Migatronic FOCUS MIG Bedienungsanleitung

QUICKGUIDE

FOCUS MIG

50113753

CLASSIC - Factory setting

Setting possibilities Area Step Factory setting Unit

2T/4T

Primary parameters:

1 Wire feed speed FOCUS MIG 300 1.5-15 0.1 3 m/min

Wire feed speed FOCUS MIG 400 1.5-27 0.1 3 m/min

2 Arc voltage FOCUS MIG 300 13-32 0.1 18 V

Arc voltage FOCUS MIG 400 13-37 0.1 18 V

Secondary parameters:

1 Inductance -5.0- +5.0 0.1 0.0 -

2 Gas pre ﬂow 0.0-10.0 0.1 0.2 s

3 Soft start Off / 1.5-15.0 0.1 3 m/min

6 Burnback 1-30 1 5 ms

7 Gas post ﬂow 0.0-10.0 0.1 3 s

QUICKGUIDE FOCUS MIG

4 Wire feed speed

Press the key and turn the control knob until

the desired wire feed speed is achieved.

5 Control knob

Adjustment of wire feed speed and arc

voltage. If the key for secondary parameters

is active, it is possible to adjust the

parameters lying behind.

6 Selecting trigger mode

Change between 2-stroke (indicator off) and

4-stroke (indicator on).

2-stroke: The welding process starts when

the torch trigger is activated and ends when

the torch trigger is released.

4-stroke: The welding process starts when

the torch trigger is activated and released,

and ends when the torch trigger is activated

again.

7 Secondary parameters

Press the key until the desired parameter is

shown on the display.

Press key 4 brieﬂy to ﬁnish.

AWelding voltage

B Warning – overheating

CWire inching

Press the key and hold it down while

activating the torch trigger. Release the key

when wire inching starts. Wire inching stops

when the torch trigger is deactivated.

CLASSIC control panel

I. Switch on the machine

II. Set wire feed speed

III. Set arc voltage

1 Arc voltage - ﬁne steps

Push of the key increases the arc voltage in

ﬁne steps.

2 Arc voltage - rough steps

Push of the key increases the arc voltage in

rough steps.

3 Arc voltage - inﬁnitely variable

The arc voltage can be adjusted as required.

Press the key under the symbol and turn the

control knob until the desired arc voltage is

achieved.

FOCUS MIG 300: 13-32 V

FOCUS MIG 400: 13-37 V

Arc adjust (electronic choke)

Set welding current (A)

Soft start

(m/min.)

Gas pre ﬂow (t)

Burnback

Gas post

ﬂow (t)

4/C

Andere Migatronic Schweißsystem Handbücher

Migatronic

Migatronic RALLY MIG 161i Bedienungsanleitung

Migatronic

Migatronic OMEGA2 BOOST Bedienungsanleitung

Migatronic

Migatronic Automig X Bedienungsanleitung

Migatronic

Migatronic FLEX2 3000 Compact Bedienungsanleitung

Migatronic

Migatronic FOCUS 200 AC/DC PFC Bedienungsanleitung

Migatronic

Migatronic PI 320 DC Bedienungsanleitung

Migatronic

Migatronic PI 400 PLASMA Bedienungsanleitung

Migatronic

Migatronic PI PLASMA Bedienungsanleitung

Migatronic

Migatronic MWF 11x Bedienungsanleitung

Migatronic

Migatronic ZETA 60 Bedienungsanleitung

Migatronic

Migatronic Sigma Core 300 Compact Bedienungsanleitung

Migatronic

Migatronic AUTOMIG PULSE Series Bedienungsanleitung

Migatronic

Migatronic MIG 300 STB Bedienungsanleitung

Migatronic

Migatronic RWF 30 Bedienungsanleitung

Migatronic

Migatronic MIGALOG Bedienungsanleitung

Migatronic

Migatronic SIGMA Select 300 Bedienungsanleitung

Migatronic

Migatronic SIGMA ONE Bedienungsanleitung

Migatronic

Migatronic TIG Scout 160 HP Bedienungsanleitung

Migatronic

Migatronic RALLY MIG 161i Bedienungsanleitung

Migatronic

Migatronic SIGMA2 300 COMPACT/S Bedienungsanleitung

Migatronic

Migatronic AUTOMIG Bedienungsanleitung

Migatronic

Migatronic PILOT 200 HP Bedienungsanleitung

Migatronic

Migatronic Commander Bedienungsanleitung

Migatronic

Migatronic RALLY MIG 161i Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung