Microlight MX86 Bedienungsanleitung
MX86 QR Code Scanner User Manual
July 5, 2017
Beijing Microlight Internet Technology Co., Ltd.
Disclaimer
Before using the product, please read carefully all the contents of
this MX86 Product User Manual (hereinafter referred to as “Manual”)
to ensure the safe and effective use of the product.
Do not disassemble the product or tear off the seal on the product.
Otherwise, Beijing Microlight Internet Technology Co. Ltd. will not be
responsible for the warranty or replacement of the product.
The pictures in this manual are for reference only. If there is a
discrepancy between an individual picture and the actual product, the
actual product shall prevail. For the upgrade of this product, Beijing
Microlight Internet Technology Co., Ltd. reserves the right to modify
the document at any time without notice.
The use of this product is at your own risk. To the fullest extent
permitted by applicable law, damages and risks resulting from the use or
inability to use the software, including but not limited to direct or
indirect personal damages, loss of commercial profits, trade interruption,
loss of business information or any other economic loss, Beijing
Microlight Internet Technology Co. Ltd. does not assume any
responsibility.
All rights of interpretation and modification of this manual belong
to Beijing Microlight Internet Technology Co, Ltd.
www.vguang.cn
2
Table of Contents
Disclaimer.................................................................................................................................. 2
Copyright Notice........................................................................................................................6
Preface....................................................................................................................................... 7
Product Introduction............................................................................................................. 7
Product Features................................................................................................................... 7
Strong reading ability............................................................................................... 7
Paper code reading ability........................................................................................ 7
High speed reading................................................................................................... 8
Easy to use................................................................................................................ 8
Precautions............................................................................................................................8
Chapter ⅠProduct Parameters............................................................................................... 9
Appearance parameters........................................................................................................9
Reading parameters............................................................................................................ 10
Electrical parameters...........................................................................................................11
Interface parameters...........................................................................................................12
USB interface.......................................................................................................... 12
RS232 interface.......................................................................................................13
www.vguang.cn
3
RS485interface........................................................................................................13
TTL interface........................................................................................................... 14
Wiegand Interface.................................................................................................. 14
WIFI Interface......................................................................................................... 14
Ethernet Interface...................................................................................................15
Chapter ⅡWiring instructions...............................................................................................16
Pin definitions......................................................................................................................16
USB/WIFI/Ethernet Wiring.................................................................................................. 18
RS232 WiringRS232 connection.......................................................................................... 19
Wiegand/TTL/RS485/WIFI Wiring....................................................................................... 21
Chapter III Product Configuration.......................................................................................... 22
Run Configuration Tool....................................................................................................... 22
Configure Corresponding Functions....................................................................................22
Chapter ⅣCommon Faults and Troubleshooting Methods...............................................27
Contact Information................................................................................................................28
Version Information................................................................................................................29
www.vguang.cn
4
Copyright Notice
All information contained in this manual is protected by copyright, and Beijing
Microlight Internet Technology Co., Ltd. reserves all rights. Without the written
permission of our company, any unit or individual shall bear legal liability for
taking any form of excerpt, coping any or all of the contents of this document or
selling or using the product bundled with other products in any way or for any
reason.
www.vguang.cn
6
Preface
Product Introduction
Thanks for using the MX86 series of scanners provided by Microlight Internet Ltd. This product can
realize QR code identification and RF card reading. Please read the user manual carefully before use, you will
appreciate its perfect function and simple operation method.
This product is mainly used for QR code identification and RF card reading. The company does not
assume responsibility for the property loss or personal injury caused by the user’s abnormal operation. Please
design and develop the corresponding product according to the technical specifications and reference in the
manual. Also please pay attention to the general safety matters that should be taken into account when using
mobile products.
Before the statement, the company has the right to modify the contents of this manual according to the
needs of technological development.
Product Features
S t r o n g r e a d i n g a b i l i t y
It can recognize the QR code and one-dimensional code on the screen of the mobile phone, support the
enhanced engine mode, and can scan and read the code when the screen of the mobile phone is dark.
P a p e r c o d e r e a d i n g a b i l i t y
The main QR codes and various one-dimensional codes printed on the paper can also be read.
www.vguang.cn
7
H i g h s p e e d r e a d i n g
Different mobile phone LCD screens generally have different contrast, color, and degree of reflection,
which can be read as long as the code system is within the reading window.
E a s y t o u s e
Scanners can be configured using configuration tools to achieve optimal operation.
Precautions
Dismantling and modification: Please do not disassemble or modify the hardware of the product. If the
equipment is damaged thereof, the company will not be responsible for the warranty.
Abnormal condition: Keep away from fire. If you find unusual odor, overheat or smoke, please immediately
turn off the power switch and unplug the plug from the AC outlet, and contact the dealer where you
purchased the product or our customer service center.
Drop damage: If the product is damaged due to falling on the ground, please immediately turn off the power
and contact the dealer where you purchased the product or our customer service center.
Placement location: Please do not place the product in an unstable or uneven place, so as to avoid the device
falling down and causing damage; please do not put the device in a place with large amount of moisture or
dust, so as to avoid causing electric leakage or fire.
Please keep the illuminating glass lens clean. When wiping, use soft cotton or lens paper. Do not wipe the
window glass with detergent or dissolved liquid.
Do not touch the window glass with abrasive substances, so as to avoid wearing the window glass and
affecting the reading effect.
www.vguang.cn
8
Chapter ⅠProduct Parameters
Apparent parameters
Figure 1-1 Vertical Vie
www.vguang.cn
9
Figure 1-2 Side View
Reading Parameters
Reading Parameters of MX86 series QR
code
QR code: QR Code, Data Matrix, PDF417, etc.
Identification code
One-dimensional code：EAN-8,EAN-13,ISBN-10,ISBN-13,
UPC-E,UPCA,CODE39,CODE93.CODE128 etc;
Decoding support
All prints such as mobile phones, screens, and paper
Reading depth of field
0mm-100mm
Reading accuracy
≥5mil
Reading rate
15 /s
Reading speed
100ms each time (average), supports continuous reading
Reading direction
360 degrees
Table 1-1 QR code reading parameters
www.vguang.cn
10
Reading parameters of MX86 series NFC
Identification card
type
Mifare_UltraLight、Mifare_One(S50)、
Mifare_One(S70)、Mifare_Pro(X)、Mifare_DESFire
RF operating
frequency
13.56MHZ
Effective operating
distance
<5cm
Reading rate
15 /s
Table 1-2 NFC reading parameters
Note: The RF antenna is related to the environment. If there is metal around the product, the quality of
swiping card will be affected.
Electrical parameters
MX86 Series Device Parameters
USB (HID Analog Keyboard, Custom HID), RS485, RS232,
Support interface
TTL,WIFI, Wiegand, Ethernet
LED diffuse illumination: white light (adjustable brightness), red
Light source
light green light status light (configurable on), blue indicator light
Image sensor
300,000 pixel CMOS sensor
Maximum
resolution
640*480
Indicator
Buzzer, LED indicator
Operating
temperature
-20~70 ℃
Storage
temperature
-40 to 80 ℃
Table 1-3 Device parameters
www.vguang.cn
11
Inhaltsverzeichnis
