Mikroe CODEGRIP FOR PIC Bedienungsanleitung
P A G E 1
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
USER MANUAL
for PIC MCUs
Thank you for choosing Mikroe!
We present you the ultimate debugger and programmer over USB/WiFi solution for embedded development.
Elegant on the surface, yet extremely powerful on the inside, we have designed it to inspire outstanding achievements.
And now, it’s all yours.
Enjoy premium.
Time-saving embedded tools
Table of contents
Introduction 5
1. Installing CODEGRIP Suite 6
2. CODEGRIP 8
2.1 USB connectivity 9
2.2 WiFi connectivity 9
2.3 Target connector 10
2.4 CODEGRIP adapters 11
2.5 LED indicators 13
3. CODEGRIP Link structure 14
2.1 Link types 14
2.2 Link states 14
4. CODEGRIP Suite overview 16
4.1 Menu section 17
4.2 Menu item section 17
4.3 Shortcuts bar 17
4.4 Status bar section 18
5. CODEGRIP Suite explained 19
5.1 Target MCU 19
5.2 CODEGRIP 26
5.3 POWER 36
5.4 OPTIONS 37
5.5 HELP 38
Troubleshooting 40
6.1 Target programming errors 40
6.2 Licensing errors 41
CODEGRIP for PIC®is a unified solution, designed to perform
programming and debugging tasks on a range of different
microcontroller devices (MCUs) based on the PIC®, dsPIC,
PIC24 and PIC32 architectures from Microchip. By bridging
differences between various MCUs, it allows a huge number
of MCUs to be programmed and debugged. More MCUs might
be added in the future, along with some new functionalities.
Thankstosomeadvancedanduniquefeaturessuchaswireless
connectivity and USB-C connector, the task of programming
of various PIC®based microcontrollers becomes seamless
and effortless, providing users with both the mobility and the
complete control over the microcontroller programming and
debugging process. The USB-C connector offers improved
performance and reliability, compared to traditionally used
USB Type A/B connectors. Wireless connectivity redefines
the way the development board can be used.
The graphical user interface (GUI) of the CODEGRIP Suite is
clear, intuitive, and easy to learn, offering a very pleasant user
experience. The embedded HELP system provides detailed
guidelines for every aspect of the CODEGRIP Suite.
P A G E 6
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
INSTALLATION
1. Installing CODEGRIP Suite
2.
Select the
destination
folder
1.
Start the
installation
The installation process is easy and straightforward.
Download CODEGRIP Suite software application from the link www.mikroe.com/setup/codegrip and follow the steps below.
3.
Select the
components
to install
4.
License
agreement
P A G E 7
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
6.
Start the
installation
process
5.
Select the
start menu
shortcuts
INSTALLATION
7.
Installation
progress
8.
Finish the
installation
process
P A G E 8
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
The CODEGRIP device offers a set of unique and innovative
functionalities, some of which have never been used before
on a similar device. These functionalities include wireless
programming and debugging, power monitoring, and more.
The CODEGRIP device comes in two different types: as a
stand-alone device and an integrated on-board module. This
manual will be focused on the stand-alone CODEGRIP device.
In order to better understand how this device is operated, this
chapter will give you a brief overview of its basic hardware
functions.
2. CODEGRIP
P A G E 8 CODEGRIP
P A G E 9
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
2.1 USB connectivity
2.2 WiFi connectivity
The USB-C connector is the latest upgrade of the conventional USB A/B
type connectors, typically found on most personal computers today. The
USB-C connector has many advantages over the USB type A/B connector
such as the completely symmetrical design which reduces the possibility
of the connector misalignment and the damage it might cause, higher
current capability, and more. However, if there is not appropriate USB-C
connector on the host PC, a USB-C cable adapter can be used.
The CODEGRIP device can be linked with the CODEGRIP Suite over the WiFi
network, allowing it to program and debug the target MCU wirelessly. This
is a revolutionary new feature, which allows some unique usage scenarios,
currently not available on any other programming/debugging solution in
the world. The WiFi connectivity option offers a complete autonomy of
the development system. Running a toxic gas sensor application while
debugging the firmware in real time, programming it with a new firmware
during exposure, having sensor responses collected and logged remotely
CODEGRIP
P A G E 9
N O T ETo use the WiFi functionality, a separate registration code is required. It
can be bought from the official Mikroe online store www.mikroe.com
from several different base points, debugging drone firmware while it is in
mid-air… This is just a simple example of what CODEGRIP can offer.
The WiFi module on the CODEGRIP device has an integrated chip antenna,
which allows good WiFi reception. However, if a stronger WiFi signal is
required, the CODEGRIP device offers an SMA connector for an external
WiFi antenna.
The WiFi link can be protected by a password, or by the MAC address
filtering option.
2.3 Target connector
CODEGRIP firmware
The CODEGRIP device can be used with any hardware, equipped with the
ICSP/EJTAG programming header. Packed in a sturdy casing with rubber
feet, it can be used independently, bringing all the powerful features to a
third-party hardware.
The CODEGRIP device is based on the powerful 32-bit MCU, which utilizes a
complex firmware to provide all the required functionalities. The firmware
will be continuously improved so that additional optimizations, functions,
and support for new MCU families might be added in the future. Therefore,
the complete CODEGRIP programming environment is designed so that
the firmware upgrade process is effortless and easy.
On the bottom of the CODEGRIP device there is the sticker which contains
additional information.
∫Supported MCU family/architecture
∫Unique serial number
∫Unique WiFi MAC address
TMSVCC-TGT
TCK/PGC
GND
TDO/PGD
GND
TDI
MCLR
NC
NC
NC
GND
NC
GND
NC
GND
NC
GND
NCGND
The CODEGRIP device is equipped with the target MCU connector, which
contains ICSP/EJTAG and power supply pins. This connector is used to
interface the CODEGRIP device with the target MCU, allowing it to perform
programming and debugging operations, to provide the power supply for
the target MCU, and to be used as the power input when the CODEGRIP
device is powered from the connected development board.
N O T E When the connected host board provides power to the CODEGRIP
device, CODEGRIP input voltage must be in range 2.5V to 10V.
Inhaltsverzeichnis
Andere Mikroe Hauptplatine Handbücher
Mikroe
Mikroe Mikromedia 4 Bedienungsanleitung
Mikroe
Mikroe Mikromedia 4 Bedienungsanleitung
Mikroe
Mikroe EasyMx PRO v7a Bedienungsanleitung
Mikroe
Mikroe MAGNETO click Bedienungsanleitung
Mikroe
Mikroe EasyAVR PRO v8 Bedienungsanleitung
Mikroe
Mikroe COUNTER click Bedienungsanleitung
Mikroe
Mikroe RA4M1 CLICKER Bedienungsanleitung
Mikroe
Mikroe CLICKER 4 For TMPM4K Bedienungsanleitung
Mikroe
Mikroe mikromedia 5 Bedienungsanleitung
Mikroe
Mikroe EasyPIC V8 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
