MileSeey R2B Bedienungsanleitung

R2B User Manual

Product Overview

Thank you for purchasing and using MileSeey

handheld laser distance meter, please read

the manual carefully before using.

Mileseey product model R2B is a handheld

Laser Distance Meter integrated with

measuring wheel and laser level.

Thanks to robust housing, compact inner

structure,R2B offers the perfect features of

IP65 waterproof, drop-resistance and super

long lifespan. With 2.4 inch HD colored

display, it enables user to read the data

easily.

Adopting the most cutting-edge technologies

of 3D measurement, curve measurement,

angle marking function, R2B solved a variety

of difﬁculties for all users.

R2B has 15 functions to satisfy different

measuring needs and greatly improved

user experience.

11 12

Battery installation and using instructions

Laser Distance Meter

Safety Instructions

The device is categorized into Class 2 laser

product. DO NOT stare at laser directly or

shoot at others or it will cause damage to

eyes.

The product is in accordance with strict

standards and regulations through the

development and manufacturing, but still

can’t entirely exclude the possibility of

interference to other devices, may cause

discomfort to human and animals.

Please DO NOT use this product under

explosive or corrosive environment.

Please DO NOT use this product near

medical devices.

Warning

Please DO NOT use this product on the

plane.

For the safe use of this handheld laser

distance meter, please read below instructions

carefully.

Press the battery cover and slide down to

unlock it ﬁrst, then uplift it to open. (The

battery cover is tight for waterproof purpose,

please open it with some strength)

1. Measuring Button

Short press to measure/conﬁrm.

Long press to continuous measurement mode

2. Function Button

Press this button to function menu, select

functions by up and down key, press measure

button to conﬁrm.

3. Setup, Turn on/off laser level Button

Short press to setup menu, select setup options

by up and down key, press measure button to

conﬁrm.

4. Wheel Measurement Button

Short press to turn on/off wheel measurement

5. Up/Add Button

Press this button to page up/Add

6.ON/OFF/Return Button

Long press to turn on/off, short press to

return to Single measurement

After the battery is placed, cover and hold the

battery door, press and slide to the top, the

cover can be sealed.

Insert 3* AAA rechargeable batteries,Ni-MH

observing correct polarity.

if the equipment is used in a manner not

speciﬁed by the manufacturer, the protection

provided by the equipment may be impaired.

The standard batteries are 3 pieces of AAA

NI-MH rechargeable batteries, common dry

batteries are workable (Do not charge

non-rechargeable batteries). Charge the NI-MH

batteries by connecting the charging port and

adapter or PC with the USB-C cable.

Warning: ①Do not charge non-rechargeable

batteries to avoid any accidents. ②Do not use

rechargeable batteries and non-rechargeable

batteries at the same time to avoid any

accidents. MileSeey will not be responsible for

accident due to charging dry batteries.

Laser distance meter may heat up when

charging, it's normal, has no effect on the

device performance and service life. If it is not

used for a long time, remove the batteries and

keep it in dry place.

Appearance

Warning:

Do not use aggressive cleaning agents or

solutions. Use only a clean, soft cloth for

cleaning.

FCC Statements:

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy. However,

there is no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference to

radio or reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

1,Disposal

Everyone is responsible for environmental

protection.

It’s prohibited to dispose used batteries

together with household waste, please

collect used batteries to designated waste

station.

This product must not be recycled with

household waste. Dispose of the product

appropriately in accordance with the national

regulations in your country.

2,Scope of Responsibility

MileSeey will not be responsible for the

damages caused by improper use below:

*Using the product without instruction;

*Use of accessories from other

manufacturers without approval from

MileSeey ;

*Carrying out modiﬁcation or conversion

of the product.

• Consult the dealer or an experienced

technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful

interference, and

2) This device must accept any interference

received, including interference that my cause

undesired operation.

MODIFICATION: Any changes or modifications

not expressly approved by the grantee of this

device could void the user’s authority to operate

the device.

Wheel Measurement

Single/Continuous Measurement

Area Measurement

Volume

MEAS

Pythagoras (2-point)

7. Send data by Bluetooh / Historical record

Short press to turn on Bluetooth (manually)/

transfer data to App.

Long press to check historical record

8. Down/Subtract Button

Press this button to page down/subtract

9. Wheel

In wheel measurement mode, move the

wheel along the measuring path to measure

distance.

12. Tripod Screw Hole

13. Laser Line Emitting Hole

11. Battery Compartment

Notes: Each time when turning on wheel

measuring, ﬁrst direction that wheel

measured is calculated as positive data,

the opposite direction measured is

calculated as negative.

10. USB-C Port

Instruction for icons

Pythagoras (3-point)②

Auto level

Auto height

Pythagoras (3-point)①

Trapezoid measurement①

Trapezoid measurement②

3D measuring: P2P

Laser Line Marking Function

Setup menu explanation

①Bluetooth

Short press to switch on Bluetooth (automatically

/manually), and turn off Bluetooth.

Bluetooth (Automatic mode), measured

data will be transfered to App automatically.

Bluetooth (Manual mode), measured date

will be transferred to the App by pressing

manually.

When the icon turns gray, Bluetooth is off.

④

⑤ ⑥

① ② ③

⑦

② Measuring units

Short press to switch measuring units between

m/ft/in/ft+in

③Reference

Short press to change measuring reference

⑥Chinese/English Voice broadcast.

Short press to select Chinese/English voice

broadcast.

⑤Rotary screen settings

Short press to activate/de-activate the screen

rotary settings for Portrait & Landscape view

(only available in Single/Continuous

measurement)

⑦Voice

Short press to turn the Voice Broadcast ON/OFF.

④Digital Level

Press to activate d , the electronicigital level

tilt sensor makes it easier to achieve horizontal

alignment with the real-time measuring angle.

Triangle Area Measurement

Operation Instructions

The device will enter Single distance

measurement mode when it is powered ON,

short press to select measuring mode, the

reminding of the red ﬂashing line shows the

line to be measured.

※The measuring data should be different due

to different Reference settings. The Rear is

the default reference.

Front Tripod Rear

It can be used to measure the diagonal of

the house, horizontal lines, and stake out

purposes.

Long press to activate Continuous

measurement, aiming at the target and

press to stop, the Minimum and

Maximum data will be displayed

accordingly.

※The continuous measurement will stop

automatically after 5 minutes.

Continuous Measurement

Single Distance Measurement

The device will enter Single distance

measurement mode when it is powered ON,

press after aiming at target to get result

at bottom of the screen.

Interface

Measuring mode

display

Measuring

reference

Bluetooth

Angle display

Battery status

A Measuring interface：

Digital tilt

display

To be

measured line

B Measuring data interface：

Measuring mode

display

Measuring

reference

Bluetooth

Angle display

Battery status

Digital tilt

display

Final result display

First line display

Second line display

Third line display

Measuring

sequence

number

Measuring

sequence

number

Power on the device, measure in the

certain distance within ±2mm accuracy, it

can work properly.

Press to select Area measurement ,

according to the red ﬂashing line, press

to get the ① distance (Length) from the target

point, press again to get ② distance(Width)

from the second target point, Area will be

calculated and displayed accordingly.

Area Measurement

Volume Measurement

Press to select Volume measurement ,

according to the red ﬂashing line, press to

get ① distance (Length) from the target point,

press again to get ② distance (Width) from

the second target point, press the third time

to get ③ distance (Height), the Volume will be

calculated and displayed accordingly.

Press to activate wheel measurement,

scroll the wheel from the start point to

end point, press to stop.

※The wheel measurement can be used in

Single measurement, Area measurement

and Volume measurement.

Note: When starting the wheel measurement,

please keep an eye on right direction of the

wheel.

Wheel Measurement

MEAS

0.513

0.428

0.445

0.458

5.088

5.104

25.969

Tips for Pythagorean Measurement

All Pythagoras measurement can be

applied to different directions of applications ,

only to ensure that the right-angle side is

perpendicular to the measured object.

Note: According to the Pythagorean

Theorem, the right-angle side cannot be

greater than the hypotenuse; otherwise

there is a calculation error.

Pythagoras (2-point)

3.507

3.728

2.998

39.196

3.507

Press to select Pythagoras (2-point) ,

according to the red ﬂashing line, press to

Pythagoras (3-point)②

Pythagoras (3-point)①

Press to select Pythagoras (3-point)①

, according to the red ﬂashing line,

press to get the hypotenuse①from the

ﬁrst target point, rotate around the center of

the Reference to the direction perpendicular

to the measurement target, press to get

distance of vertical edge②, rotate a second

time by the same baseline and target at the

third point, press to get the second

hypotenuse③, the distance between the ﬁrst

and third point L will be calculated and

displayed accordingly.

Press to select Pythagoras (3-point)②

,according to the red ﬂashing line,

press to get the hypotenuse ①from the

ﬁrst target point, rotate around the center

of the Reference to aim at second target

point, press to get ②hypotenuse, rotate

the second time by the same baseline to the

direction perpendicular to the measurement

target, press to get ③ distance of vertical

edge, the distance tween the ﬁrst and

second point L will be calculated and

displayed accordingly.

Auto Level

Press to Auto level ,according to

the red ﬂashing line, aiming at ﬁrst target

point, press to get the angle between

hypotenuse and horizontal edge,

hypotenuse ①,vertical length ②and

horizontal length L, all the data will be

displayed at bottom of the screen.

11.926

8.038

8.810

11.926

7.872

5.130

6.404

9.804

7.872

get the hypotenuse ① from the ﬁrst target

point, rotate around the center of the

Reference to the direction perpendicular to

the measurement target, press to get

distance of vertical edge ②, the second

distance of vertical edge L will be calculated

and displayed accordingly.

7.550

5.403

4.262

2.911

7.550

Auto Height

Press to Auto height ,according to the

red ﬂashing line, aiming at ﬁrst target point,

press to get hypotenuse ①, rotate around

the center of the Reference to aim at second

target point, press to get hypotenuse②,

the angle between two hypotenuses, the length

of ①②, vertical length H , all the data will be

displayed at bottom of the screen.

Point-to-Point (P2P) Measurement

Press to Point-to-Point Measurement

,a message“please wait....”shows up,

please keep the device still until the message

disappear. According to the red ﬂashing line,

aiming at the ﬁrst target point, press to get

the distance① from the ﬁrst target point; rotate

around the center of the Reference, aiming at

the second target point, press to get the

distance②,the angle between two hypotenuses,

the length of ①② and the distance between

these two points are displayed on the screen

orderly.

Note: if calibration fails, please return and

recalibrate.

Trapezoid measurement 1

Press to select Trapezoid Measurement ①

, according to the red ﬂashing line, aiming

at the ﬁrst target point, press to get the

ﬁrst right-angle length①;aiming at the second

target point, press to get the second

right-angle length②;aiming at the third target

point, press to get the third right-angle

length③,the calculated length of the forth

hypotenuse is displayed on the screen.

39.8

5.246

3.358

4.030

5.246

60.0

6.540

60.0

α°

1.8

11.749

5.160

6.593

11.749

4.934

2.578

7.634

3.733

4.934

Under the mode of Single distance, Area,

Volume measurement, after get the ﬁrst

measuring result, press the Add or Subtract

button to make add/subtract calculations on

the basis of previous and current record, the

result is displayed on the screen.

Add/Subtract Function

Triangular Area Measurement

Press to select Triangular area

measurement , according to the red

ﬂashing line, press to measure three

lines of the triangle ①②③, the triangular

area will be calculated and displayed orderly.

Laser Line Marking Function

Short press to enter the Laser Line

Marking Function, mark the red laser line on

the target, the real-time angle of laser line is

displayed on the screen, and it varies with

the angle of device.

2.903

2.085

1.735

1.789

2.903

Trapezoid measurement 2

Press to select Trapezoid Measurement

② , according to the red ﬂashing line,

aiming at the ﬁrst target point, press to get

the ﬁrst right-angle length ①；aiming at the

second target point, press to get the

second diagonal length②; the angle between

diagonal and horizontal line, the length of ﬁrst

right-angle①, the length of diagonal②and the

length of hypotenuse are displayed on the

screen.

12.6

4.340

11.313

11.198

4.340

Note:

1. When you're using "line-laser" function,

please keep the left side surface (the same

side as line-laser) of the device parallel to the

Measuring Range(m)

Triangular Area

Measurement

Pythagoras (3-point) ①

Trapezoid

Measurement ①

0.2-40/60/80/100

-5

±(2.0mm+5x10 D)

√

Speciﬁcation

Measuring

accuracy

Continuous

Measurement

Area Measurement

√

Pythagoras (2-point) √

Pythagoras (3-point) ②√

Auto Height √

Bluetooth 4.0

Auto Level √

Rotary screen

Single Distance

Measurement

5‰

Volume

Measurement √

2.4 inch HD colored

±(0.3°+0.1°+0.01*D)

Wheel Measurement

Accuracy

Trapezoid

Measurement ②

Point to Point (P2P)

Measurement

Laser Line Marking

Function √

Add/Subtract √

Tilt Sensor

Tilt Accuracy

√

screen

Display Screen

Wheel Measurement √

2. The angle of the laser line displayed on

screen is not absolutely accurate, because of

environment and inevitable and slight improper

operation. The angle is for reference only. If you

need highly accurate laser line, please use

more accurate angle measuring tools.

Top

Figure A

Front

0°

30°

60°-60°

-30°

30°-30°

-60°60°

0°

Figure B

wall, the angle of the line to horizon is

displayed on screen(Figure A). Head up and

head down the device, to project the line at

different angles.(Figure B)

Do not turn the head of the device left or right,

or it will cause incorrect angle readings.

Trouble shooting

All information will be showed as code or

“Error”, the following are all codes and

corresponding explain and solution.

Andriod APP

IOS APP

Refer to user manual,

repeat the procedures.

255

256

Calculation error

Received signal

too weak or

measurement

time too long

Received signal

too strong.

Out of measuring

range

204

Measuring the distance

within measurement

range.

Code Cause Corrective Measure

220 Low battery Replace batteries or

charge the batteries

Hardware error

Switch on/off the device,

if the symbol still

appears after several

times, please contact

with your dealer.

261

500

Improve the reﬂective

surface. (Use target

plate, or don't aim at

strong light)

Improve the reﬂective

surface. (Use target

plate, white paper)

Class 2

Laser Type 630-670nm,＜1mW

Memory

Auto Power off

Protection Class

m / ft / in / ft+in

Front/Tripod/Rear

50 values

After 180s of inactivity

Measuring Unit

Laser Class

IP65

Measuring Reference

Voice Broadcast Chinese/English

BPI AAA 800

(NI-MH rechargeable battery)

3*AAA alkraine battery powered

Battery Type

Charging Interface

Storage Temperature

Altitude up to 2000m

Humidity 0-95%

Size(mm) 137x55x26

-20℃~70℃(-4°F~158°F)

Operating

Temperature

Weight(g) 132

0℃~+40℃(32°F~+104°F)

USB-C

4. Tilt Accuracy

0.1°is caused by temperature, D is +/- 0~45°, eg: at normal

temperature the accuracy is +/-0.3° at angle of 0°，at

abnormal temperature the accuracy is +/-0.85°at angle of 45°.

1. Measuring Range

The Rear is the default reference. The maximum range shall

be different according to different models. The actual range

refers to the package.

Measuring Accuracy (“D” is the measured length)2.

If measuring under favorable conditions, such as smooth

surface, proper temperature and indoor lighting, the device

is able to work within certain range as indicated.

Maximum deviation occurs under unfavorable conditions

such as bright sunlight or when measuring to poorly reﬂecting

or very rough surfaces.

Tips: In case of bright sunlight and bad reﬂection of the object,

please use the target plate or reﬂector.

3.Wheel Measurement Accuracy

Note: Please keep the device moving smoothly while

measuring,

Mileseey Pro APP Download

The product speciﬁcations are subject to

change without notice, all ﬁnal interpretation

rights were reserved by Mileseey Technology

Co., Ltd. All trademarks, product images,

technical parameters are properties of

Mileseey Technology Co., Ltd. All rights

reserved.

Copyrights

Fax: +86 755 86701592

Email: info@mileseey.net

Shenzhen Mileseey Technology Co., LTD.

Telephone: +86 755 86329055

Website: www.mileseey.net

Add.: 6/F, Building 9,

Zhongguan Honghualing

Industrial South Park II, 1213

Liuxian Ave, Taoyuan Street, Nanshan District,

Shenzhen, 518055, P.R. China.

Model name

Date of purchase

User Info

User Name

Address &Tel.

warranty period

Dealer

Dealer’s name, address, tel.

Serial Number

Fault

Description

Invoice Code

Warranty Card

Warranty period

This laser distance meter has two years warranty in the

precondition of non-artiﬁcial damage.

Within the warranty period, certain maintenance

costs will be charged under following cases

Damages caused by improper usage or maintenance of the

tool;

The tool had been disassembled or mended by

non-authorized third party;

Without the warranty card or the purchase invoice;

The serial number on the warranty card is different with the

one on product;

The serial number has been altered or abraded;

Damaged by any force majeure factors;

Replacement of the worn out accessories；

Damages caused by the abnormal factors such as the

temperature/humidity in usage;

Damages caused by the improper operation.

Please send the tool with warranty card &

purchase invoice to local dealer if maintenance

needed. The warranty card will not be reissued

if lost; please keep it carefully for maintenance.

Warranty Terms

Andere MileSeey Messgerät Handbücher

MileSeey

MileSeey P7 Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung