MikroTik RouterBOARD OmniTik 5HnD Bedienungsanleitung

RouterBOARD OmniTik 5HnD

Quick Setup Guide and Warranty Information

The RouterBOARD OmniTik comes preinstalled in an outdoor case, with a built-in 5GHz

802.11a/n wireless and five 10/100 Ethernet ports which support MDI-X auto detection.

There are two built-in antennas. One antenna is v-pol, the other is h-pol. Antenna gain is

7.5dbi. The device is packaged with a 24V power adapter, a PoE injector, a mounting

bracket and a hose clamp.

First use

•Open the small door on the bottom of the case, connect an Ethernet cable to the

Ethernet port. If you want to connect more than one Ethernet cable, you have to

break out the hole-blockers.

•OmniTik accepts 8-30V Passive PoE from a PoE injector. The package includes a

24V power adapter and a PoE injector.

•The default IP address from LAN is 192.168.88.1 for configuration

•Username is admin and there is no password

Powering

The board accepts powering from the Ethernet port (Passive PoE):

•Ethernet port accepts passive Power over Ethernet 8-30V DC. Package contains a

24V adapter and a PoE injector.

Maximum power consumption of the device is 9W.

Power output

The OmniTik UPA-5HnD can supply PoE powering to external devices from its Ethernet

ports. This is convenient as you don't need any additional PoE injectors on a tower to pow-

er other wireless devices. This feature is indicated by the letter “P” in the device model

name. The output Voltage will be the same as input Voltage, and this feature will have to be enabled on the specific

ports in RouterOS software. By default it is disabled. Output is possible on ports 2-5. Once Power Output is enabled in

RouterOS, the Ethernet LED light turns from Green, to Red. Read LED means the port is currently providing PoE

power.

Booting process

This device doesn't come fitted with a Serial Port connector, so initial connection has to be done via the Ethernet ca-

ble, using the MikroTik Winbox utility. Winbox should be used to connect to the default IP address of 192.168.88.1

with the username admin and no password.

In case IP connection is not available, Winbox can also be used to connect to the MAC address of the device. Infor-

mation here: http://wiki.mikrotik.com/wiki/First_time_startup

In case you wish to boot the device from network, for example to use MikroTik Netinstall, hold the RESET button of

the device when starting it until the LED light turns off, and the device will start to look for Netinstall servers.

Mounting

OmniTik comes bundled with one mounting bracket and one hose clamp for putting the device on a pole. You should

avoid connecting a loose Ethernet cable to the Ethernet port, secure the cable to a wall or the pole, so that the cable

weight is not pulling the port. It is recommended to secure the Ethernet cable less than 2m from the device. This is to

ensure that the cable doesn't damage the port by its weight, or doesn't fall out.

www.routerboard.com !21 Nov 20161

Expansion Slots and Ports

•One built in 5GHz 802.11a/n wireless, 2x2 MIMO. Two built-in antennas (h-pol and v-pol)

•Five individual 10/100 Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X), so

you can use either straight or cross-over cables for connecting to other network devices. The First Ethernet

port accepts 8-30V DC powering from a passive PoE injector.

•One USB2.0 port

Buttons and Jumpers

• RouterOS reset jumper hole (no direct access, board has removed from case) – resets RouterOS software to de-

faults. Must short circuit the metallic sides of the hole (with a screwdriver, for example) and boot the device. Hold

screwdriver in place until RouterOS configuration is cleared.

• RouterBOOT reset button (access through the plastic door) has two functions:

• Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configu-

ration (same result as with reset hole)

• Hold this button during boot time longer, until LED turns off, and then release it to make the device look for

Netinstall servers.

Operating System Support

Currently tested operating system is MikroTik RouterOS (starting from version v6).

duced or transmitted in any form without prior written permission from the copyright holder. RouterBOARD, RouterOS,

RouterBOOT and MikroTik are trademarks of MikroTikls SIA. All trademarks and registered trademarks appearing in

this document are the property of their respective holders.

Hardware. MikroTik warrants all RouterBOARD series equipment for the term of twelve (12) months from the shipping

date to be free of defects in materials and workmanship under normal use and service, except in case of damage

caused by mechanical, electrical or other accidental or intended damages caused by improper use or due to wind,

rain, fire or other acts of nature.

To return failed units to MikroTik, you must perform the following RMA (Return Merchandise Authorization) procedure.

Follow the instructions below to save time, efforts, avoid costs, and improve the speed of the RMA process.

1. If you have purchased your product from a MikroTik Reseller, please contact the Reseller company regarding

all warranty and repair issues, the following instructions apply ONLY if you purchased your equipment directly

from MikroTik in Latvia.

2. We do not offer repairs for products that are not covered by warranty. Exceptions can be made for RB1000

series.

3. Out-of-warranty devices and devices not covered by warranty sent to Mikrotikls will be returned to the sender

at sender's cost.

RMA Instructions are located on our webpage here: http://rma.mikrotik.com

This document is provided “as is” without a warranty of any kind, expressed or implied, including, but not limited to,

the implied warranty of merchantability and fitness for a particular purpose. The manufacturer has made every effort to

ensure the accuracy of the contents of this document, however, it is possible that it may contain technical inaccura-

cies, typographical or other errors. No liability is assumed for any inaccuracy found in this publication, nor for direct or

indirect, incidental, consequential or other damages that may result from such an inaccuracy, including, but not limited

to, loss of data or profits. Please report any inaccuracies found to [email protected]

www.routerboard.com !21 Nov 20162

Federal Communication Commission Interference Statement !

(FCC ID: TV7OMNITIK5HND)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-

tial installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-

vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation. This device and its an-

tenna must not be co-located or operation in conjunction with any other antenna or transmitter.

IMPORTANT: Exposure to Radio Frequency Radiation.

5cm minimum distance has to be maintained between the antenna and the occupational user and 10

cm to general public. Under such configuration, the FCC radiation exposure limits set forth for an popu-

lation/uncontrolled environment can be satisfied.

www.routerboard.com !21 Nov 20163

CE Declaration of Conformity

Full Declaration of Conformity (DoC) may be obtained by visiting this web page: http://routerboard.com/doc/

EN. Instruction manual: Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More informa-

tion on http://wiki.mikrotik.com BG. Инструкция: Свържете адаптера на захранване, за да включите устройството. Отворете 192.168.88.1 в

уеб браузър, за да настроите продукта. Повече информация вhttp://wiki.mikrotik.com CZ. Návod k použití: Připojte napájecí adaptér k zapnutí

přístroje. Otevřete 192.168.88.1 ve webovém prohlížeči pro konfiguraci produktu. Více informací najdete v http://wiki.mikrotik.com DK. Instruk-

tionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet. Mere information i http://

wiki.mikrotik.com FR. Mode d'emploi: Connectez l'adaptateur d'alimentation pour allumer l'appareil. Ouvrez 192.168.88.1 dans un navigateur Web

pour configurer le produit. Plus d'informations dans http://wiki.mikrotik.com DE. Bedienungsanleitung: Verbinden Sie das Netzteil, um das Gerät

einzuschalten. Öffnen Sie 192.168.88.1 in einem Web-Browser, um das Produkt zu konfigurieren. Weitere Informationen im http://wiki.mikrotik.com

EE. Kasutusjuhend: Ühendage toiteadapter seadme sisselülitamiseks. Avatud 192.168.88.1 in veebilehitseja seadistada toodet. Rohkem teavet

http://wiki.mikrotik.com ES. Manual de instrucciones: Conecte el adaptador de alimentación para encender la unidad. Abra 192.168.88.1 en un

navegador web para configurar el producto. Más información en http://wiki.mikrotik.com IT. Manuale di istruzioni: Collegare l'adattatore di alimen-

tazione per accendere l'unità. Aprire 192.168.88.1 in un browser Web per configurare il prodotto. Maggiori informazioni in http://wiki.mikrotik.com

LV. Lietošanas instrukcija: Pievienojiet Strāvas adapteri, lai ieslēgtu ierīci. Atvērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu.

Plašāka informācija http://wiki.mikrotik.com LT. Naudojimosi instrukcija: Prijunkite maitinimo adapterįįjunkite įrenginį. Įinterneto naršyklę

192.168.88.1 Atidarykite galite konfigūruoti gaminį. Daugiau informacijos rasite http://wiki.mikrotik.com HU. Használati utasítás: Csatlakoztassa a

hálózati adaptert a készülék bekapcsolásához. Megnyitása 192.168.88.1 egy webböngészőben beállítani a terméket. Több információ http://wik-

i.mikrotik.com NL. Handleiding: Sluit voedingsadapter aan op het apparaat in te schakelen. Open 192.168.88.1 in een webbrowser om het product

te configureren. Meer informatie in http://wiki.mikrotik.com PL. Instrukcja obsługi: Podłącz adapter zasilania, aby włączyćurządzenie. Otwórz

192.168.88.1 w przeglądarce internetowej, aby skonfigurowaćurządzenie. Więcej informacji w http://wiki.mikrotik.com PT. Manual de instruções:

Conecte o adaptador de alimentação para ligar o aparelho. Abra 192.168.88.1 em um navegador da web para configurar o produto. Mais infor-

mações em http://wiki.mikrotik.com RO. Instrucțiuni de utilizare : Conectați adaptorul de alimentare pentru a porni aparatul. Deschide

192.168.88.1 într-un browser web pentru a configura produsul. Mai multe informații în http://wiki.mikrotik.com SK. Návod na použitie: Pripojte

napájací adaptér k zapnutiu prístroja. Otvorte 192.168.88.1 vo webovom prehliadači pre konfiguráciu produktu. Viac informácií nájdete v http://wik-

i.mikrotik.com SI. Navodila: Priključite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Večinformacij v

http://wiki.mikrotik.com FI. Käyttöohje: Kytke virtalähde päälle laitteen. Avaa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://wik-

i.mikrotik.com SE. Instruktionsmanual: Anslut nätadaptern för att slå på enheten. Öppna 192.168.88.1 i en webbläsare för att konfigurera produk-

ten. Mer information på http://wiki.mikrotik.com NO. Bruksanvisningen: Koble strømadapteren for å slå på enheten. Åpne 192.168.88.1 i en net-

tleser for å konfigurere produktet. Mer informasjon på http://wiki.mikrotik.com GR. εγχειρίδιο οδηγιών: Συνδέστε τον προσαρµογέα τροφοδοσίας

για να ενεργοποιήσετε τη µονάδα. Ανοίξτε 192.168.88.1 σε ένα πρόγραµµαπεριήγησης στο Web για να διαµορφώσετε το προϊόν. Περισσότερες

πληροφορίες στο http://wiki.mikrotik.com

[EN] English

Hereby, MIKROTĪKLS SIA declares that this ROUTERBOARD is in compliance with the essential requirements and other relevant provisions

of Directive 1999/5/EC.

[BG] Bulgarian

Снастоящето, MIKROTĪKLS SIA декларира, че ROUTERBOARD евсъответствие със съществените изисквания идругитеприложими

разпоредби на Директива 1999/5/EC.

[CZ] Czech

MIKROTĪKLS SIA tímto prohlašuje, že ROUTERBOARD splňuje základní požadavky a všechna příslušná ustanoveni Směrnice 1999/5/ES.

[DK] Danish

Undertegnede MIKROTĪKLS SIA erklærer herved, at følgende udstyr ROUTERBOARD overholder de væsentlige krav og øvrige relevante

krav i direktiv 1999/5/EF.

[DE] German

Hiermit erklärt MIKROTĪKLS SIA dass sich das Gerät ROUTERBOARD in Übereinstimmung mit den grundlegenden Anforderungen und den

übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

[EE] Estonian

Käesolevaga kinnitab MIKROTĪKLS SIA seadme ROUTERBOARD vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tu-

lenevatele teistele asjakohastele sätetele.

[GR] Greek

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ ΟΚΑΤΑΣΚΕΥΑΣΤΗΣ MIKROTĪKLS SIA ΔΗΛΩΝΕΙ ΟΤΙ ROUTERBOARD ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ

ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ

[ES] Spanish

Por la presente, MIKROTĪKLS SIA declara que este ROUTERBOARD cumple con los requisitos esenciales y otras exigencias relevantes de la

Directiva 1999/5/EC.

[IT] Italian

Con la presente MIKROTĪKLS SIA dichiara che questo ROUTERBOARD è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti

stabilite dalla direttiva 1999/5/CE.

[LV] Latvian

Ar šo MIKROTĪKLS SIA deklarē, ka ROUTERBOARD atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteiku-

miem.

[LT] Lithuanian

Šiuo MIKROTĪKLS SIA deklaruoja, kad šis ROUTERBOARD atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas

[HU] Hungarian

A MIKROTĪKLS SIA ezzennel kijelenti, hogy a ROUTERBOARD típusú beren-dezés teljesíti az alapvetőkövetelményeket és más 1999/5/EK

irányelvben meghatározott vonatkozó rendelkezéseket.

[NL] Dutch

Hierbij verklaart MIKROTĪKLS SIA dat het toestel l ROUTERBOARD in overeenstemming is met de essentiële eisen en de andere relevante

bepalin-gen van richtlijn 1999/5/EG.

[PL] Polish

Niniejszym MIKROTĪKLS SIA deklaruje że ROUTERBOARD jest zgodny z zasadniczymi wymaganiami i innymi właściwymi postanowieniami

Dyrektywy 1999/5/EC.

[PT] Portuguese

Eu, MIKROTĪKLS SIA declaro que o ROUTERBOARD cumpre os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.

[RO] Romanian

Prin prezenta, MIKROTĪKLS SIA declarăcăaparatul ROUTERBOARD este în conformitate cu cerinţele esenţiale şi cu alte prevederi perti-

nente ale Directivei 1999/5/CE..

[SK] Slovak

MIKROTĪKLS SIA týmto vyhlasuje, že ROUTERBOARD spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

[SI] Slovenian

MIKROTĪKLS SIA izjavlja, da je ta ROUTERBOARD v skladu z bistvenimi zahtevami in drugimi relevantnimi določili direktive 1999/5/ES.

[FI] Finish

MIKROTĪKLS SIA vakuuttaa täten että ROUTERBOARD tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien

direktiivin muiden ehtojen mukainen.

[SE] Swedish

Härmed intygar MIKROTĪKLS SIA att denna RouterBOARD är i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv 1999/5/EG.

[NO] Norwegian

MIKROTĪKLS SIA Erklærer herved at ROUTERBOARD er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

www.routerboard.com !21 Nov 20164

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MikroTik Drahtloser Zugangspunkt Handbücher

MikroTik

MikroTik RBD25G-5HPacQD2HPnD Bedienungsanleitung

MikroTik

MikroTik RouterBOARD 911 Series Bedienungsanleitung

MikroTik

MikroTik RBLtAP-2HnD&R11e-LTE&R11e-LR8 Bedienungsanleitung

MikroTik

MikroTik LtAP LR8 LTE kit Bedienungsanleitung

MikroTik

MikroTik Audience Bedienungsanleitung

MikroTik

MikroTik cAP Leitfaden

MikroTik

MikroTik hAP ac Bedienungsanleitung

MikroTik

MikroTik wAP ac Series Bedienungsanleitung

MikroTik

MikroTik LHG Series Bedienungsanleitung

MikroTik

MikroTik NetMetal 5 triple Bedienungsanleitung

MikroTik

MikroTik RouterBOARD Groove 52HPn Bedienungsanleitung

MikroTik

MikroTik RouterBOARD wAP R Bedienungsanleitung

MikroTik

MikroTik hAP ac2 Bedienungsanleitung

MikroTik

MikroTik Cube 60G ac Bedienungsanleitung

MikroTik

MikroTik LHG 60G Bedienungsanleitung

MikroTik

MikroTik mAP 2nD Bedienungsanleitung

MikroTik

MikroTik RBLHGGR&R11e-LTE6 Bedienungsanleitung

MikroTik

MikroTik LHG XL 52 ac Bedienungsanleitung

MikroTik

MikroTik LHG 2 Bedienungsanleitung

MikroTik

MikroTik Wireless Wire Cube Bedienungsanleitung

MikroTik

MikroTik RBcAPGi-5acD2nD Bedienungsanleitung

MikroTik

MikroTik hAP ac3 LTE6 kit Bedienungsanleitung

MikroTik

MikroTik Chateau LTE6-US Bedienungsanleitung

MikroTik

MikroTik RouterBOARD Groove 5Hn Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung