Miele KSK 2002 Bedienungsanleitung

MasterCool Refrigeration

Side-by-Side Merging Combinations

For Vi Models

KSK 2002

8mieleusa.com

Specification Sheets TRS01092018

Page 2 of 12

Side-by-Side Merging Kit

KSK 2002

The merging kit should be used for side-by-side installation of Miele MasterCool

units.

SPECIFICATIONS

Electrical

Power Cord Direct connection to left-standing appliance

Support

Call Miele (800) 999-1360

Miele Website 8www.mieleusa.com

20/20 Link 82020technologies.com

KSK 2002

Item 38996071USA

Page 3 of 12

Side-by-side

...without partition

If the appliances are installed directly

next to each other (without a partition),

they need to be attached together. A

heating mat must also be installed. This

will help avoid condensation and

prevent damages.

...withpartition

The minimumthicknessofthe partition

is 5/8"(16 mm).

If thereisapartition withathickness

from 5/8"(16 mm)to65/16" (160 mm)

betweenthe adjacentappliances, then

each appliance should be individually

installed within itsown niche using the

mountingaccessories included.

In this case,you will only need the

heating matfrom the "Merging Kit" to

avoid condensationand prevent

damages.

Side-by-side

...without partition

If the appliances are installed directly

next to each other (without a partition),

they need to be attached together. A

heating mat must also be installed. This

will help avoid condensation and

prevent damages.

...withpartition

The minimumthicknessofthe partition

is 5/8"(16 mm).

If thereisapartition withathickness

from 5/8"(16 mm)to65/16" (160 mm)

betweenthe adjacentappliances, then

each appliance should be individually

installed within itsown niche using the

mountingaccessories included.

In this case,you will only need the

heating matfrom the "Merging Kit" to

avoid condensationand prevent

damages.

Side-by-side

...without partition

If the appliances are installed directly

next to each other (without a partition),

they need to be attached together. A

heating mat must also be installed. This

will help avoid condensation and

prevent damages.

...withpartition

The minimumthicknessofthe partition

is 5/8"(16 mm).

If thereisapartition withathickness

from 5/8"(16 mm)to65/16" (160 mm)

betweenthe adjacentappliances, then

each appliance should be individually

installed within itsown niche using the

mountingaccessories included.

In this case,you will only need the

heating matfrom the "Merging Kit" to

avoid condensationand prevent

damages.

less than 6 5/16” (160 mm)

•

Side-by-Side Merging Kit

KSK 2002

In this case, you will only need the heating

mat from the “Merging kit” to avoid conden-

staion and prevent damages. Please be

aware the left unit’s cutout will require an

additional 1/8” (3 mm) to the width to allow

installation of the heating mat.

HEATING MAT DETAILS FOR KSK

202

Merging kit must be used when combining units

All Installations must be done in accordance with local codes

•

KSK 2002- Heating mat connects directly to left-stand-

ing appliance