Midland NAUTICO 1 Bedienungsanleitung

Nautico1 (NT1)

Owner’s Guide

TABLE OF CONTENTS ………………………………………. 1

Introduction…………………………………………………….. 2

Important Notice, FCC Licensing…………………………... 3

LCD Display …………………………………………………….. 4

Controls …………………………………………………………. 5

Battery Installation ……………………………………………. 6

Installing the Belt Clip ………………………………………… 6

Charging the Optional Battery Pack ……………………….. 7

Operating Your Radio …………………………………………. 8-11

External Speaker/Microphone Jack ……………………… 11

Troubleshooting Guide ……………………………………… 12

Use and Care ………………………………………………….. 12

Specifications and Frequency Charts …………………….. 13-16

Warranty Information ………………………………………… 17

MIDLAND Family of Products ………………………………. 18

Accessories ……………………………………………………. 18

Welcome to the world of Midland electronics

Congratulations on your purchase of a high quality MIDLAND product. Your 2-

way radio represents the state-of-the-art in high-tech engineering. Designed for

VHF Marine Service operation, this compact package is big on performance. It is

a quality piece of electronic equipment, skillfully constructed with the finest

components. The circuitry is all solid-state and mounted on a rugged printed

circuit board. Your 2-way radio is designed to give you reliable and trouble-free

performance for years to come.

Features

- Marine Channels: 57 USA / 61 Canada / 57 International (grouped by area)

- eVOX

- Selectable CALL Tone

- Weather (WX) Band Receiver

- SCAN Function

- MONITOR Function

- Roger Beep Tone

- Key Pad Lock

- Power High / Power Low Settings

- Speaker / Microphone Jacks

- Battery Indicator

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device does not cause harmful interference, and

(2) this radio must accept any interference that may cause undesired operation.

To maintain compliance with FCC’s RF exposure guidelines, for body-worn

operation, this radio has been tested and meets the FCC RF exposure guidelines

when used with Midland Radio Corp. accessories supplied or designated for this

product. Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

The Nautico1 operates on VHF Marine Radio Service frequencies, in compliance

with Federal Communications Commission (FCC) requirements. Recreational

boaters are not currently required to have a Ship Radio License. The USCG

recommends that the boat’s registration number and state be used for the radio

call sign.

FCC License

A ship station license is not required for any vessel traveling in U.S. waters which

is less than 20 meters in length. However, any vessel required to carry an HF

SSB radiotelephone or marine satellite terminal is required to have a ship station

license. FCC license forms can be downloaded at www.fcc.gov/forms. You may

also obtain a form from the FCC by calling (888) 225-5322.

Exposure to Radio Frequency Energy

Your Midland radio is designed to comply with the following national and

international standards and guidelines regarding exposure of human being to

radio frequency electromagnetic energy:

- United States Federal Communications Commission, Code of Federal

Regulations: 47 CFR part 2 sub-part J

- American National Standards Institute (ANSI)/Institute of Electrical & Electronic

Engineers (IEEE) C95. 1-1992

- Institute of Electrical and Electronic Engineer (IEEE) C95. 1-1999 Edition

- National Council on Radiation Protection and Measurements (NCRP) of the

United States, Report 86, 1986

- International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998

To control your exposure and ensure compliance with the general population or

uncontrolled environment exposure limits, transmit no more than 50% of the

time. The radio generates measurable RF energy exposure only when

transmitting.

LCD DISPLAY

1. USA/CAN/INT CHANNEL ICONS

2. TRANSMIT (TX) ICON – Indicates radio is transmitting a

signal.

3. VOX – Indicates when eVOX mode is active.

4. CHANNEL NUMBER – Changes from 1~88a on VHF

Marine band (1~10 on WX band).

5. RECEIVE (RX) ICON – Indicates radio is receiving a

transmission.

6. KEY LOCK ICON – Indicates KEY LOCK mode is on.

7. LOW BATTERY ICON – Indicates battery level is low.

8. WX BAND ICON – Indicates when the radio is in Weather

Band mode

9. TRANSMIT POWER LEVEL (Hi / LO) ICON – Indicates TX

Power setting.

CONTROLS

10. POWER/VOLUME KNOB – Turn clockwise to turn the power on and

increase the volume level. Turn counter-clockwise to decrease the volume level

and turn the power off.

11. PTT Button – Press and hold to transmit voice communication. Press twice

quickly to send a call tone.

12. CH 16 Button – Press to switch immediately to emergency channel 16.

Press and hold to switch to Channel 9.

13. MIC – Built-in microphone.

14. SPEAKER – Built-in speaker.

15. ANTENNA.

16. EXTERNAL SPEAKER/MIC JACK.

17. MENU Button – Press to access MENU mode. Press and hold to go to WX

Band Receiver mode.

18. MONITOR/SCAN Button – Press to enter SCAN mode. Press and hold to

enter MONITOR mode.

19. UP/DOWN Button – Make adjustments in MENU mode.

BATTERY INSTALLATION

Your Nautico1 radio operates with either 4 AA alkaline batteries or an optional

NiMH battery pack. The belt clip should be removed (see below) to ease

installation or removal of the batteries.

To install the batteries:

1. With the back of the radio facing you, remove the belt clip (see diagram below)

for easy access, then remove the Battery Cover

by pressing down on the top center and sliding it down from the radio.

2. Insert 4 AA batteries observing the polarity as shown. Installing

the batteries incorrectly will prevent the radio from operating or

may damage the radio.

3. Return the battery cover by sliding it up on the radio. Replace the belt clip,

making sure it locks into place.

To install the BELT CLIP, slide the clip down into the slot on the back of the

radio until the BELT CLIP LATCH clicks. To remove the BELT CLIP, press the

LOCK TAB down, then gently pull the belt clip up toward the top of the radio.

RECHARGEABLE BATTERY & CHARGER OPTION

Your Nautico1 is equipped for using an optional rechargeable NiMH battery pack

(not included) which can be recharged using an AC or DC charger (not included).

Initial charge time is 24 hours with a charge time of 8-12 hours thereafter. For

maximum battery life, we recommend charging the Nautico1 when the low

battery indicator comes on. Remove the radio from the charger when the charge

time expires.

To Charge Using Optional AC or DC Charger:

1. Place the rechargeable Ni-MH battery pack into the radio

2. Connect the AC adapter into an AC wall outlet

3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if charging in

vehicle) into the charging jack on the side of the radio.

OPERATING YOUR RADIO

POWER ON/OFF AND VOLUME

Rotate the POWER/VOLUME knob clockwise to turn the radio on and

increase the volume level. Rotate the control counter-clockwise to reduce the

volume level and to turn the radio off. During Power On, the radio will beep 3

times with different tones, the LCD will display a "self-test" message for 1

second and the LCD display will indicate the last selected channel.

1. Only use Midland NiMH battery pack.

2. Do not attempt to charge alkaline batteries or any

batteries or battery packs other than the one indicated in

the manual. This may cause leakage and damage the

radio.

3. For long-term storage of the radio, turn the radio OFF

and remove the batteries from the radio.

TRANSMITTING AND RECEIVING

1. To transmit a call, hold the radio 2 to 3

inches from your mouth.

2. Press and hold the PTT button and speak in

a normal voice into the microphone. The TX

icon will appear continuously on the LCD

display while transmitting.

3. To receive a call, release the PTT button.

The RX icon will appear on the display when

your radio is receiving.

ABOUT RANGE

Your Nautico1 radio is designed to give you

maximum range under optimum conditions.

Optimum Conditions are:

•Over water

•Open rural areas without obstructions

•Flat areas where you can see the other person

To ensure you get maximum range:

•Be sure to use fresh or fully charged batteries – low batteries will cause low

power conditions

•Be sure the radio is set to high power

MONITOR

Pressing and holding the MONITOR button for 1 second will let you hear noise

so you can adjust the volume level of the radio when not receiving a signal. This

should be used to check activity on your current channel before transmitting.

Press and release the Monitor button for 1 second to get out of Monitor mode.

SCAN

Your Nautico1 can scan all channels for activity. To enter, quickly press the

SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan

each of the channels and stop on any active channel for 5 seconds before

resuming scan. When you press the PTT button to transmit on an active channel,

the scanning function will stop and remain on the active channel. To resume

scanning, quickly press the button.

INSTANT CHANNEL 16/9

Channel 16 (Distress Channel) is used for calling other stations or for distress

alerting. Channel 16 is automatically monitored during both dual watch and tri

watch. You must monitor Channel 16 while standing by. Channel 16 is only to be

used in emergency situations. You can also switch to Channel 9, the leisure-use

call channel, without changing your normal channel by pressing and holding the

CH16 Button for 1 second. Pressing the CH16 button again returns the radio to

the normal channel setting.

CALL TONE

Your Nautico1 can transmit a call tone for a fixed length of time. To send a call

tone, press the PTT button twice within ½ second. The TX icon will appear while

transmitting a call tone and a tone can be heard on the speaker for confirmation.

KEYPAD LOCK

To avoid accidentally changing the radio setting, press the MENU button 4 times

then press an up/down button to choose ON. The KEY LOCK icon will appear on

the display. PTT and CH 16 will still be active. To unlock the keypad, press the

MENU button once, then press the button to choose OF.

DISPLAY ILLUMINATION

During Power on, the display illumination will activate for approx. 7 seconds. The

display illumination can also be activated when the MENU button is pressed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Midland Zwei-Wege-Funkgerät Handbücher

Midland

Midland LXT114 Series Bedienungsanleitung

Midland

Midland X-Tra Talk LXT360 Series Bedienungsanleitung

Midland

Midland MXT275 Bedienungsanleitung

Midland

Midland LXT490VP3 Bedienungsanleitung

Midland

Midland X-Talker ALR2 Series Bedienungsanleitung

Midland

Midland XT-10 Handbuch

Midland

Midland 777 Bedienungsanleitung

Midland

Midland BR180 Bedienungsanleitung

Midland

Midland MXT115 Bedienungsanleitung

Midland

Midland GXT635 Series Bedienungsanleitung

Midland

Midland x-talker t70 series Bedienungsanleitung

Midland

Midland CT210 Bedienungsanleitung

Midland

Midland G 7 Bedienungsanleitung

Midland

Midland LXT380 Series Bedienungsanleitung

Midland

Midland X-Tra Talk GXT881 Bedienungsanleitung

Midland

Midland G 7 Handbuch

Midland

Midland X-TRA TALK MXT100 Bedienungsanleitung

Midland

Midland Alan 52 DS Bedienungsanleitung

Midland

Midland XT511 Bedienungsanleitung

Midland

Midland MICRO MOBILE MXT500 Bedienungsanleitung

Midland

Midland BIZTALK MB400 Bedienungsanleitung

Midland

Midland X-TALKER T77VP5J Bedienungsanleitung

Midland

Midland GMRS/FRS Radio LXT112 Series Bedienungsanleitung

Midland

Midland Alan 78 Pro Handbuch

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung

Motorola

Motorola DTR410 - On-Site Digital Radio Betriebsanleitung

Motorola

Motorola PRO7550 Bedienungsanleitung