Miele K 1803 Vi Bedienungsanleitung

Installation Instructions

Information is subject to change. Please refer to our website to obtain the most

current product specification, technical & warranty information.

To prevent accidents

and machine damage

read these instructions

before

installation or use.

Disposing of the packaging

materials

The packaging is designed to protect

the appliance from damage during

transportation. The packaging materials

used are selected from materials which

are environmentally friendly for disposal

and should be recycled.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of children. Return

the packaging to your dealer.

Disposal of your old appliance

Old appliances may contain materials

that can be recycled. Please contract

your local recycling authority about the

possibility of recycling these materials.

Instead, please contact your

municipality's waste collection center to

return and recycle electric and

electronic appliances.

Please take care not to damage the

pipework while the appliance is being

stored for transport to a waste disposal

facility.

By protecting the pipework, you help

keep the coolants and compressor oil

from contaminating the environment.

Before discarding an old appliance

disconnect it from the electrical supply

and cut off the power cord to prevent it

from becoming a hazard.

Caring for the environment

Have the appliance installed by a

qualified technician, according to

the enclosed installation

instructions.

WARNING

This appliance is top-heavy and

must be secured to prevent it from

tipping forward.

Keep the door closed until the

appliance is completely installed

and secured as per the installation

instructions.

Empty weight of your machine:

K 18x3 Vi ..........419lbs(189 kg)

K 19x3 Vi ..........452lbs(205 kg)

Climate Range

The appliance is designed for use

within certain climate ranges (ambient

temperatures) and should not be used

outside this range. The climate range of

this appliance is stated on the data

plate inside the appliance.

Climate

range

Ambient room temperature

+50°F (10 °C) to +90°F (32 °C)

+60°F (16 °C) to +90°F (32 °C)

+60°F (16 °C) to +100°F (38 °C)

+60°F (16 °C) to 110°F (43 °C)

Operating in a room which is too cold

will cause the compressor to switch off

for too long, causing the internal

temperature in the appliance to rise

with the risk of food deteriorating and

going off.

Installation site

The appliance should be installed in a

dry, well ventilated room.

Do not install the appliance:

- outdoors,

- in an environment with dripping

water,

- in rooms which are at risk of frost.

The installation location should not be

exposed to direct sunlight, nor near a

heat source, such as an oven,

radiator, etc.

The ambient temperature should not

drop below 55°F (13°C) or rise above

110°F (43°C), otherwise malfunctions

may occur.

If installation next to a heat source is

unavoidable observe the following

minimum distances from the heat

source:

–1

1/4" (3 cm) from an electric cooktop

or electric oven.

–12" (30 cm) from a gas or oil

cooktop, range or oven.

The following should also be taken into

consideration:

–The electrical outlet must be easily

accessible in case of an

emergency,not concealed behind

the appliance.

–The plug and cord must not touch

the rear of the appliance as they

could be damaged by vibrations

from the appliance.

–Do not plug in other devices behind

this appliance.

Installation

Important! When there is high

humidity a build-up of condensation

on the outer surfaces of the

appliance can occur.This can cause

the surfaces to corrode.To prevent

this, it is advisable to install the

appliance in a dry and/or an

air-conditioned room with sufficient

ventilation.Please ensure that doors

close and seal properly after

installation and that the appliance is

installed in accordance with these

installation instructions and and with

the required ventilation openings.

– If the room is too cold, it will cause

the cooling system in the appliance

to remain off for too long.This can

cause the temperature in the

appliance to rise, resulting in

damage.

Installation

Base

A fully loaded appliance is very heavy.

The load-bearing capacity of your floor

must meet the following requirements:

K 18x3 Vi ..........996lbs(452 kg)

K 19x3 Vi .........1,191 lbs (540 kg)

To ensure that the appliance is installed

securely and functions properly, the

base must be flat, level and made of a

hard, rigid material.

If in doubt, contact Miele.

Furniture/fixtures

The new appliance will be mounted

securely to adjacent and overhead

furniture/fixtures.

For this reason it is essential that all

attachable furniture/fixtures are

connected securely to the base or the

wall by suitable means.

Ventilation

The air intake and outlet must not be

blocked or covered in any way. They

also need to be dusted/cleaned on a

regular basis.

Installation niche

To ensure safe, trouble-free installation

and the best possible cosmetic result,

check to be sure that the installation

space complies with the installation

dimensions. See "Niche dimensions".

The side walls of the installation cavity

must be plumb.

The minimum thickness of the side

walls and the top wall must be 5/8"

(16 mm).

The minimum thickness of the toe-kick

panel must be ½" (13 mm). A thickness

of 3/4" (19 mm) is recommended.

Installation

Stainless steel panels

Stainless steel door panels and toe-kick

covers are available from Miele.

Custom door panels

This appliance is compatible with all

styles and designs of kitchen cabinetry.

The total weight of the decorative

panel(s) must not exceed the following:

K 18x3 Vi............110lbs(50kg)

K 19x3 Vi.............81lbs(37kg)

Installation options

There are many different installation

options. These are limited only by the

design of the kitchen.

The door hinge cannot be

exchanged.

Single column

The appliance can be installed at any

preferred location in the kitchen.

However, be sure the door will open

and close properly in the chosen

location.

Side-by-side

This appliance can be installed

"side-by-side" with another

fridge/freezer using a "Merging Kit".

The "Merging Kit" is available from

Miele.

Contact Miele or your dealer for

specific information about which

combinations will work with your

appliance.

For instructions on how to attach the

appliances and install the heating

mat, please refer to the instructions

included with the "Merging Kit",

available from Miele.

Installation without a partition using

the "Merging Kit"

If the appliances are installed directly

next to each other (without a partition),

they need to be attached together

using the "Merging Kit".

Installation

Installation with partition using the

"Merging Kit"

The minimum thickness of the partition

is 5/8" (16 mm).

If there is a partition with a thickness

from 5/8" (16 mm) to 6 5/16" (160 mm)

between the adjacent appliances, then

each appliance should be individually

installed within its own niche using the

mounting accessories included.

The "Merging Kit" will also be needed.

The "Merging Kit" is available from

Miele.

Installation with partition without

using the "Merging Kit"

If there is a partition with a thickness of

more than 6 5/16" (160 mm) between

the adjacent appliances, then each

appliance should be individually

installed within its own niche using the

mounting accessories included (the

"Merging Kit" is not necessary).

Side panels

If one side of the appliance is visible, a

side panel must be used.

The side panel must be firmly secured

to the wall, the floor and the overhead

furniture/fixtures before the appliance is

placed in the cavity.

The dimensions of the side panel are

taken from the opposite wall of the

installation space. During installation,

ensure that the cavity is square and the

measurements are correct.

Installation

Adjusting the door opening

angle (optional accessory)

Depending on the installation site, it

may be necessary to adjust the door

opening angle to 90°.

^Open the door.

^Insert the banking pin through the

holes and drive in with a hammer.

The door opening angle is now limited

to 90°.

Front panel gap kit (optional

accessory)

Two adjacent furniture doors can be

attached instead of one large door.

To connect these furniture doors on the

rear, a metal strip can be purchased as

an optional accessory. Contact Miele.

When attaching the metal strip to the

furniture doors, observe the maximum

length of the screws and the position of

the drill holes.

Always screw into the best possible

load-bearing material of the custom

doors.

Installation

Door dimensions (open min. 90°)

*The dimensions of the door fronts and

handles will vary according to each

individual kitchen.

3/8" (10 mm)

ABC

K 18X3 Vi 32 5/8" (829 mm) Door front max. 1 1/2" (38 mm) Door handle*

K 19X3 Vi 38 11/16" (982 mm) Door front max. 1 1/2" (38 mm) Door handle*

Door dimensions (open min. 115°C)

*The dimensions of the door fronts and

handles will vary according to each

individual kitchen.

ABCD

K 18X3 Vi 32 5/8" (829 mm) Door front max.

1 1/2" (38 mm)

Door handle* 14 5/16"

(363 mm)

K 19X3 Vi 38 11/16" (982 mm) Door front max.

1 1/2" (38 mm)

Door handle* 16 7/8"

(428 mm)

Dimensions

Niche dimensions

Niche width (A)

K 18X3 Vi 30" (762 mm)

K 19X3 Vi 36" (915 mm)

Dimensions

Andere Handbücher für K 1803 Vi

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miele Kühlschrank Handbücher

Miele

Miele KFN 9753 ID Bedienungsanleitung

Miele

Miele K 852i Technisches Datenblatt

Miele

Miele KF 2802 Vi Bedienungsanleitung

Miele

Miele K 3512 SD ed-3 Technisches Datenblatt

Miele

Miele KF 2902 Vi Bedienungsanleitung

Miele

Miele KF 1901 Vi Bedienungsanleitung

Miele

Miele K 9122 Ui Bedienungsanleitung

Miele

Miele K 7763 E Bedienungsanleitung

Miele

Miele KFN 7734 F Bedienungsanleitung

Miele

Miele KFN 37432 iD Bedienungsanleitung

Miele

Miele K 5122 Ui Bedienungsanleitung

Miele

Miele KFNS 37682 iD Bedienungsanleitung

Miele

Miele KF 2801 Vi Bedienungsanleitung

Miele

Miele K 32222 i Bedienungsanleitung

Miele

Miele K 28202 D edt/cs Bedienungsanleitung

Miele

Miele KFN 12924 SD Technisches Datenblatt

Miele

Miele KFN 9753 ID Bedienungsanleitung

Miele

Miele K 12020 S Bedienungsanleitung

Miele

Miele KFN 9755 IDE Bedienungsanleitung

Miele

Miele K 3214 S Technisches Datenblatt

Miele

Miele K9552 Bedienungsanleitung

Miele

Miele KFNS 37692 iDE Bedienungsanleitung

Miele

Miele KFN 14943 SD ed Bedienungsanleitung

Miele

Miele K 2326 S Technisches Datenblatt

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung