Minolta MS6000 MK II Bedienungsanleitung

0820-7724-02 K

0820-7724-02 2008.10

2008 KYOKKO SEIKO CO., LTD.

MS6000 MKII

User’s Guide

Hyou2.fm 1 ページ２００８年３月１３日　木曜日　午後２時３８分

P-i

SAFETY INFORMATION

This section contains detailed instructions on the operation and maintenance of this

machine. To achieve optimum utility of this device, all operators should carefully

read and follow the instructions in this manual. Please keep this manual in a handy

place near the machine.

Make sure you observe all of the precautions listed in this manual.

*Ver07

Please note that some parts of the contents of this section may not correspond with the purchased product.

Warning and Precaution Symbols

Ignoring this warning could cause serious injury or

even death.

Ignoring this caution could cause injury or damage

to property.

Meaning of Symbols

A triangle indicates a danger against which you should take precaution.

This symbol warns against cause burns.

A diagonal line indicates a prohibited course of action.

This symbol warns against dismantling the device.

A black circle indicates an imperative course of action.

This symbol indicates you must unplug the device.

SAFETY INFORMATION

P-ii

• Do not modify this product, as a fire, electrical shock, or break-

down could result. If the product employs a laser, the laser beam

source could cause blindness.

• Do not attempt to remove the covers and panels which have been

fixed to the product. Some products have a high-voltage part or a

laser beam source inside that could cause an electrical shock or

blindness.

• Only use the power cord supplied in the package. If a power cord

is not supplied, only use the power cord and plug that is specified

in POWER CORD INSTRUCTION. Failure to use this cord could

result in a fire or electrical shock.

• Use the power cord supplied in the package only for this machine

and NEVER use it for any other product. Failure to observe this

precaution could result in a fire or electrical shock.

• Use only the specified power source voltage. Failure to do that

could result in a fire or electrical shock.

• Do not use a multiple outlet adapter to connect any other appli-

ances or machines. Use of a power outlet for more than the

marked current value could result in a fire or electrical shock.

Do not unplug and plug in the power cord with a wet hand, as an

electrical shock could result.

Plug the power cord all the way into the power outlet. Failure to do

this could result in a fire or electrical shock.

• Do not scratch, abrade, place a heavy object on, heat, twist, bend,

pull on, or damage the power cord. Use of a damaged power cord

(exposed core wire, broken wire, etc.) could result in a fire or

breakdown.

Should any of these conditions be found, immediately turn OFF

the power switch, unplug the power cord from the power outlet,

and then call your authorized service representative.

• Do not use an extension cord, in principle. Use of an extension

cord could cause a fire or electrical shock. Contact your autho-

rized service representative if an extension cord is required.

SAFETY INFORMATION

P-iii

Do not place a flower vase or other container that contains water, or

metal clips or other small metallic objects on this product. Spilled

water or metallic objects dropped inside the product could result in a

fire, electrical shock, or breakdown.

Should a piece of metal, water, or any other similar foreign matter

get inside the product, immediately turn OFF the power switch,

unplug the power cord from the power outlet, and then call your

authorized service representative.

• Do not keep using this product, if this product becomes inordi-

nately hot or emits smoke, or unusual odor or noise. Immediately

turn OFF the power switch, unplug the power cord from the power

outlet, and then call your authorized service representative. If you

keep on using it as is, a fire or electrical shock could result.

• Do not keep using this product, if this product has been dropped

or its cover damaged. Immediately turn OFF the power switch,

unplug the power cord from the power outlet, and then call your

authorized service representative. If you keep on using it as is, a

fire or electrical shock could result.

Do not throw the toner cartridge or toner into an open flame. The hot

toner may scatter and cause burns or other damage.

Connect the power cord to an electrical outlet that is equipped with a

grounding terminal.

• Do not use flammable sprays, liquids, or gases near this product,

as a fire could result.

• Do not leave a toner unit or drum unit in a place within easy reach

of children. Licking or ingesting any of these things could injure

your health.

• Do not let any object plug the ventilation holes of this product.

Heat could accumulate inside the product, resulting in a fire or

malfunction.

• Do not install this product at a site that is exposed to direct sun-

light, or near an air conditioner or heating apparatus. The resultant

temperature changes inside the product could cause a malfunc-

tion, fire, or electrical shock.

• Do not place the product in a dusty place, or a site exposed to

soot or steam, near a kitchen table, bath, or a humidifier. A fire,

electrical shock, or breakdown could result.

• Do not place this product on an unstable or tilted bench, or in a

location subject to a lot of vibration and shock. It could drop or fall,

causing personal injury or mechanical breakdown.

• After installing this product, mount it on a secure base. If the unit

moves or falls, it may cause personal injury.

• Do not store toner units and PC drum units near a floppy disk or

watch that are susceptible to magnetism. They could cause these

products to malfunction.

The inside of this product has areas subject to high temperature,

which may cause burns. When checking the inside of the unit for

malfunctions such as a paper misfeed, do not touch the locations

(around the fusing unit, etc.) which are indicated by a “CAUTION

HOT” caution label.

Do not place any objects around the power plug as the power plug

may be difficult to pull out when an emergency occurs.

The socket-outlet shall be installed near the machine and shall be

easily accessible as the power plug may be difficult to pull out when

an emergency occurs.

SAFETY INFORMATION

P-iv

• Always use this product in a well ventilated location. Operating the

product in a poorly ventilated room for an extended period of time

could injure your health. Ventilate the room at regular intervals.

• Whenever moving this product, be sure to disconnect the power

cord and other cables. Failure to do this could damage the cord or

cable, resulting in a fire, electrical shock, or breakdown.

• When moving this product, always hold it by the locations speci-

fied in the operator’s manual or other documents. If the unit falls it

may cause severe personal injury. The product may also be dam-

aged or malfunction.

• Remove the power plug from the outlet more than one time a year

and clean the area between the plug terminals. Dust that accumu-

lates between the plug terminals may cause a fire.

• When unplugging the power cord, be sure to hold onto the plug.

Pulling on the power cord could damage the cord, resulting in a

fire or electrical shock.

SAFETY INFORMATION

P-v

Precautions for Routine

• Do not store toner units, PC drum units, and other supplies and

consumables in a place subject to direct sunlight and high temper-

ature and humidity, as poor image quality and malfunction could

result.

• Do not attempt to replace the toner unit and PC drum unit in a

place exposed to direct sunlight. If the PC drum is exposed to

intense light, poor image quality could result.

• Do not unpack a toner unit or PC drum unit until the very time of

use. Do not leave an unpacked unit standing. Install it immediately

or poor image quality could result.

• Do not keep toner units and PC drum units in an upright position

or upside down, as poor image quality could result.

• Do not throw or drop a toner unit or PC drum unit as poor image

quality could result.

• Do not use this product in an area where ammonia or other gases

or chemicals are present. Failure to do so may shorten the service

life of the product, cause damage or decrease performance.

• Do not use this product in an environment with a temperature out-

side the range specified in the operator’s manual, as a breakdown

or malfunction could result.

• Do not attempt to feed stapled paper, carbon paper or aluminum

foil through this product, as a malfunction or fire could result.

SAFETY INFORMATION

P-vi

Do not touch or scratch the surface of the toner unit developing roller

and the PC drum, as poor image quality could result.

Use the supplies and consumables recommended by the dealer. Use

of any supply or consumable not recommended could result in poor

image quality and breakdown.

Welcome

This User’s Guide explains how to operate the unit and replenish its supplies. It also gives

some troubleshooting tips as well as general precautions to be observed when operating the

unit.

To ensure the best performance and effective use of your unit, read this User’s Guide carefully

until you familiarize yourself thoroughly with the unit's operation and features.

Please keep this User’s Guide and use it as a quick and handy reference tool for immediately

clarifying any questions that may arise.

Please follow the instructions given in this User’s Guide when handling the system and do not

touch any part of the system the User’s Guide does not cover.

NEVER attempt to disassemble or remodel the system.

The contents of this User’s Guide are subject to change without notice.

No part of this User’s Guide may be quoted, reproduced, or translated into any other language.

Notes to Operators and Key Operators

The following safety rules should be observed:

[1] The unit should be kept free from moisture, dirt, dust and exposure to heat and direct sun-

light at all times.

[2] Keep hands, hair and clothing away from rollers and other moving parts.

[3] Before removing the Projection Lamp Unit, confirm that the machine is turned “OFF”.

[4] Be sure that the proper voltage is used and that the machine is well grounded. The use of

electrical extension cords is strongly discouraged.

[5] For best performance, only our authorized supplies are recommended for use with this

unit. Failure to use our authorized supplies may cause damage to the unit, in which case

the warranty may be rendered void.

[6] Do not attempt to remove any Cover that is secured.

FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause un-

desired operation.

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

The design and production of this unit conforms to FCC regulations, and any changes or

modifications must be registered with the FCC and are subject to FCC control. Any changes

made by the purchaser or user without first contacting the manufacturer will be subject to

penalty under FCC regulations.

Andere Handbücher für MS6000 MK II

Inhaltsverzeichnis

Andere Minolta Scanner Handbücher

Minolta

Minolta Dimage Scan Elite II Bedienungsanleitung

Minolta

Minolta Dimage Scan Elite II Bedienungsanleitung

Minolta

Minolta QuickScan 35 Bedienungsanleitung

Minolta

Minolta Scanner Mode Bedienungsanleitung

Minolta

Minolta DIMAGE SCAN SPEED Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi2 Bedienungsanleitung

Minolta

Minolta DIMAGE SCAN ELITE 5400 Bedienungsanleitung

Minolta

Minolta Dimage Scan Elite II Bedienungsanleitung

Minolta

Minolta MS 6000 Bedienungsanleitung

Minolta

Minolta DiMAGE Scan Multi PRO AF-5000 Bedienungsanleitung

Minolta

Minolta DR1600 Bedienungsanleitung

Minolta

Minolta DIMAGE SCAN ELITE 5400 Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Bedienungsanleitung

Minolta

Minolta DiMAGE Scan Multi PROAF-5000 Bedienungsanleitung

Minolta

Minolta DiMAGE DiMAGE Scan Multi PRO Bedienungsanleitung

Minolta

Minolta DIMAGE SCAN MULTI PRO Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Montageanleitung

Minolta

Minolta Dimage Scan Elite II Bedienungsanleitung

Minolta

Minolta PS7000 Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Bedienungsanleitung

Minolta

Minolta Dimage Scan Dual2 AF-2820U Bedienungsanleitung

Minolta

Minolta DiMAGE Scan Dual III AF-2840 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung