MIMSAL LS Bedienungsanleitung

ENG

USER MANUAL

EXAMINATION LAMP

LS LED | LS INFRA | LS INFRA TIMER

F3P34

Rev. 01

20.06.2022

ENG

Dear user, we encourage you to read this manual carefully before using the product.

The manufacturer states that this product complies with the following directives:

• 2014/35/EU (LVD) Low Voltage Directive Class II

• 2014/30/EU Electromagnetic Compatibility (E.M.C)

This manual’s content may be modiﬁed in part or in whole by MISMAL without prior notice in

order to make changes and improvements.

MIMSAL has a Customer Support service available.

Your team:

MIMSAL TRADE S.L.

C/ Mollet, 17

Polígono Industrial Palou Nord

08401 – Granollers (Barcelona) SPAIN

Tel. +34 930 139 860

mimsal@mimsal com

www.mimsal.com

ENG

TABLE OF CONTENTS

1.Safety instructions 5

2. Brief description 6

3. Installation and supports 7

3.1 Trolley Stand 8

3.2 AH Table Clamp 9

3.3 Wall B Support 10

3.4 Rail Plus Bracket 11

3.5 Extension arm 12

4. Operation of the lighting unit 13

4.1 Check before each use 13

4.2 Operation of the lighting unit head 13

4.3 Articulated arms measurement details 13

5. Safety functions 14

5.1 Voltage drop 14

5.2 Power cuts 14

5.3 Electrical malfunction 14

6. Cleaning/Disinfection 14

6.1 General safety instructions 14

6.2 Cleaning 14

6.3 Disinfection 15

7. Maintenance 15

7.1 Lighting unit support arms 15

7.2 Lighting unit head 16

7.3 Repairs 16

7.4 Adjustments 16

7.5 Troubleshooting 16

8. Recycling 16

9. Technical data 17

10. Electromagnetic Emissions 18

11. Warranty 19

12. Industrial and Intellectual Property 20

13. Conﬁdentiality 20

14. Declaration of Conformity 21

15. Certiﬁcate ISO 9001 23

ENG

SYMBOLS

INSTRUCTIONS

DECLARATION OF CONFORMITY

ITEM CODE

BATCH NUMBER

MANUFACTURING DATE

NAME AND ADDRESS OF THE MANUFACTURER

ELECTRONIC WASTE RECYCLING

ELECTRICAL INSULATION CLASS

Class II

MINIMUM DISTANCE TO THE ILLUMINATED OBJECT

AMBIENT TEMPERATURE

Shows the permitted ambient temperature of between -25°C and 70°C for transportation and

storage.

HUMIDITY

Shows the permitted humidity values of between 10% and 75% for transportation and storage.

WARNING

Not doing so could result in serious or even fatal injuries.

CAUTION

Not doing so could result in minor to moderate injuries or damage.

NOTE | INFORMATION

Provides application tips and useful information.

FALLING OF THE LIGHTING UNIT

Warns about the sudden collapse of the support arm system if the maximum useful load is

exceeded.

TIPPING HAZARD

The brackets are only designed to support the weight of the head. If additional weight is added, the

unit may tip over, which could cause damage of varying degrees.

SAFETY RULES

ENG

1. SAFETY INSTRUCTIONS

REFERENCE AND MODEL

REF MODEL

LS010316LED LS LED

E020412 LS INFRA 150W

E02041250 LS INFRA 250W

E020412T LS INFRA TIMER 150W

E02041250T LS INFRA TIMER 250W

ENVIRONMENT

1. This device is not designed to be operated in potentially explosive areas!

2. Do not use it in oxygen-enriched areas!

3. Do not use it near ﬂammable anesthetic gases!

4. Do not place it close to strong magnetic ﬁelds! e.g. Magnetic resonance systems.

5. Do not cover the top of the lamp head! Risk of overheating!

ELECTRONIC SAFETY

1. Only use the built-in power source unit!

2. The lighting unit does not include a fail-safe power source or an emergency battery!

3. In the event of a power cut, the lighting unit will shut off completely!

4. Short black-outs are possible in the event of external EMC interference!

5. To switch off the lamp completely, the power plug must be removed from the outlet or the

live outlet must be disabled using a separate switch.

MAINTENANCE AND RESPONSABILITY

1. Installation and electrical maintenance work must only be carried out by qualiﬁed personnel!

2. The manufacturer is not responsible for any damage caused by improper use!

3. The ﬁnal user is responsible for the product’s installation and MIMSAL accepts no responsibility.

4. The manufacturer is responsible for the safety of the lamp only if repairs and modiﬁcations are

carried out by the manufacturer itself or by a company that ensures compliance with safety

rules, using original replacement parts!

Prior to each use, make sure that the lamp is in perfect technical condition.

Check the operating instructions when handling the device.

ENG

2. BRIEF DESCRIPTION

INTENDED USERS

These operating instructions are intended for the users who use, clean, and disinfect MISMAL

lighting units.

INTENDED USE

This lighting unit is intended for carrying out very meticulous work that requires a high degree

of precision and good lighting.

INDICATION

The light is only used to provide optimal visibility of the surface under examination. The light is

external to the body and the device never enters into contact with users.

CONTRAINDICATION

The products must not be used close to strong magnetic ﬁelds.

The device must not be used in oxygen-enriched environments or in close to ﬂammable

anesthetic gases.

RESIDUAL RISKS – RISK IN THE EVENT OF DAMAGE TO THE LIGHTING UNIT

Protect the lighting unit from knocks. Collision with other objects could result in the failure of

the device and/or damage to the cover and the support arm system, causing parts to fall off.

The lighting unit does not include a fail-safe power source. A power cut will cause the device

to switch off.

Do not aim the light source directly at the eyes of the user.

Always properly protect the user’s eyes.

Failing to comply with these precautions could cause blinding and damage to the retina.

Never place and/or hang any object on the lighting unit. If this precaution is not taken, the unit’s

position will be unstable and these objects could fall onto the work area.

Never hang the body weight of a person from the lighting unit. Failing to comply with this

precaution could damage the structure of the device.

ENG

3. INSTALLATION AND SUPPORTS

Before starting to install the device, check that the content is in good condition and that it has

not been damaged or degraded during transportation.

Claims will only be accepted if the vendor or the carrier is notiﬁed immediately. All claims must

be made in writing.

The goods always travel under the buyer’s responsibility and at the buyer’s risk.

Keep the original packaging in the event the product needs to be returned.

TYPES OF SUPPORT

The lighting unit may come with several different types of brackets, allowing the most suitable

one to be selected for its use.

All accessories must be assembled by an authorized installer.

Do not make any modiﬁcations to the product, other than those mentioned in this user manual.

MODEL SUPPORT

TROLLEY STAND Rolling base with 5 wheels

AH TABLE CLAMP Table clamp

WALL B SUPPORT Reinforced wall B bracket

RAIL PLUS BRACKET Bracket for mounting on an ICU rail

EXTENSION ARM Extension arm + Reinforced wall B bracket

ENG

3u. 4,0 Kg

1u. 8,8 Kg

Allen n. 2

3.1 TROLLEY STAND

REF MODEL DESCRIPTION

09655 TROLLEY STAND 4 Kg 4 Kg rolling base

09651 TROLLEY STAND 8,8 Kg 8.8 Kg rolling base

1. Installation and assembly

- Insert piece (2) totally into the base (3) and press down.

- Insert the legs with the wheels (4) through the base slot (3) until it completely ﬁts, and if

necessary helping with a nylon hammer.

- Fit piece 5 into the interior leg slots (4) by pressing down.

- Put the screw (7) through the washer (6) and insert the screw into piece 5 to connect the set.

- Join the pole (1) directly with the screw (7) without

tightening the pole (1) with the piece (2) so as not to

damage the paint.

- Hold the pole (1) ﬁrmly and turn the screw (7) with a

wrench or a scanner until the whole set is tight.

- Luminaries ﬁxation system (8). Allen number 2.

2. Technical characteristics

- Length of pole: 75 cm

- Total length: 92 cm

- Base diameter: 60 cm

- Wheel diameter: 50 mm

- Number of wheels: 5

- Number of brakes: 3

Install the accessory without the lighting unit installed on it.

It is the customer’s responsibility to ensure that the surface that it is attached to is

secure and sufﬁciently strong.

The rolling base is only designed to support the weight of the lighting unit. If additional

weight is added, the unit may tip over and cause damage to the lighting unit and/or

injury to the user.

Check regularly that the unit is still stable in order to avoid the possibility of the

lighting unit falling down.

ENG

3.2 AH TABLE CLAMP

REF MODEL DESCRIPTION

B010190 AH TABLE CLAMP Table clamp

Installation and assembly

- Use the handle to loosen the adjustment screw (1).

- Rest the base of the clamp on the surface of the table (2).

- Adjust the body of the clamp (3) until it is touching the edge of the table.

- Turn the handle (4) until the clamp and the table are ﬁrmly attached.

- Once the clamp is ﬁxed and secure, position the lamp through the upper hole (5).

Install the accessory without the lighting unit installed on it.

It is the customer’s responsibility to ensure that the surface that it is attached to is

secure and sufﬁciently strong.

The bracket is only designed to support the weight of the lamp. If additional weight is

added, this may cause damage to the lighting unit and/or injury to the user.

Check regularly that the unit is still stable in order to avoid the possibility of the

lighting unit falling down.

ENG

3.3 WALL B SUPPORT

REF MODEL DESCRIPTION

B0101800 WALL B SUPPORT Reinforced wall B bracket. 7 cm shaft-wall separation.

Installation and assembly

- Check that the wall is sufﬁciently hard-wearing and ﬂat.

- Use the bracket to mark the holes on the wall with the help of a pencil (1).

- Drill holes and put the plugs into the wall (1).

- Position the wall support, lining it up with the location of the holes (2).

- Tighten the screws until the assembly, the guide separator and the screw are ﬁrmly attached

(2).

- Once the support is ﬁxed and secure, position the lamp through the upper hole (3).

Install the accessory without the lighting unit installed on it.

It is the customer’s responsibility to ensure that the surface that it is attached to is

secure and sufﬁciently strong.

The bracket is only designed to support the weight of the lamp. If additional weight is

added, this may cause damage to the lighting unit and/or injury to the user.

Check regularly that the unit is still stable in order to avoid the possibility of the

lighting unit falling down.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MIMSAL Außenleuchte Handbücher

MIMSAL

MIMSAL MS Bedienungsanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung