Mitsubishi Electric FR-CS84-295-60 Bedienungsanleitung

FR-CS84-295-60

Inverter; Rated Power: 15kW; 3x400V; Rated Current: 29.5A; IP20

Product Documentation

Instruction Manual

Product Overview

Mitsubishi Electric now introduces its latest generation of compact inverters, the FREQROL-

CS80 inverters. In addition to better features and performance than their predecessors, the

models in this series are also more compact and even easier to install. The improvements

include a 57% reduction in volume, high performance, ease of use and easy maintenance.

All the improvements make the FREQROL-CS80 an economical and highly-versatile solution

for a wide range of applications from wood processing to controlling fans and pumps.

FR-CS84-295-60

Lineup

The applicable motor capacity is the maximum allowable capacity of the motor with

respect to a Mitsubishi Electric 4-pole standard motor.

World’s smallest class compact body

The FREQROL-CS80 compact size is achieved by the low heat generation design. Side by

side installation of these inverters is possible as long as the surrounding air temperature

does not exceed 40°C. Three FR-CS84-012-60 inverters can be installed in the same space

normally required for two conventional models which ultimately means space saving. A

DIN rail installation attachment (FR-UDA [][]) option can be used but this is excluded for

inverters FR-CS84-120 to 295.

FR-CS84-295-60

High performance

Even with a 57% reduction in volume this inverter still offers high performance. Functions

available on this inverter include general-purpose magnetic flux vector control and auto

tuning functions. These functions ensure that these inverters can be used in applications

that require high starting torque, such as washing machines, agitators, and transfer

machines which includes conveyors, hoists, and elevators.

The high torque of 150% / 1 Hz is realized (when the slip compensation function is

valid).

Auto-tuning

With the “non-rotation” auto-tuning function the motor constant (R1) can be automatically

calculated.

There is also a brake unit connection which allows a brake unit to be connected using

terminal P/+ and terminal N/-. This is useful for applications that require regenerative

braking torque during deceleration, such as transfer machines and food machines. When

using the inverter with the brake unit, it is recommended the FR-CS84-050-60 inverter or

a higher capacity inverter is used.

Optimum excitation control continuously adjusts the excitation current to

an optimum level to provide the highest motor efficiency. For example, at 4% motor load

torque for a general-purpose motor, the motor efficiency under Optimum excitation

control is about 30% higher than the motor efficiency under V/F control. Optimum

excitation control is another option on this inverter. The excitation current is constantly

adjusted to its optimum value to drive the motor most efficiently. With a small load torque,

a substantial energy saving can be achieved.

FR-CS84-295-60

Easy to use

This inverter has an easy-to-read operation panel. An optional LCD operation panel, the FR-

LU08 is also available. This panel can be connected using the separate parameter unit

connection cable (FR-CB20 []) with the operation panel connection connector (FR-ADP).

Another operation panel, the enclosure surface operation panel FR-PA-07 enables inverter

operation and monitoring of frequency setting from the enclosure surface.

FR-CS84-295-60

The parameter unit FR-PU07 features helpful settings such as direct input with ten-key pad,

operating the status display, and help function. Eight languages are supported and

parameter settings for up to three units can be saved.

A free trial version of software FR Configurator2 can be downloaded at Mitsubishi Electric

FA Global website. This software contains start-up functions which allow for a shorter

startup time with easy setup. The FR configurator2 software has the common design and

operability of MELSOFT Mitsubishi Electric FA products.

FR-CS84-295-60

High-speed communication is supported using a controller and RS-485 communication. The

inverter can be controlled and monitored via a network. Using the Mitsubishi inverter

protocol, MODBUS RTU protocol enables communication with a speed of 115.2kbps which

is faster than the 38.4kbs of a conventional model.

Once the automatic connection on the inverter is enabled, the inverter connects easily and

communicates with the GOT2000 series by connecting to the GOT using RS-485

communication. The easy to follow display improves the operability of the inverter.

Easy maintenance

There is a reduction in the wiring check time since the wiring can be checked by simply

lifting the control terminal cover, which makes maintenance work easier. The control circuit

terminals are spring clamp terminals which allow for easy wiring to the control circuit.

The main circuit terminals are screw terminals. Easy wiring is completed by inserting the

dedicated blade terminal of each cable. Without using the blade terminal, the loose wires

can also be connected using a flathead screwdriver.

The spring clamp terminals provide high reliability since the internal terminal contacts are

spring-type.

Therefore, these wires can be protected against loosening or contact faults due to vibrations

during operation on a bogie or during transport. It is maintenance free because no

additional screw tightening is required.

A specialised coating that conforms to IEC 60721-3-3 3C2/3S2 standards, covers the circuit

board to protect the board in hazardous environments and for improved environmental

resistance.

FR-CS84-295-60

Supported Applications

This inverter supports a variety of functions that can be used in various applications.

Spinning Applications

Power failure time deceleration to-stop function

The motor decelerates to a stop without coasting when a power failure occurs or

undervoltage. Slack in the thread can be controlled even if there is a power failure.

Traverse function

The traverse function, used for the traverse axis of the spinning machine, prevents uneven

winding or collapsing.

Continuous operation function at instantaneous power failure

Even in the event of an instantaneous power failure, motor operation continues without

coasting and production is maintained.

FR-CS84-295-60

Conveyor applications

Communication operation (RS-485 communication)

Conveyor belts can be controlled individually by using multiple inverters. Automatic

operation is possible by collectively managing multiple inverters.

Increased excitation deceleration

The deceleration time can be reduced without using a brake resistor. The tact time can be

reduced to a transfer line or equivalent.

S-pattern acceleration/deceleration

An S-pattern is maintained from the present frequency to the target frequency; therefore it

is possible to reduce shock during acceleration/deceleration and prevent load shifts.

FR-CS84-295-60

Fan and pump applications

PID (Proportional, integral, derivative) control

The flow rate and air volume are controlled by an inverter. It is possible to regulate the flow

rate and the air volume so that they stay at a preset level.

Optimum excitation control

This control enables the motor efficiency to achieve its optimum. More energy saving is

possible in applications with variable load torque characteristic such as a fan and a pump.

Adjustable 3 points V/F

The optimal V/F pattern matching the torque characteristics of the facility can be set.

FR-CS84-295-60

Fountain applications

Continuous operation function at instantaneous power failure

Even in the event of an instantaneous power failure, motor operation continues without

coasting and the fountain’s operations are undisturbed.

General-purpose magnetic flux vector control Brake unit connection

A variety of fountain displays are possible by connecting a brake unit which allows high

starting torque and improved braking efficiency during deceleration under general-purpose

magnetic flux vector control.

Multi-speed function (Up to 15-speed switching operation)

Operation speeds can be preset via parameters. Motor speed to meet the height

requirements of the fountain can be set and easily changed.

Inhaltsverzeichnis

Andere Mitsubishi Electric Wechselrichter Handbücher

Mitsubishi Electric

Mitsubishi Electric PV-PNS04ATL-IT Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-B-750 to 75K Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric D700 Gebrauchsanweisung

Mitsubishi Electric

Mitsubishi Electric 800 Plus Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-F802-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-AF700-EC Series Merkblatt

Mitsubishi Electric

Mitsubishi Electric FR-A7NC E kit-SC Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 800-GF Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric DeviceNet FR-E5ND Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric fr-e700 series Installationsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A872-P Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A8ND Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 800 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A500L Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-LU08 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-E800 Gebrauchs- und Pflegehandbuch

Mitsubishi Electric

Mitsubishi Electric FR-A862 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-F720P-0.75K to 110K Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric fr-e700 series Merkblatt

Mitsubishi Electric

Mitsubishi Electric FR-E540-0.4K-EC Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric i-MTR2-G02-M0 Produkthandbuch

Mitsubishi Electric

Mitsubishi Electric 800 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-F740-00023 Merkblatt

Mitsubishi Electric

Mitsubishi Electric 700 Series Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung