Miele KFN 9855 iDE Bedienungsanleitung

Installation Instructions

KFN 9855 iDE en - CA

Installation, repair and maintenance work should be performed by

a Miele authorized service technician in accordance with national

and local safety regulations and the provided installation instructions.

Disposing of the packaging

materials

The packaging is designed to protect

the appliance from damage during

transportation. The packaging materials

used are selected from materials which

are environmentally friendly for disposal

and should be recycled.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of children. Return

the packaging to your dealer.

Disposal of your old appliance

Old appliances may contain materials

that can be recycled. Please contact

your local recycling authority about the

possibility of recycling these materials.

Please take care not to damage the

pipework while the appliance is being

stored for transport to a waste disposal

facility.

By protecting the pipework, you help

keep the coolants and compressor oil

from contaminating the environment.

Before discarding an old appliance

disconnect it from the electrical supply

and cut off the power cord to prevent it

from becoming a hazard.

Caring for the environment

Safe operation of the appliance is

only assured if it has been installed

and connected in accordance with

these Operating and Installation

Instructions.

WARNING!

Danger of tipping! To avoid a

hazard secure the appliance in

accordance with these instructions.

WARNING!

This appliance is very heavy and

can tip forwards when the door /

freezer drawers are open. Keep the

appliance door shut until the

appliance has been installed and

secured in the cabinetry in

accordance with these Operating

and Installation Instructions.

The appliance should be installed

with the assistance of another

person.

This fridge/freezer combination

should not be installed side-by-side

with another fridge/freezer

combination.

The appliance does not have heated

side walls, a side-by-side

arrangement can lead to a build-up

of condensation water.

Location

The appliance should not be installed

directly next to a heat source (such as

a range or a heater) or under a window

in direct sunlight. The higher room

temperature, the more energy the

appliance requires to operate. Most

suitable is a dry, well-ventilated room.

The following should also be taken into

consideration:

– The plug must be easily accessible

and not concealed behind the

appliance so that the appliance can

be quickly disconnected from the

electrical supply in an emergency. In

addition, no other appliances should

be plugged into a socket located

directly behind this appliance.

– The power cord must not come into

contact with the back of the

appliance, it could be damaged by

vibrations from the appliance

resulting in a short circuit.

Important! When there is high

humidity there can be a build-up of

condensation on the outer surfaces

of the appliance. This can cause the

surfaces to corrode.

To prevent this, install the appliance

in a dry and/or an air-conditioned

room with sufficient ventilation.

Please ensure that doors are closing

and sealing properly after installation

and that the appliance is installed in

accordance with these installation

instructions and with the required

ventilation openings.

Installation Information

Climate class

The appliance is designed for use

within a certain climate range (room

temperature range) and should not be

used outside this range. The climate

range is specified on the data plate

inside the appliance.

Climate class Room temperature

50 °F to 90 °F

(+10 °C to +32 °C)

61 °F to 90 °F (+16 °C to

+32 °C)

61 °F to 100 °F

(+16 °C to +38 °C)

61 °F to 109 °F

(+16 °C to +43 °C)

If the room is too cold, it will cause the

cooling system in the appliance to

remain off for too long. This can cause

the temperature in the appliance to rise,

resulting in damage.

Installation niche

Before installing the appliance, the

cabinet must be carefully aligned using

a level. The cabinet corners must be at

a 90° angle to one another, otherwise

the cabinet door will not be flush with all

4 corners of the cabinet. The sidewalls

of the installation niche must be even.

Niche floor

To ensure that the appliance is installed

safely and to assure all the functions,

the floor of the niche where the

appliance is to be installed must be

even and horizontal.

It must be made from strong, rigid

material.

The appliance is extremely heavy when

fully loaded, and for this reason it is

imperative that the floor it stands on is

able to bear its weight. If in doubt,

contact Miele.

When fully loaded, the approx. weight

of the appliance is 1200 lbs (544 kg).

Adjacent furniture/units

The new appliance will be mounted

securely to adjacent furniture/fixtures.

For this reason, it is essential that all

furniture/fixtures be connected securely

to the ground and/or wall.

Door hinge

The appliance is supplied with fixed

hinges. If the door needs to be

hinged on the opposite side, contact

Miele.

Do NOT change the door hinging

yourself!

Installation Information

Proper ventilation

This appliance does not require

ventilation openings in the surrounding

cabinetry. Proper ventilation is ensured

though the ventilation slits at the base

of the appliance.

WARNING! Danger of damage from

overheating. May restrict operation.

Keep ventilation openings, in the

appliance enclosure or in the built-in

structure, clear of obstruction.

Use only the matching base cover

with the ventilation slits!

If there is insufficient ventilation, the

compressor will run more often and

over a longer period of time. This

results in higher energy

consumption and a higher

compressor temperature which can

damage the compressor.

Installation Information

Before installation, ensure the building-in niche is the correct size. The specified

ventilation cross-sections must be adhered to in order to ensure the correct

functioning of the appliance.

AB C D E F

KFN 9855 iDE 3"

(76 mm)

79 13/16"

(2,027 mm)

29 13/16"

(757 mm)

24"

(610 mm)

55 5/8"

(1,413 mm)

37 1/2"

(952 mm)

Installation Dimensions

aThis dimension line indicates the

height measured from the floor.

Opening angle of the door

Ensure that there is sufficient space at

the installation location for the door to

open wide enough.

These measurements do not take

the cabinet front and the door

handle into account; they must be

added on accordingly.

Installation Dimensions

Cabinet Width

Inset cabinet

Depth

Frameless/Face

frame cabinet

Depth

Cabinet Height

30"

(762 mm)

24" (610 mm)

+ panel

thickness

24" (610 mm) 80"

(2,032 mm)

If you wish for the appliance panel to be flush with adjacent cabinetry, the

adjacent cabinetry depth must equal appliance depth 24" (610 mm) plus panel

thickness 5/8" – 3/4" (16 mm - 19 mm).

Niche Dimensions

The location of the electrical outlet

can be within a radius of 80" from the

appliance top center. Do not install

the electrical outlet behind the

appliance!

aTop view

bRight side wall of appliance housing

cFront of appliance housing

dFront panel - door closed

eFront panel - door opening angle = 115°

fPanel thickness

Door Swing Clearance

Water line feed-in (D) from left or right

above the anti-tipping bracket.

Do not install the shut-off valve

behind the appliance!

The water line lead-through for the

water supply line (E) is at the bottom

right of the appliance:

Planning the Water Connection

Andere Handbücher für KFN 9855 iDE

Inhaltsverzeichnis

Andere Miele Kühlschrank Handbücher

Miele

Miele KFN 14943 SD ed Bedienungsanleitung

Miele

Miele KFNS 7795 D Bedienungsanleitung

Miele

Miele K 11820 SD Bedienungsanleitung

Miele

Miele KF 1911 Vi Technisches Datenblatt

Miele

Miele KFN 12823 SD ed Bedienungsanleitung

Miele

Miele KS 28463 D Bedienungsanleitung

Miele

Miele KS 4783 ED Bedienungsanleitung

Miele

Miele KFN 13923 DE Bedienungsanleitung

Miele

Miele K 2601 Vi Bedienungsanleitung

Miele

Miele KFNS 37682 iD Bedienungsanleitung

Miele

Miele KFN 37682 iD Bedienungsanleitung

Miele

Miele K 9554 iDF Montageanleitung

Miele

Miele KFN 9755 IDE Bedienungsanleitung

Miele

Miele K 26 1 Vi Series Bedienungsanleitung

Miele

Miele KF 2981 Vi Bedienungsanleitung

Miele

Miele KT 4353 SD ed Technisches Datenblatt

Miele

Miele TX3587 Bedienungsanleitung

Miele

Miele K 2202 S-1 Bedienungsanleitung

Miele

Miele KFNS 37692 iDE-1 Bedienungsanleitung

Miele

Miele F 1813 SF Bedienungsanleitung

Miele

Miele KFN 14927 SD ed Montageanleitung

Miele

Miele K 9758 iDF Technisches Datenblatt

Miele

Miele KF 2801 Vi Bedienungsanleitung

Miele

Miele KFN 15842 D edt/cs Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung