Midea Inverter Split-type Room Air Conditioner Bedienungsanleitung

Please read the operating instructions and safety precautions carefully

and thoroughly before installing and operating your room air conditioner.

OWNER S MANUAL

Inverter Split-type Room Air Conditioner

SOCIABLE REMARK

The follow contents apply only the countries of Europe.

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection

of such waste separately for special treatment is necessary.

It is prohibited to dispose of this appliance in domestic household waste.

For disposal, there are several possibilities:

A) The municipality has established collection systems, where electronic waste can

be disposed of at least free of charge to the user.

B) When buying a new product, the retailer will take back the old product at least

free of charge.

C) The manufacture will take back the old appliance for disposal at least free of

charge to the user.

D) As old products contain valuable resources, they can be sold to scrap metal

dealers.

Wild disposal of waste in forests and landscapes endangers your health when

hazardous substances leak into the ground-water and find their way into the food

chain.

CONTENTS

SAFETY PRECAUTIONS .......................................................................................

PARTS NAMES .....................................................................................................

OPERATING TEMPERATURE ..............................................................................

MANUAL OPERATION .........................................................................................

ADJUSTING AIR FLOW DIRECTION.....................................................................

HOW THE AIR CONDITIONER WORKS................................................................

OPTIMAL OPERATION ..........................................................................................

MAINTENANCE.......................................................................................................

OPERATION TIPS .................................................................................................

TROUBLESHOOTING TIPS...................................................................................

Inside you will find many helpful hints on how to use and maintain your

air conditioner properly. Just a little preventative care on your part can

save you a great deal of time and money over the life of your air conditioner.

You'll find many answers to common problems in the chart of troubleshooting

tips. If you review the chart of Troubleshooting Tips first, you may not need

to call for service.

Contact an authorised service technician for repair or maintenance of this unit.

Contact the installer for installation of this unit.

The air conditioner is not intended for use by young children or invalids

without supervision.

Young children should be supervised to ensure that they do not play with the

air conditioner.

If the power cord is to be replaced, replacement work shall be performed by

authorised personnel only.

Installation work must be performed in accordance with the national wiring

standards by authorised personnel only.

!CAUTION

Read This Manual

To prevent injury to the user or other people and property damage, the following

instructions must be followed.

Incorrect operation due to ignoring of instructions may cause harm or damage. The

seriousness is classified by the following indications.

SAFETY PRECAUTIONS

This symbol indicates the possibility of death or serious injury.

Meanings of symbols used in this manual are as shown below.

WARNING

Always do this.

Never do this.

CAUTION

This symbol indicates the possibility of injury or damage to property.

Connect with the power

properly.

Do not modify power cord

length or share the outlet

with other appliances

Always ensure effective

earthing.

Disconnect the power if

strange sounds, smell, or

smoke comes from it.

Use the correctly rated

breaker or fuse.

Ventilate room before operating air

conditioner if there is a gas leakage from

another appliance.

Otherwise, it may cause electric

shock or fire due to heat

generation.

excess

It may cause electric shock or

fire due to heat generation.

No earthing may cause electric

shock.

It may cause fire and electric

shock.

There is risk of fire or electric

shock.

It may cause explosion, fire and, burns.

It may cause electric shock or fire

due to heat generation.

It may cause electric shock.

It may cause failure of machine

or electric shock.

It may cause fire and electric

shock.

It may cause fire and electric

shock.

It may cause electric shock or fire.

This could damage your health.

No installation may cause fire

and electric shock.

It may cause electric shock.

It may cause an explosion or fire.

It may cause failure and electric shock.

Do not operate or stop the

unit by inserting or pulling

out the power plug.

Do not operate with wet

hands or in damp

environment.

Do not allow water to run

into electric parts.

Do not use the socket if it is

loose or damaged.

Do not use the power cord

close to heating appliances.

Do not damage or use an

unspecified power cord.

Do not direct airflow at

room occupants only.

Always install circuit

breaker and a dedicated

power circuit.

Do not open the unit

during operation.

Do not use the power cord near

flammable gas or combustibles, such

as gasoline, benzene, thinner, etc.

Do not disassemble or modify unit.

WARNING

CAUTION

When the air filter is to be

removed, do not touch the

metal parts of the unit.

It may cause an injury.

Do not clean unit when

power is on as it may cause

fire and electric shock, it may

cause an injury.

Operation with windows

opened may cause wetting

of indoor and soaking of

household furniture.

When the unit is to be

cleaned, switch off, and turn

off the circuit breaker.

Stop operation and close

the window in storm or

hurricane.

Use caution when unpacking and

installing. Sharp edges could cause injury.

Turn the main power off

when cleaning or maintain-

ing the product.

There is risk of electric shock.

This could injure the pet or

plant.

Failue to do so may cause

electric shock and damage.

Do not put a pet or house

plant where it will be

exposed to direct air flow.

Hold the plug by the head

of the power plug when

taking it out.

Ventilate the room well when

used together with a stove,

etc.

An oxygen shortage may occur.

Do not use this air conditioner to

preserve precision devices, food,

pets, plants, and art objects.

It may cause deterioration of

quality, etc.

It may cause failure of product

or fire.

Do not use for special

purposes.

Turn off the main power

switch when not sing the

unit for a long time.

If water enters the unit, turn the unit off at the power

outlet and switch off the circuit breaker. Isolate

supply by taking the power-plug out and contact a

qualified service technician.

It may cause failure of

appliance or accident.

Appearance may be

deteriorated due to change

of product color or

scratching of its surface.

Do not place obstacles

around air-inlets or inside

of air-outlet.

Do not use strong detergent

such as wax or thinner. Use

a soft cloth for cleaning.

If bracket is damaged, there

is concern of damage due to

falling of unit.

There is danger of fire or

electric shock.

Ensure that the installation bracket of

the outdoor appliance is not damaged

due to prolonged exposure.

Do not place heavy object on the

power cord and take care so that

the cord is not compressed.

Operation without filters may

cause failure.

It contains contaminants and

could make you sick.

Always insert the filters

securely. Clean filter once

every two weeks.

Do not drink water drained

from air conditioner.

INDOOR UNIT

OUTDOOR UNIT

DISPLAY PANEL

Air outlet

Air inlet

TIMER RUN

DEF.

Air inlet

456

DISPLAY PANEL

INDOOR UNIT

Front panel frame

Front panel

Air filter

Horizontal air flow grille

Vertical air flow louver

Room temperature sensor

Display panel

Infrared signal receiver

Remote controller

Drain hose, refrigerant connecting pipe

Connective cable

Stop valve

OPERATION/RUN indicator:

TIMER indicator:

PRE-DEF./DEF. Indicator

AUTO indicator:

The indicator flashes once every second

after power is on and illuminates when the

air conditioner is in operation.

The indicator illuminates when TIMER is set ON.

This indicator flashes when the air conditioner

is in AUTO operation.

(For cooling& heating model only)

This indicator illuminates when the air conditioner

starts defrosting automatically or when the Anti-

cold air feature is activated in heating operation.

Infrared signal receptor

OPERATION TIMER

PRE-DEF

AUTO

Infrared signal receptor

NOTE:

The display panel on the indoor unit

would look like one of following:

Note:

All the pictures in this manual are for explanation

purpose only. They may be slightly different from

the air conditioner you purchased. The actual

shape shall prevail.

PARTS NAMES

AUTO

Manul operation can be used temporarily in case you can not find the remote controller or

its batteries are exhausted.

Manual

control button

AUTO/COOL

Manual

control button

OPERATING TEMPERATURE

MANUAL OPERATION

Open and lift the front panel up to an angle

until it remains fixed with a clicking sound.

Close the panel firmly to its original

position.

One press of the manual control button will

lead to the forced AUTO operation. If press

the button twice within five seconds, the unit

will operate under forced COOL operation.

This button is used for testing purposes

only. You had better not choose it.

To restore the remote controller operation,

use the remote controller directly.

CAUTION:

NOTE: The unit must be turned off before

operating the manual control button. If the

unit is operational, continue pressing the

manual control button until the unit is off.

Mode

Cooling operation

Heating operation

Drying operation

Temperature

1. If air conditioner is used outside of the above conditions, certain safety protection

features may come into operation and cause the unit to function abnormally.

2. Room relative humidity less than 80%. If the air conditioner operates in excess of this

figure, the surface of the air conditioner may attract condensation. Please sets the vertical

air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.

3. Optimum performance will be achieved within these operating temperature.

Room temperature

Outdoor temperature

>17 C

0C 50C

<30 C

-15 C 34 C

>10 C

0C 50C

CAUTION:

( -15 C 50 C:For the models with

low temperature cooling system)

ADJUSTING AIR FLOW DIRECTION

Lever

Adjust the air flow direction properly otherwise, it

might cause discomfort or cause uneven room

temperatures.

Adjust the horizontal louver using the remote

controller.

Adjust the vertical louver manually.

Perform this function while the unit is in operation.

Use the remote controller to adjust the air flow

direction. The horizontal louver can be moved at

a angle of 6 for each press or set to move up

and down automatically. Please refer to the

REMOTE CONTROLLER OPERATION MANUAL

for details.

To set the vertical air flow(Up--Down) direction

Adjust the vertical louver manually using the lever

on the left or right side of the vertical louver arm

(Depending on model). Take care not to catch

fingers on the fan, horizontal louver or to damage

vertical louvers. When the air conditioner is in

operational and the horizontal louver is in a specific

position, move the lever at left (or right, depending

on model) end of the air outlet to the desired position.

To set the horizontal air flow direction (left - right)

The DIRECTION/SWING button will be disabled when the

air conditioner is not in operation(including when the TIMER

is set).

Do not operate the air conditioner for long periods the

air flow direction set downward in cooling or dry mode.

Otherwise, may occur on the surface of the

horizontal louver causing moisture to drop on to the floor or

on furnishings.

Do not move the horizontal louver manually. Always use the

DIRECTION/SWINGbutton. If you move this louver

manually, it may malfunction during operation. If the louver

malfunctions, stop the air conditioner once and restart it.

When the air conditioner is started immediately after it was

stopped, the horizontal louver might not move for

approximately 10 seconds.

Open angle of the horizontal louver should not be set too

small, as COOLING or HEATING performance may be

impaired due to too restricted air flow area.

Do not operate unit with horizontal louver in closed position.

When the air conditioner is connected to power (initial

power), the horizontal louver may generate a sound for 10

seconds, this is a normal operation.

with

condensation

CAUTION

AUTOMATIC OPERATION

ECONOMIC(SLEEP) OPERATION

DRYING OPERATION

When you set the air conditioner in AUTO mode, it will

automatically select cooling, heating(cooling/heating

models only), or fan only operation depending on what

temperature you have selected and the room temperature.

The air conditioner will control room temperature

automatically round the temperature point set by you.

If the AUTO mode is uncomfortable, you can select

desired conditions manually.

When you push ECONO (SLEEP) button on remote

controller during cooling, heating(cooling only type without),

or AUTO operation , the air conditioner will automatically

increase (cooling) or decrease (heating) 1 per hour.

The set temperature will be steady 2 hours later. The fan

speed will be automatically controlled. This feature can

maintain the most comfortable temperature and save more

energy for you.

The fan speed will be automatically controlled under dry

operation.

During the dry operation, if the room temperature is lower

than 10 C, the compressor stops operation and restarts

until the room temperature is above 12 C.

To achieve optimal performance, please note the following:

Adjust the air flow direction correctly so that it is not directed on people.

Adjust the temperature to achieve the highest comfort level. Do not adjust the unit

to excessive temperature levels.

Close doors and windows on COOL or HEAT modes, or performance may be reduced.

Use TIMER ON button on the remote controller to select a time you want to start

your air conditioner.

Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner

may be reduced and the air conditioner may stop running.

Clean the air filter periodically, otherwise cooling or heating performance may be reduced.

Do not operate unit with horizontal louvre in closed position.

1 hour

Set

Temperature

Cooling

1 hour 1 hour

Set

Temperature

Heating

ECONOMIC (SLEEP) operation

HOW THE AIR CONDITIONER WORKS

OPTIMAL OPERATION

Cleaning the indoor unit and remote

controller

A clogged air filter reduces the cooling efficiency of this

unit. Please clean the filter once every 2 weeks.

1. Lift the indoor unit panel up to an angle until it stops

with a clicking sound.

2. Take hold of the handle of the air filter and lift it up

slightly to take it out from the filter holder, then

pull it downwards.

Cleaning the air filter

It is necessary to stop the air conditioner and dis-

connect the power supply before cleaning.

WARNING

Filter Handle

Use a dry cloth to wipe the indoor unit and

controller.

A cloth dampened with cold water may be used

the indoor unit if it is very dirty.

The front panel of the indoor unit can be removed

and cleaned with water. Then wipe it with a dry cloth.

remote

Do not use a chemically treated cloth or duster to

clean the unit.

Do not use benzine, thinner, polishing powder, or

similar solvents for cleaning. These may cause

the plastic surface to crack or deform.

CAUTIONS

3. Remove the AIR FILTER from the indoor unit.

Clean the AIR FILTER once two weeks.

Clean the AIR FILTER with a vacuum cleaner

or water, then dry it up in cool place.

MAINTENANCE

Inhaltsverzeichnis

Andere Midea Klimaanlage Handbücher

Midea

Midea MB-09N8D6-i Bedienungsanleitung

Midea

Midea MSC-09HRDN1-QD0(E) Bedienungsanleitung

Midea

Midea MFGA-55FN1RD0 Bedienungsanleitung

Midea

Midea MPM3-10CR-BB6 Bedienungsanleitung

Midea

Midea MDV-D252W/CS Bedienungsanleitung

Midea

Midea MTI-24FNXD0 MOU-24FN1-QD0 Bedienungsanleitung

Midea

Midea MP12SVWBA3RCM Bedienungsanleitung

Midea

Midea MS9A-09HRDN1-QC2 Bedienungsanleitung

Midea

Midea AC100-20ARB Bedienungsanleitung

Midea

Midea AC100-20AR Bedienungsanleitung

Midea

Midea MSR1-24HRDN1-QC2W Bedienungsanleitung

Midea

Midea DLCERAA12AAJ Bedienungsanleitung

Midea

Midea M2OE-14HFN1-Q Bedienungsanleitung

Midea

Midea PREMIER SERIES Bedienungsanleitung

Midea

Midea MWTF-24CM Bedienungsanleitung

Midea

Midea DLCSRAH12AAJ Bedienungsanleitung

Midea

Midea MSV1-09HRDN1 Bedienungsanleitung

Midea

Midea EWK+10CW5 Bedienungsanleitung

Midea

Midea M thermal A Mono Series Bedienungsanleitung

Midea

Midea MSV1I-09HRDN1 Betriebsanleitung

Midea

Midea MSG-05CR Bedienungsanleitung

Midea

Midea MWB10CW71 Bedienungsanleitung

Midea

Midea DLFSHB Bedienungsanleitung

Midea

Midea MW08MSWBA5RCM Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung