Mitsubishi F940GOT-SWD-E Bedienungsanleitung

OPERATION MANUAL

F940GOT-SWD-E, F940GOT-LWD-E

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the cor-

rect installation and operation of the communication facilities of F940GOT.

• Before attempting to install or use the communication facilities of F940GOT this manual

should be read and understood.

• If in doubt at any stage of the installation of the communication facilities of F940GOT always

consult a professional electrical engineer who is qualified and trained to the local and

national standards which apply to the installation site.

• If in doubt about the operation or use of the communication facilities of F940GOT please

consult the nearest Mitsubisi Electric distributor.

• This manual is subject to change without notice.

Graphic Operation Terminal F940GOT

GRAPHIC OPERATION TERMINAL

F940GOT

OPERATION MANUAL

Manual number : JY992D78001

Manual revision : B

Date : August 1999

Graphic Operation Terminal F940GOT

FAX BACK

Mitsubishi has a world wide reputation for its efforts in continually developing and pushing back

the frontiers of industrial automation. What is sometimes overlooked by the user is the care

and attention to detail that is taken with the documentation. However,to continue this process

of improvement, the comments of the Mitsubishi users are always welcomed. This page has

been designed for you,the reader,to fill in your comments and fax them back to us. We look for-

ward to hearing from you.

Fax numbers: Your name....................................................

Mitsubishi Electric.... .....................................................................

America (708)298-1834 Your company ..............................................

Australia (02)638 7072 .....................................................................

Germany (0 21 02)4 86-1 12 Your location:................................................

South Africa (0111)444-8304 .....................................................................

United Kingdom (01707)278695

Please tick the box of your choice

What condition did the manual arrive in? ¨Good ¨Minor damage ¨Unusable

Will you be using a folder to store the manual?¨Yes ¨No

What do you think to the manual presentation?¨Tidy ¨Un-friendly

Are the explanations understandable? ¨Yes ¨Not too bad ¨Unusable

Which explanation was most difficult to understand:..................................................................

....................................................................................................................................................

Are there any diagrams which are not clear? ¨Yes ¨No

If so,which:..................................................................................................................................

What do you think to the manual layout? ¨Good ¨Not too bad ¨Un-helpful

If there one thing you would like to see improved,what is it?......................................................

....................................................................................................................................................

Could you find the information you required easily using the index and/or the contents,if possi-

ble please identify your experience:............................................................................................

....................................................................................................................................................

Do you have any comments in general about the Mitsubishi manuals? .....................................

....................................................................................................................................................

Thank you for taking the time to fill out this questionnaire. We hope you found both the product

and this manual easy to use.

Graphic Operation Terminal F940GOT

Guidelines for the safety of the user and protection of the graphic operation ter-

minal

a This manual provides information for the use of the Graphic Operation Terminal

F940GOT. The manual has been written to be used by trained and competent personnel.

The definition of such a person or persons is as follows;

b Any engineer who is responsible for the planning, design and construction of automatic

equipment using the product associated with this manual should be of a competent

nature,trained and qualified to the local and national standards required to fulfill that role.

These engineers should be fully aware of all aspects of safety with regards to automated

equipment.

c Any commissioning or service engineer must be of a competent nature, trained and qual-

ified to the local and national standards required to fulfill that job. These engineers

should also be trained in the use and maintenance of the completed product. This

includes being completely familiar with all associated documentation for the said product.

All maintenance should be carried out in accordance with established safety practices.

d All operators of the completed equipment should be trained to use that product in a safe

and co-ordinated manner in compliance to established safety practices. The operators

should also be familiar with documentation which is connected with the actual operation

of the completed equipment.

Note : Note: the term ‘completed equipment’ refers to a third party constructed device which

contains or uses the product associated with this manual.

Notes on the symbology used in this manual

At various times through out this manual certain symbols will be used to highlight points of

information which are intended to ensure the users personal safety and protect the integrity of

equipment. Whenever any of the following symbols are encountered its associated note must

be read and understood. Each of the symbols used will now be listed with a brief description of

its meaning.

Hardware warnings

1 Indicates that the identified danger WILL cause physical and property damage.

2 Indicates that the identified danger could POSSIBLY cause physical and property

damage.

3 Indicates a point of further interest or further explanation.

Software warning

4 Indicates special care must be taken when using this element of software.

5 Indicates a special point which the user of the associate software element should

be aware of.

6 Indicates a point of interest or further explanation.

Graphic Operation Terminal F940GOT

Graphic Operation Terminal F940GOT Contents

Table of Contents

Guideline............................................................................................................................5

1. Introduction .........................................................................................1-1

1.1 Outline..............................................................................................................1-1

1.2 Function list......................................................................................................1-4

1.3 Format of manual.............................................................................................1-7

1.3.1 Contents described in manual.............................................................................1-7

1.3.2 Abbreviations used in text...................................................................................1-7

1.4 Expressions and basic operations of operation keys.......................................1-8

1.4.1 Expressions of operation keys ............................................................................1-8

1.4.2 Basic operations..................................................................................................1-8

1.5 System configuration .......................................................................................1-9

1.5.1 Enlarged view of connector.................................................................................1-9

1.5.2 Connection of peripheral units of GOT..............................................................1-10

1.5.3 Connection of peripheral units of PLC...............................................................1-11

1.6 Connection of PLC.........................................................................................1-13

1.6.1 Setting of connected PLC..................................................................................1-13

1.6.2 Connection of MELSEC FX/A Series (CPU PORT)..........................................1-13

1.6.3 Connection of MELSEC A Series (LINK PORT) ...............................................1-14

1.6.4 Connection of SYSMAC C Series.....................................................................1-15

1.6.5 Connection by general-purpose communication...............................................1-20

2. Start up ...............................................................................................2-1

2.1 Start up procedure...........................................................................................2-1

2.2 Operation environment setting.........................................................................2-3

2.3 Each mode selection procedure ......................................................................2-9

2.4 Security function (screen protection function)................................................2-11

3. Screen Mode.......................................................................................3-1

3.1 Outline of screen mode....................................................................................3-1

3.2 Change of displayed data ................................................................................3-3

3.2.1 Common contents in data change.......................................................................3-3

3.3 Numeric setting completion flag.......................................................................3-5

3.3.1 When FX-PCS-DU/WIN-E is used ......................................................................3-5

3.3.2 When SW¨D5C-GOTRE-PACK is used ............................................................3-6

4. HPP Mode...........................................................................................4-1

4.1 Outline of HPP mode.......................................................................................4-1

4.2 PROGRAM LIST..............................................................................................4-2

4.3 PARAMETER.................................................................................................4-11

4.4 DEVICE MONITOR........................................................................................4-12

4.4.1 Device/comment monitor...................................................................................4-12

4.4.2 Changing of set values and current values of T, C and D.................................4-14

4.4.3 Forced ON/OFF.................................................................................................4-16

4.5 LIST MONITOR .............................................................................................4-17

4.6 ACTIVE STATE MONITOR ...........................................................................4-18

4.7 BFM MONITOR .............................................................................................4-19

4.8 PC DIAGNOSIS.............................................................................................4-20

Graphic Operation Terminal F940GOT

Graphic Operation Terminal F940GOT Contents

5. Sampling Mode...................................................................................5-1

5.1 Outline of sampling mode................................................................................5-1

5.2 Outline of sampling condition setting ...............................................................5-3

5.2.1 SAMPLE COND..................................................................................................5-5

5.2.2 START COND.....................................................................................................5-6

5.2.3 END COND.........................................................................................................5-7

5.2.4 SAMPLING DEV. ................................................................................................5-9

5.3 Display of sampling result..............................................................................5-10

5.3.1 DISPLAY LIST...................................................................................................5-10

5.3.2 DISPLAY GRAPH .............................................................................................5-10

5.4 CLEAR DATA ................................................................................................5-11

5.5 Control signals in PLC ...................................................................................5-12

5.5.1 When screen creation software DU/WIN is used..............................................5-12

5.5.2 When screen creation software GOT-A900 is used..........................................5-12

6. Alarm Mode.........................................................................................6-1

6.1 Outline of alarm function..................................................................................6-1

6.1.1 Alarm function in screen mode............................................................................6-2

6.1.2 Alarm function in alarm mode..............................................................................6-5

6.2 Operation when alarms have occurred............................................................6-6

6.3 Alarm list..........................................................................................................6-7

6.4 Alarm history display........................................................................................6-9

6.5 Alarm frequency display.................................................................................6-10

6.6 Alarm history clear .........................................................................................6-11

7. Test Mode...........................................................................................7-1

7.1 Outline of test mode.........................................................................................7-1

7.2 USER SCREEN...............................................................................................7-2

7.3 DATA BANK.....................................................................................................7-3

7.4 DEBUG............................................................................................................7-4

8. Other Mode.........................................................................................8-1

8.1 Outline of other mode ......................................................................................8-1

8.2 SET TIME SWITCH.........................................................................................8-2

8.3 DATA TRANSFER...........................................................................................8-3

8.4 PRINT OUT......................................................................................................8-4

8.5 ENTRY CODE .................................................................................................8-6

8.6 SET UP MODE ................................................................................................8-7

9. Creation of Display Screens................................................................9-1

9.1 Outline of compatibility of screen data.............................................................9-2

9.1.1 Functions dedicated to screen creation software for DU.....................................9-3

9.1.2 Common functions ..............................................................................................9-4

9.1.3 Functions dedicated to screen creation software for GOT-A900 ........................9-7

9.2 Transfer of screen data....................................................................................9-8

9.3 Use of data in FX-50DU-TK(S)-E...................................................................9-10

9.4 Concept on screen display.............................................................................9-11

9.4.1 Screen display position .....................................................................................9-11

9.4.2 Number of display screens and screen Nos......................................................9-11

9.4.3 Number of display elements and data capacity.................................................9-12

9.4.4 Attribute of display element...............................................................................9-13

9.5 Screen call function and overlay function ......................................................9-14

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Touch-Terminal Handbücher

Mitsubishi

Mitsubishi G0T-A900 Series Bedienungsanleitung

Mitsubishi

Mitsubishi GT10 Bedienungsanleitung

Mitsubishi

Mitsubishi GOT1000 GT11 Bedienungsanleitung

Mitsubishi

Mitsubishi GT16 Bedienungsanleitung

Mitsubishi

Mitsubishi GOT2000 Series Gebrauchsanweisung

Mitsubishi

Mitsubishi GOT MELSEC 800 Series Bedienungsanleitung

Mitsubishi

Mitsubishi GT1150-QLBD Bedienungsanleitung

Mitsubishi

Mitsubishi 900 Series Bedienungsanleitung

Mitsubishi

Mitsubishi F940 Bedienungsanleitung

Mitsubishi

Mitsubishi F940 Bedienungsanleitung

Mitsubishi

Mitsubishi GT1040-QBBD Bedienungsanleitung

Mitsubishi

Mitsubishi GT14 Bedienungsanleitung

Mitsubishi

Mitsubishi GT16 Bedienungsanleitung

Mitsubishi

Mitsubishi A953GOT-SBD-M3-H Bedienungsanleitung

Mitsubishi

Mitsubishi F940GOT Handy Series Bedienungsanleitung

Mitsubishi

Mitsubishi GOT1000 GT15 Bedienungsanleitung

Mitsubishi

Mitsubishi F940WGOT-TWD Bedienungsanleitung

Mitsubishi

Mitsubishi MELSEC GOT-F900 Bedienungsanleitung

Mitsubishi

Mitsubishi F930GOT-BBD-K-E Bedienungsanleitung

Mitsubishi

Mitsubishi GOT1000 Series Gebrauchsanweisung

Mitsubishi

Mitsubishi GT16 Bedienungsanleitung

Mitsubishi

Mitsubishi 900 Series Bedienungsanleitung

Mitsubishi

Mitsubishi GOT MELSEC 800 Series Bedienungsanleitung

Mitsubishi

Mitsubishi F930GOT-BBD-K-E Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung