Mocka Kennedy Bedside Table Bedienungsanleitung

*We recommend using a Flathead screwdriver to

tighten all locking nuts 100% before rst use.

Please clear any loose wood from the locking nut

holes before inserting the nut to ensure it locks 100%.

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances,

i.e. if a child attempts to climb up on the furniture or in the event of an earthquake. Accordingly, we recommend

that all furniture is anchored to a wall. We supply a free safety wall anchor with all furniture sold and we

recommend these are used to prevent your product tipping. The fixing device provided should fit most wall

types, but please note that different wall materials may require different fixing devices from those supplied.

Phillips & Flathead screwdrivers required.

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

A B C D E F G HJ

KLMN

Hardware Supplied

dowel

screw

x22

bolt

x20

locking

nut x20

bracket

slide

rail x2

slide

rail x2

screw

slide

rail x2

slide

rail x2

bolt

x16

cover

plug

O P Q

wedge

allen

key x1

Wall Strap

washer

wall

anchor

safety

strap x1

screw

wall

screw

long

bolt x4

screw screw

x4 x8 x16

washer

Kennedy Bedside Table

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

Attach 1x bracket (E) to panel [2] and secure with 2x screws (D). Tighten

with a screwdriver and attach 1x cover (F) as shown. Insert 4x bolts (B)

into panel [2]. Now attach 1x bracket (E) to panel [5] and secure with 2x

screws (D). Tighten with a screwdriver and attach 1x cover (F).

Insert 2x bolts (B) into panel [3]. Insert 2x bolts (B) into panel [4].

Kennedy Bedside Table

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Assembly Instructions

Attach 1x bracket (E) to panel [2] and secure with 2x screws (D). Tighten

with a screwdriver and attach 1x cover (F) as shown. Insert 4x bolts (B)

into panel [2]. Now attach 1x bracket (E) to panel [5] and secure with 2x

screws (D). Tighten with a screwdriver and attach 1x cover (F).

Insert 2x bolts (B) into panel [3]. Insert 2x bolts (B) into panel [4].

Insert 4x bolts (B) into panel [1]. Attach 1x plug (G) to panel [8] and

secure with 1x screw (D). Tighten with a screwdriver. Insert 4x bolts (B)

into panel [8]. Attach 1x plug (G) to panel [9] and secure with 1x screw

(D). Tighten with a screwdriver. Insert 4x bolts (B) into panel [9].

Attach panel [5] to panels [3] and [4] using 4x locking nuts (C). Tighten

with a screwdriver.

Kennedy Bedside Table

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Assembly Instructions

Attach panel [2] to panels [3] and [4] using 4x dowels (A) and secure

with 4x locking nuts (C). Tighten with a flathead screwdriver.

Attach a leg bracket (I) to each leg [7] using 2x screws (S) and 1x long

bolt (Q). Tighten with the allen key (O) and screwdriver. Attach the leg

panels [7] to panel [2] using 16x bolts (H) and 16x washers (T) as shown.

Tighten with the allen key (O).

front front

back

Kennedy Bedside Table

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe

ASSEMBLY INSTRUCTIONS

mocka.co.nz | mocka.com.au

Attach panel [2] to panels [3] and [4] using 4x dowels (A) and secure

with 4x locking nuts (C). Tighten with a flathead screwdriver.

Attach a leg bracket (I) to each leg [7] using 2x screws (S) and 1x long

bolt (Q). Tighten with the allen key (O) and screwdriver. Attach the leg

panels [7] to panel [2] using 16x bolts (H) and 16x washers (T) as shown.

Tighten with the allen key (O).

front front

back

Attach 2x slide rails (J) to panel [3] and secure with 4x screws (D).

Attach 2x slide rails (K) to panel [4] and secure with 4x screws (D).

Tighten with a screwdriver.

Slide panel [6] down along the grooves between the side panels to form

the back of the unit.

Kennedy Bedside Table

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910

Attach panel [1] using 4x dowels (A) and secure with 4x locking nuts

(C). Tighten with a screwdriver.

Attach panels [10], [11] and [12] as shown using 4x screws (L). Tighten

with a screwdriver. Slide panel [13] along the grooves between the side

panels [10] and [11] to form the base of the drawer.

Drawers x2

A10

Kennedy Bedside Table

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910

Attach panel [1] using 4x dowels (A) and secure with 4x locking nuts

(C). Tighten with a screwdriver.

Attach panels [10], [11] and [12] as shown using 4x screws (L). Tighten

with a screwdriver. Slide panel [13] along the grooves between the side

panels [10] and [11] to form the base of the drawer.

Drawers x2

A10

Attach front panel [8] to panels [10] and [11] using 4x locking nuts (C).

Attach front panel [9] to panels [10] and [11] using 4x locking nuts (C).

Tighten with a screwdriver.

Attach 2x slide rails (M) and 2x slide rails (N) to the underside of the side

panels as shown. Secure with 8x screws (D) and tighten with a

screwdriver.

Kennedy Bedside Table

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14

Insert the assembled drawers into the corresponding compartments as

shown. Ensure the drawers slide easily along the rails. If the drawer is

not catching or sitting flush, twist the end of the cover (F) until it catches

on the stopper (G).

Attach 4x wedges (P) into the corners of the back of the unit and secure

with 4x screws (R). Tighten with a screwdriver.

Kennedy Bedside Table

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14

Insert the assembled drawers into the corresponding compartments as

shown. Ensure the drawers slide easily along the rails. If the drawer is

not catching or sitting flush, twist the end of the cover (F) until it catches

on the stopper (G).

Attach 4x wedges (P) into the corners of the back of the unit and secure

with 4x screws (R). Tighten with a screwdriver.

15 16

Attach 1x safety strap (V) to the top of the back side of the unit as

shown using 1x washer (Z) and 1x screw (W). Tighten with a

screwdriver.

Once assembled lift furniture into place, do not drag. Use a drill to create

a small hole lining up with the top of the safety strap (V). Fasten to wall

using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is

balanced and steady before use. You’re done, enjoy!

Wall Mount

wall

plug

long

screw

strap

washer

Kennedy Bedside Table

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Andere Mocka Inneneinrichtung Handbücher

Mocka

Mocka Lewis Bedienungsanleitung

Mocka

Mocka Jordi Drawers Bedienungsanleitung

Mocka

Mocka Parker Entertainment Unit Bedienungsanleitung

Mocka

Mocka Bronte Entertainment Unit Bedienungsanleitung

Mocka

Mocka Dakota Nine Cube Shelf Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

Mocka

Mocka Zander Dining Table Bedienungsanleitung

Mocka

Mocka Imogen Queen Bed Bedienungsanleitung

Mocka

Mocka Chelsea Bedienungsanleitung

Mocka

Mocka Zara Bedienungsanleitung

Mocka

Mocka Essentials Coffee Table Bedienungsanleitung

Mocka

Mocka Locka Double Bedienungsanleitung

Mocka

Mocka Sadie Buffet Bedienungsanleitung

Mocka

Mocka Sadie Bedienungsanleitung

Mocka

Mocka Porto Bookcase Bedienungsanleitung

Mocka

Mocka Kennedy Buffet Bedienungsanleitung

Mocka

Mocka Mod Headboard Bedienungsanleitung

Mocka

Mocka Porto Bedienungsanleitung

Mocka

Mocka Sadie Bedienungsanleitung

Mocka

Mocka Canyon Buffet Bedienungsanleitung

Mocka

Mocka Kenny Desk Bedienungsanleitung

Mocka

Mocka Inca Entertainment Unit Bedienungsanleitung

Mocka

Mocka Noah Play Table Bedienungsanleitung

Mocka

Mocka Luka Velvet Queen Bed Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung