Miele KWT 6312 UGS Bedienungsanleitung

Installation Instructions

KWT 6312 UGS en - CA

Installation, repair and maintenance work should be performed by

a Miele authorized service technician in accordance with national

and local safety regulations and the provided installation instructions.

Disposing of the packaging

materials

The packaging is designed to protect

the appliance from damage during

transportation. The packaging materials

used are selected from materials which

are environmentally friendly for disposal

and should be recycled.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of children. Return

the packaging to your dealer.

Disposal of your old appliance

Old appliances may contain materials

that can be recycled. Please contact

your local recycling authority about the

possibility of recycling these materials.

Please take care not to damage the

pipework while the appliance is being

stored for transport to a waste disposal

facility.

By protecting the pipework, you help

keep the coolants and compressor oil

from contaminating the environment.

Before discarding an old appliance

disconnect it from the electrical supply

and cut off the power cord to prevent it

from becoming a hazard.

Caring for the environment

,Failure to follow these

instructions can result in death, fire,

or electrical shock.

Improper connection of the

equipment grounding conductor

may result in electric shock.

If you are in any doubt as to whether

the appliance has been properly

grounded, have the appliance

checked by a qualified electrician or

service technician.

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer will

not be held responsible for damage

or injury arising from unauthorized

work.

Before installing the appliance,

verify that the voltage, load and

circuit rating information found on

the data plate match the household

electrical supply.

,To guarantee the electrical

safety of this appliance, continuity

must exist between the appliance

and an effective grounding system.

It is imperative that this basic safety

requirement be met. If there is any

doubt, have the electrical system of

the house checked by a qualified

electrician.

,This appliance is equipped with

a three-prong grounding plug to

prevent shock hazards. It should be

plugged directly into a properly

grounded outlet. Do not cut or

remove the grounding prong from

the plug. If the plug does not fit the

outlet, have the proper outlet

installed by a licensed electrician.

Do not use extension cords or

ungrounded (two prong) adapters.

Connect this appliance to a 110 –

120 VAC, 60 Hz and 15 amp (20 amp

for side-by-side) circuit with a circuit

breaker or fuse.

This appliance must be grounded

according to local or national codes.

Electrical connection

The appliance must be connected to an

electrical outlet that is properly

grounded. The electrical installation

must comply with the applicable

electrical code.

The plug must be easily accessible and

not concealed behind the appliance so

that the appliance can quickly be

disconnected from the electricity

supply in an emergency. In addition, no

other appliances should be plugged

into a socket located directly behind

this appliance.

The power cord must not come into

contact with the back of the appliance,

as they could be damaged by

vibrations from the appliance. This may

result in a short circuit.

Do not use an extension cord to

connect the appliance to the power

supply. Extension cords do not

guarantee the required safety of the

appliance (e.g. they pose a danger of

overheating).

Do not connect the appliance to

stand-alone inverters, such as those

used with an autonomous energy

source, e.g. solar power systems.

Otherwise, when the appliance is

switched on, peak loads in the system

can cause the safety shutdown

mechanism to be triggered. This can

damage electronic units.

In addition, the appliance must not be

used with energy-saving devices,

which reduce the amount of energy

supplied to the appliance and cause it

to overheat.

If the power cord needs to be replaced,

this work must only be performed by a

qualified electrician.

Electrical connection

To avoid tipping over, the appliance

must be properly installed and

secured.

WARNING!

Danger of tilting! To avoid a hazard

due to instability of the appliance, it

must be secured in accordance with

the instructions.

Side-by-side installation

To avoid a build-up of condensation

and resultant damage, refrigerators and

freezers should not generally be

installed directly next to other such

appliances.

However, this wine storage unit can be

installed side-by-side with certain

models.

Please contact Miele for specific

information about which

combinations will work with your

appliance.

Location

This appliance should not be installed

where it is exposed to direct sunlight or

directly adjacent to a heat-producing

appliance such as an oven or a

radiator. The room temperature should

not go above or below the climate

range for which the appliance is

designed. The higher the ambient

temperature of the room, the more

energy the appliance requires to

operate.

The appliance should be installed in a

dry, well-ventilated room.

The following should also be taken into

consideration:

– The plug must be easily accessible

and not concealed behind the

appliance so that the appliance can

quickly be disconnected from the

electricity supply in an emergency. In

addition, no other appliances should

be plugged into a socket located

directly behind this appliance.

– The power cord must not come into

contact with the back of the

appliance, as they could be

damaged by vibrations from the

appliance. This may result in a short

circuit.

Installation

Climate class

The appliance is designed for use

within a certain climate range (ambient

temperatures) and should not be used

outside this range. The climate range of

the appliance is stated on the data

plate inside the appliance.

Climate class Room temperature

+50°F to +90°F

(+10°C to +32°C)

+60°F to +90°F

(+16°C to +32°C)

+60°F to +100°F

(+16°C to +38°C)

+100°F to 110°F

(+16°C to +43°C)

Operating in a room which is too cold

will cause the compressor to turn off for

too long, causing the internal

temperature in the appliance to rise

resulting in damage.

,Caution:

At altitudes above 4921 ft. (1500 m)

there is a risk of the glass door

shattering!

Shards of glass can cause injury!

Ventilation

WARNING! Danger of damage from

overheating. May restrict operation.

Keep ventilation openings, in the

appliance enclosure or in the built-in

structure, clear of obstruction.

The ventilation gaps given must be

observed, otherwise the compressor

will run more frequently and for

longer periods. This will result in

increased energy consumption and

a higher operating temperature for

the compressor. This may, in turn,

cause the compressor to be

damaged.

The appliance is ventilated via the

grill in the plinth.

This must not be covered over or

blocked.

Clean the plinth regularly to remove

any dust.

Installation

The cut-out in the plinth facing must

be aligned centrally with the

appliance.

Before installation

^Before installation, take any

accessories out of the appliance

and/or from the back of the

appliance.

^Remove any cable clips from the

back of the appliance.

^Check that all parts at the back of the

appliance are unhindered. Carefully

remove any hindrance.

Door opening angle limiter

The door opening angle limiter restricts

the opening angle to 90°. This may be

necessary if the appliance door hits an

adjacent wall when opened, for

example (see "Adjusting the door

hinge").

Installation

Installation dimensions

Before installation, ensure the building-in niche is the correct size. The specified

ventilation cross-sections must be adhered to and the cut-out in the plinth must

be aligned centrally with the appliance in order to ensure the correct functioning

of the appliance.

The ventilation grill and foam block supplied must be installed and used

together.

Installation

View from above

Installation

The door hinges are factory set so that

the door can be opened wide.

However if the opening angle of the

door needs to be limited for any reason,

the hinge can be adjusted to

accommodate this.

If, for instance, when it is opened the

appliance door would hit an adjacent

wall, you should limit the opening angle

of the appliance door to 90°:

^Insert the limit pins provided into the

hinges from above.

This will limit the opening angle of the

appliance door to 90°.

Adjusting the door hinge

Andere Handbücher für KWT 6312 UGS

Inhaltsverzeichnis

Andere Miele Kühlschrank Handbücher

Miele

Miele K 14827 SD Bedienungsanleitung

Miele

Miele KF 1801 Vi Bedienungsanleitung

Miele

Miele K 1911 SF Bedienungsanleitung

Miele

Miele K 35222 iD Bedienungsanleitung

Miele

Miele KFN 13923 DE Bedienungsanleitung

Miele

Miele KFN 9758 iD-3 Bedienungsanleitung

Miele

Miele KF 2802 Vi Bedienungsanleitung

Miele

Miele KFN 37452 iDE Bedienungsanleitung

Miele

Miele KFNS 37692 iDE-1 Bedienungsanleitung

Miele

Miele K 4323 ED ws Bedienungsanleitung

Miele

Miele KS 37472 iD Bedienungsanleitung

Miele

Miele K 1901 SF Bedienungsanleitung

Miele

Miele K 1801 SF Bedienungsanleitung

Miele

Miele KFN 8996 SDE ED-1 Technisches Datenblatt

Miele

Miele KFN 14943 SDE ED Bedienungsanleitung

Miele

Miele KFN 37682 iD Bedienungsanleitung

Miele

Miele KFN 14927 SD ed Montageanleitung

Miele

Miele K 28202 D edt/cs Bedienungsanleitung

Miele

Miele KFN 15943 DE edt/cs Bedienungsanleitung

Miele

Miele K 9122 Ui Bedienungsanleitung

Miele

Miele KFN 8992 SD ED Bedienungsanleitung

Miele

Miele KFN 14943 SDE ED Bedienungsanleitung

Miele

Miele KSK 2002 Bedienungsanleitung

Miele

Miele KFNF 9959 iDE Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung

Matsui

Matsui MTT50W12E Bedienungsanleitung