic

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP3GX1-5N Bedienungsanleitung

Microlife

Microlife BP W3 Comfort Bedienungsanleitung

Microlife

Microlife BP AG1-20 Bedienungsanleitung

Microlife

Microlife BP 3AX1 Bedienungsanleitung

Microlife

Microlife BP A3 PLUS Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP A150 AFIB Bedienungsanleitung

Microlife

Microlife BP W90 Bedienungsanleitung

Microlife

Microlife BP W70 Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP3MA1-3 Bedienungsanleitung

Microlife

Microlife Kroger BP3NL1-1AKRO Bedienungsanleitung

Microlife

Microlife BP AG1-20 Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP A80 Bedienungsanleitung

Microlife

Microlife BP A100 Bedienungsanleitung

Microlife

Microlife BP AG1-40 Bedienungsanleitung

Microlife

Microlife Aponorm Basis Control Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP W100-MAM Wrist Bedienungsanleitung

Microlife

Microlife BP A3L PC Bedienungsanleitung

Microlife

Microlife BP B2 Basic Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung