Mitsubishi Heavy Industries SRK20ZJX-S Bedienungsanleitung

AIR-CONDITIONING & REFRIGERATION SYSTEMS HEADQUARTERS

16-5, 2-Chome, Kounan, Minato-ku, Tokyo, 108-8215, Japan

Fax: (03) 6716-5926

MITSUBISHI HEAVY INDUSTRIES EUROPE, LTD.

AIR-CONDITIONER DIVISION

3rd Floor Thavies Inn House 3-4 Holborn Circus London EC1N 2HA, ENGLAND

Phone: 44(0)20 7842 8171

Fax: 44(0)20 7842 8104

USER’S MANUAL

AIR-CONDITIONER

RKY012A006A

SRK20ZJX-S

SRK25ZJX-S

SRK35ZJX-S

SRK50ZJX-S

SRK60ZJX-S

MANUEL DE L’UTILISATEUR

CLIMATISEUR

ANWENDERHANDBUCH

KLIMAGERA

¨T

ISTRUZIONI PER L’USO

CONDIZIONATORE D’ARIA

MANUAL DEL PROPIETARIO

ACONDICIONADOR DE AIRE

GEBRUIKERSHANDLEIDING

AIRCONDITIONING

MANUAL DO UTILIZADOR

APARELHO DE AR CONDICIONADO

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

КОНДИЦИОНЕР ВОЗДУХА

KULLANIM KILAVUZU

ENGLISH

DEUTSCH

ITALIANO

ESPAN

˜OL

NEDERLANDS

PORTUGUÊS

РУССКИЙ

TÜRKÇE

FRANÇAIS

ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ

ΚΛΙΜΑΤΙΣΤΙΚΟ

ΕΛΛΗΝΙΚΑ

This air conditioner complies with EMC Directive 2004/108/EC,

LV Directive 2006/95/EC.

Ce climatiseur est conforme à la Directive EMC: 2004/108/EC, LV

Directive 2006/95/EC.

Dieses Kimagerät erfüllt die EMC Direktiven 2004/108/EC, LV

Direktiven 2006/95/EC.

Questo condizionatore d’aria è conforme alla Direttiva EMC: 2004/

108/EC, LV Direttiva 2006/95/EC.

Deze airconditioner voldoet aan EMC Directive 2004/108/EC, LV

Directive 2006/95/EC.

Este acondicionador de aire cumple con la directiva EMC: 2004/

108/EC, LV Directiva 2006/95/EC.

Este aparelho de ar condicionado está em conformidade com a

Directiva EMC 2004/108/EC e a Directiva LV 2006/95/EC.

∞˘Ùﬁ ÙÔ ÎÏÈÌ·ÙÈÛÙÈÎﬁ Â›Ó·È Û‡ÌÊˆÓÔ ÌÂ ÙÈ˜ ÚÔ‰È·ÁÚ·Ê¤˜ ÙË˜

√‰ËÁ›·˜ EMC 2004/108/EK Î·È ÙË˜ √‰ËÁ›·˜ LV 2006/95/EK.

RKY012A006_Cover_2009-0611 06/12/2009, 13:271

–1–

Thank you for purchasing a MITSUBISHI HEAVY INDUSTRIES, LTD. Air-Conditioner. To

get the best long-lasting performance, please read and follow this User’s Manual carefully

before using your air-conditioner. After reading, please store the Manual in a safe place

and refer to it for operational questions or in the event of any irregularities.

This air-conditioner is intended for domestic use.

Do not vent R410A into the atmosphere: R410A is a fluorinated greenhouse gas,

covered by the Kyoto Protocol with a Global Warming Potential (GWP) = 1975.

contents

ENGLISH

Your Air Conditioning product may be marked with this symbol. It means

that waste electrical and electronic equipment (WEEE as in directive 2002/

96/EC) should not be mixed with general household waste. Air conditioners

should be treated at an authorized treatment facility for re-use, recycling

and recovery and not be disposed of in the municipal waste stream. Please

contact the installer or local authority for more information.

This symbol printed in the batteries attached to your Air Conditioning

product is information for end-users according to the EU directive 2006/66/

EC article 20 annex II.

Batteries, at their end-of-life, should be disposed of separately from general

household waste. If a chemical symbol is printed beneath the symbol

shown above, this chemical symbol means that the batteries contain a

heavy metal at a certain concentration. This will be indicated as follows:

Hg:mercury(0.0005%) , Cd:cadmium(0.002%) , Pb:lead(0.004%)

Please, dispose of batteries correctly at your local community waste

collection or the recycling center.

Safety precautions........................................... 2

Name of each part and its function .................4

Remote control handling ................................ 6

Operation failure with the remote control ...... 6

Temporary run operation ................................ 6

Operation and display section for remote

control ............................................................. 7

Current time setting ........................................ 7

AUTO mode operation ...................................8

Temperature adjustment during AUTO.......... 8

FAN SPEED ................................................... 8

COOL/HEAT/DRY/FAN mode operation .....9

Air-conditioner operable

temperature setting ......................................... 9

Characteristics of HEAT mode operation ...... 9

Airflow direction adjustment ........................ 10

3D AUTO operation ..................................... 10

SLEEP TIMER operation .............................11

OFF-TIMER operation ................................. 11

ON-TIMER operation................................... 12

SLEEP TIMER + ON-TIMER operation ..... 12

PROGRAM TIMER operation ..................... 13

ALLERGEN CLEAR operation ................... 13

HIGH POWER/ECONOMY operation ........ 14

SELF CLEAN operation .............................. 15

Auto restart function ..................................... 15

Tips for effective operation .......................... 15

Installation location setting........................... 16

Maintenance.................................................. 17

Proper installation ......................................... 19

Troubleshooting ............................................ 19

Notice ........................................................... 20

Contact your dealer....................................... 21

About the Multiple Air-conditioner.............. 21

Self diagnosis function ................................. 22

RKY012A006_EN_001-022 06/29/2009, 13:581

–2–

Safety precautions

•Before starting to use the system, please read these “Safety precautions” carefully to ensure proper operation of the system.

•The safety precautions are classified as “ DANGER” and “ CAUTION”. Precautions as shown in the column “ DANGER” indicate that

improper handling could lead to drastic result like death, serious injury, etc. Even precautions as shown in the column “ CAUTION” might pose

a serious problem, depending on the circumstances. Please observe these precautions with great care, since they are essential to your safety.

•Symbols which appear frequently in the text have the following meaning:

•When you have read this instruction manual, please keep it without missing. If someone else takes over as operator, make certain that the manual is

also passed on to the new operator.

Strictly prohibited Provide proper earthing

Observe instructions with

great care

❚INSTALLATION PRECAUTIONS

❚OPERATION PRECAUTIONS

DANGER

Make sure that the system has been

properly earthed.

Depending on the place of installation,

an earth leakage breaker may be neces-

sary.

Do not install it where flammable gas

may leak.

Make sure to install the drain hose

properly so that all the water is

drained out.

The system is for domestic, residential

etc. use.

The system must be installed by your

dealer or a qualified professional.

If used in severer environments, such

as an engineering workplace, the

equipment may function poorly.

It is not advisable to install the system

by yourself, as faulty handling may

cause leakage of water, electric shock

or fire.

Gas leaks may cause fire. If you do not install an earth leakage

breaker, you may get an electric shock.

Improper installation may lead to

water drop in the room resulting in

wet furniture.

Earth cables should never be connected

to a gas pipe, water pipe, lightning con-

ductor or telephone earth cable. Incor-

rect installation of the earth cable may

produce an electric shock.

Do not expose yourself to the cooling

air for a long period. Store the remote control out of reach

of infants.

Do not swing from the indoor unit.

This could affect your physical condi-

tion and cause health problems.

This may cause injury, as the inter-

nal fan rotates at high speed.

Failure to observe this may result in

the batteries being swallowed or

other accidents.

Use of steel or copper wire instead of

an approved fuse is strictly prohib-

ited, as it may cause a breakdown or

fire.

This may cause an electric shock. If the indoor unit falls down,

you may get injured.

Do not wash the air-conditioner with wa-

ter.

You should not expose any combus-

tion appliance directly to the air

stream of the air-conditioner.

Do not place a flammable insecticide or

paint spray near the blower, nor spray it

directly on the system.

This may result in a fire. The appliance may then work inad-

equately.

This could cause an electric shock.

Do not insert anything into the air inlet.

Do not handle the switches with wet

hands.

Only use approved fuses.

CAUTION

CAUTIONDANGER

Do not place anything containing wa-

ter, like vases, on top of the unit.

The system should only be used for its original purpose

and not for anything else like, for instance, preservation of

food, plants or animals, precision devices or works of art.

Do not install the system where the

airflow direction is aimed directly at

plants or animals.

The system is only intended for use in

ordinary domestic rooms. Any other

use of the system may damage the

quality of food, etc.

Water entering the unit could dam-

age the insulation and therefore

cause an electric shock.

This will damage their health.

RKY012A006_EN_001-022 06/30/2009, 12:472

–3–

❚Safety precautions

CAUTION

❚PRECAUTIONS FOR RELOCATION OR REPAIRS

DANGER

Do not shut off the power supply im-

mediately after stopping the opera-

tion.

Do not place objects near the outdoor

unit or allow leaves to gather around

the unit.

Do not sit on the outdoor unit nor put

anything on it.

After a long period of use, check the unit's

support structure from time to time.

Do not touch the aluminum fins on the

air heat exchanger.

Do not operate the system without the

air filter.

When you clean the system, stop the

unit and turn off the power supply.

Do not place household electrical appli-

ances or household items under neath

the indoor or outdoor units.

Contact your dealer to clean inside

the indoor unit, do not attempt to do

by yourself.

Stop the unit and turn off the power if

you hear thunder or there is a danger of

lightning.

If the unit falls down or things drop

off it, people could get hurt.

If you do not repair any damage

right away, the unit may fall down

and cause personal injury.

It may result in injury.

Condensation falling from the unit

may stain objects and cause accidents

or electrical shock.

It can cause malfunction of the sys-

tem due to clogging of the heat ex-

changer.

Wait at least 5 minutes, otherwise

there is a risk of water leakage or

breakdown.

Never open the panel while the

internal fan is rotating. If there are objects or leaves around

the outdoor unit, small animals

may enter unit and contact electri-

cal parts and may cause a break-

down, smoke or fire.

The use of a non-approved detergent

or improper washing method may

damage the unit’s plastic compo-

nents and cause leaks. Damage,

smoke, or fire may also happen if the

detergent comes in contact with

electrical parts or the unit’s motor.

It may damage the unit.

Consult your dealer for repairs.

If you notice anything abnormal (smell of

burning, etc.), stop the system, turn off

the power supply and consult your dealer.

In case the air-conditioner is relocated

elsewhere, contact your dealer or a

professional fitter.

If the air-conditioner fails to cool or warm the room, it may have a refrigerant

leakage. Contact your dealer.

If refrigerant needs to be added, check with your dealer for proper instructions.

Wrong repairs could cause an electric

shock, fire, etc.

Faulty installation may cause water

leakage, electric shock, fire, etc.

Continued use of the system in ab-

normal circumstances may result in

malfunctioning, electric shock, fire,

etc.

The refrigerant used in your air-conditioner is safe. However, if refrigerant unexpectedly

leaks from the unit onto a fan heater, stove, hotplate or other heat source, harmful gases could

be generated.

Stand firmly on a stepladder or other

stable object when removing the inlet

panel and filters.

If you operate the system together

with a combustion appliance, you

must regularly ventilate the indoor air.

Insufficient ventilation may cause

accidents due to oxygen deficiency.

Failure to observe this may result in

injury through insecure objects top-

pling over.

Do not control the system with main

power switch.

It can cause fire or water leakage. In

addition, the fan can start unexpect-

edly, which can cause personal injury.

Do not perform any repairs or modifica-

tions by yourself. Consult the dealer if

the unit requires repair.

If you repair or modify the unit, it can

cause water leaks, electric shocks or

fire.

RKY012A006_EN_001-022 06/29/2009, 13:593

–4–

Name of each part and its function

INDOOR UNIT

Air filter

Removes dust or dirt from the inlet air.

Page 17

Air Inlet panel

Draws the indoor air. Page 17

Drain hose

Drains water from the indoor unit.

Left/right airflow direction adjustment louver

Page 10

Up/down airflow direction adjustment flap

Page 10

Air outlet

Air blows out of here.

Heat exchanger

Room temperature sensor

Air-cleaning filter

Refrigerant piping connection and electric wire

Indoor unit fan

Air Inlet top panel

OUTDOOR UNIT

Air outlet

Air inlet

(On side & rear surface)

Outdoor unit fan

Heat exchanger

Page 18

Page 17

RKY012A006_EN_001-022 06/29/2009, 13:594

–5–

Unit display section

3D AUTO light (green)

Illuminates during 3D AUTO operation.

HI POWER light (green)

Illuminates during HIGH POWER operation.

TIMER light (yellow)

Illuminates during TIMER operation.

This button can be used for turning on/off the unit when remote

control is not available.

Page 6

Remote control signal receiver

Unit ON/OFF button

Name of each part and its function

CAUTION

•Do not touch the air inlet panel while it is operating.

The air inlet panel opens up while the system is operating.

Please do not install the unit in a fashion in which the air inlet panel

cannot open or place objects near the indoor unit.

RUN (HOT KEEP) light (green/blue)

•Illuminates during operation.

green : except ECONO operation

blue : ECONO operation

•

Blinks when airflow stops due to the ‘HOT

KEEP’

and

‘

CLEAN operation

’.

Page 15

OFF

1.5 sec.

0.5 sec.

HOT KEEP

3 sec.

1 sec.

OFF

CLEAN operation

•Buzzer sound for remote control

When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PiPi) is produced.

When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode), the buzzer sound (Pi) is produced.

This function is useful for operating the air conditioner in the darkness.

NOTE

Preset temperature

Air flow setting

RKY012A006_EN_001-022 06/29/2009, 13:595

–6–

Remote control handling

Replacing the batteries

The following cases signify exhausted batteries. Replace old batteries with new ones.

•Receiving beep is not emitted when a signal is transmitted.

•Display fades away.

NOTE

•Do not use old and new batteries together.

•Remove the batteries when the remote control is not used for a long period.

•The recommended effective period of a battery conforming to JIS or IEC should be

6 to 12 months with normal use. If used longer, or when an unspecified battery is

used, liquid may leak from the battery, causing the remote control to malfunction.

•The recommendable effective period is printed on the battery. This may be shorter

due to manufacturering time to the unit. However, the battery may still be in

working order after expiry of its nominal life.

Pull out the cover and take out

old batteries.

Insert new batteries.

R03 (AAA, Micro) x2

Close the cover.

■When the display shows any abnormal condition, Press the ACL switch with

the tip of a ballpoint pen.

Pay attention to

the ªand ·

marks

Press the ACL switch with the

tip of a ballpoint pen.

The timer setting mode is displayed.

Page 7

Using the remote control holder

The remote control can be attached to a wall or pillar by

using a remote control holder. Before installing the remote

control, check that the air-conditioner receives the signals

properly.

For installing or removing the remote control, move it up or

down in the holder.

•Are the batteries running down?

“Replacing the batteries” above.

Replace the batteries with new ones and retry the operation.

Warning note for remote control handling

Operation failure with the remote control

•If the operation fails, operate the unit with

temporary operation function.

Contact your dealer to have the remote control

checked.

Below

Strictly prohibited

•Do not drop the remote control.

Handle with care.

•Do not go near high temperature

places, such as an electric carpet

or stove.

•Do not place heavy objects on the

remote control, or step on it.

•Do not put any obstructing obsta-

cles between the remote control

and the unit.

•Do not spill any liquid on the

remote control.

•Do not leave the remote control ex-

posed to direct sunlight or other

strong lighting.

Temporary run operation

•The unit ON/OFF button on the unit operates ON/OFF temporarily when the remote control is not used.

Operation program

•OPERATION MODE : AUTO

•FAN SPEED : AUTO

•AIR FLOW : AUTO

•Operation starts by pressing the unit ON/OFF button; it stops if you press

the button again. Unit ON/OFF button

•Do not hold the Unit ON/OFF button down for more than 5 seconds.

(Holding it down longer than 5 seconds sets the automatic cooling used during servicing or when relocating the air-conditioner.)

NOTE

RKY012A006_EN_001-022 06/29/2009, 13:596

–7–

Operation section

FAN SPEED button

Each time the button is pressed, the

display is switched over in turn.

•The above illustration shows all controls, but in practice

only the relevant parts are shown.

OPERATION MODE select button

Each time the button pressed, the

display is switched over in turn.

ON/OFF (luminous) button

Press to start operation, press again to

stop.

HI POWER/ECONO button

This button changes the HIGH POWER/

ECONOMY mode.

Page 14

Page 8

AIR FLOW (UP/DOWN) button

This button changes the air flow (up/down)

direction.

This button changes the air flow (left/right)

direction.

Page 10

SLEEP button

This button selects SLEEP operation.

Page 11

CLEAN switch

This switch selects the CLEAN mode.

Page 15

ON TIMER button

This button selects ON TIMER operation.

Page 12

AIR FLOW (LEFT/RIGHT) button

Page 10

3D AUTO button

This button sets 3D AUTO operation.

This button selects ALLERGEN CLEAR

operation.

ALLERGEN CLEAR button

ACL switch

This switch is for resetting microcomputer

and setting time. Page 6

Page 13

OFF TIMER button

This button selects OFF TIMER operation.

Page 11

TEMPERATURE button

These buttons set the room temperature.

(These buttons are used for setting the

current time and timer function as well.)

Page 10

This button cancels the ON timer, OFF

timer, and SLEEP operation.

CANCEL button

Page 8, 9

Operation and display section for remote control

Transmission procedure

When each button on the remote control is pressed – with the remote control pointing towards the air-conditioner unit a signal is transmitted.

When the air-conditioner receives the signal correctly, it will beep.

NOTE

Current time setting

■When inserting the batteries, the current time is automatically set to time setting mode.

13:00 is displayed as the current time. Set the clock to the right time.

Example: Set to 10:30.

Press the ACL switch.

Press with the tip of a ballpoint pen, etc.

The time display blinks and can be set to the current time.

Press the “ or ” button.

(Set to 10:30)

Press the ON/OFF button.

The display changes from blinking to steady lighting and the setting is complete.

Make sure to press the button within 60 seconds from the last operation in step 2,

otherwise the time is not set.

•The timer operation works based on the time clock, so please set it correctly.

•The remote control data is reset when the present time is set.

RKY012A006_EN_001-022 06/29/2009, 13:597

–8–

AUTO HI MED LO

•When changing FAN SPEED from HI to LO, the sound of

refrigerant flowing may be heard.

NOTE

Temperature adjustment during AUTO

■

Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or the button.

During automatic operation, 24ºC is preset both for heating and cooling.

AUTO mode operation

■

Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.

When a change in temperature is required.

Press the or button.

•If you do not want the AUTO mode program, change to

COOL, HEAT, DRY or FAN instead of AUTO.

Page 9

•Airflow direction adjustment procedure.

Page 10

AUTO mode can be

operated by simply

pressing the ON/OFF

button.

To stop: Press the ON/OFF button.

■Each time the button is pressed, the switch over occurs in the following order

–6 →–5 →............ –1 →±0 →+1 ............ +6.

When +6 is indicated, even if the button is pressed, the indicator does not change.

■Each time the button is pressed, the switch over occurs in the following order

+6 →+5 →............ +1 →±0 →–1 ............ –6.

When –6 is indicated, even if the button is pressed, the indicator does not change.

When the unit is not in AUTO mode:

Press MODE button.

Move the [ mark] to the (Auto) position.

Point the remote control toward the air-conditioner, and

Press the ON/OFF button.

When it is a little cold

Press the button.

When it is a little hot

Press the button.

Operation capacity by your choice FAN SPEED

Set automatically by microcomputer AUTO

Powerful operation with high capacity HI

Standard operation MED

Energy-saving operation LO

FAN SPEED

Press the FAN SPEED button.

Move the [

mark] to the preferred fan speed position.

■You can choose the capacity of your air-conditioner

when heating mode, cooling mode or fan mode.

•In case air is not blowing out during

the operation.

Page 20

•When the included clean filter is in-

stalled the air conditioner will clean

the air during automatic operation.

NOTE

Display in OFF status

•The current time and preset OPERA-

TION MODE are displayed while the

air conditioner is turned off.

Remote Control display

-6 -5 -4 -3 -2 -1 +0+1 +2+3 +4+5+6

18 19 20 21 22 23 24 25 26 27 28 29 30

Setting

temp.(

ºC

)

RKY012A006_EN_001-022 06/29/2009, 13:598

–9–

COOL/HEAT/DRY/FAN mode operation

Airflow direction adjustment procedure. Page 10

Point the remote control toward the air-conditioner, and

Press the MODE select button.

Move the [ mark] to the required operation position.

(Cool), (Heat), (Dry), (Fan)

Press the ON/OFF button.

Press the TEMP button.

Press or button for the preferred temperature.

Standard

To stop: Press the ON/OFF button.

•In case air is not blown out, when starting the heating operation.

Page20

•The operation program can also be set or changed when the air-

conditioner is not in operation.

NOTE

Air-conditioner operable temperature setting

■Use within the following operational range. Operating outside of this range may result in the protection devices being activated, preventing the

unit from working.

Cooling operation Heating operation

Outside temperature Approximately -15 to 46 °C Approximately -15 to 21 °C

Inside temperature Approximately 18 to 32 °C Approximately 15 to 30 °C

Below approximately 80%

The long-term use of the unit with a humidity level

Inside humidity exceeding 80% may result in condensation forming on the —

surface of the indoor unit, leading to water drips.

Characteristics of HEAT mode operation

Mechanism and capacity of HEAT mode operation

■Mechanism

•The unit draws heat from the cold outside air, transfers it to indoors and heats the room. As a characteristic of heat pump system, the heating capacity

reduces when the outside air temperature gets colder.

•It may take some time to supply hot air after turning on the air-conditioner.

•If the outside temperature becomes extremely low, it would be better to use an additional source of heating.

Defrosting

If the outside temperature becomes low and humidity is high, the heat exchanger in the outdoor unit may frost over, which prevents efficient heating.

If this happens, the automatic defrost function is activated and during defrosting the heating operation stops for 5 to 15 minutes

during defrosting.

•Both indoor and outdoor fans stop and the RUN light blinks slowly (1.5 sec. ON, 0.5 sec. OFF) during defrosting.

•The outdoor unit may give off some steam during defrosting. This is to help the defrosting process and is not a defect.

•The HEAT operation resumes as soon as defrosting has been completed.

Press the FAN SPEED button

Set the fan speed as preferred.

RKY012A006_EN_001-022 06/29/2009, 13:599

Andere Handbücher für SRK20ZJX-S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Mitsubishi Heavy Industries Klimaanlage Handbücher

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK25ZGX-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20HG-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRF25ZJX-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK50HE-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTC71VNXPVD Produkthandbuch

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries KX6 series Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDT71VNPVF1 Produkthandbuch

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDC224KXE6 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries MHI FDU71VNXVF1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZJ-S Produkthandbuch

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRF25ZMXA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDC71VNX Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRC50HE-S1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK63ZRH-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTC40ZIXVD Produkthandbuch

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK25ZSP-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDC280KXZE1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK06CJ Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries HMU140KXZE1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK63ZM-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTVA151HEN Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTCVA151HEN1R Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK18YL-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SCM71ZM-S1 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung