Monogram ZISB420DH Bedienungsanleitung

Side by Side Refrigerators

Design Guide

With Installation Instructions

Installation

Instructions

10-14 GE

monogram.com

31-49057-1

224D1889P015

Safety Information

BEFORE YOU BEGIN

Read these instructions completely and carefully.

• IMPORTANT– Save these instructions for

local inspector’s use. Observe all governing codes

and ordinances.

• Note to Installer – Be sure to leave these

instructions with the Consumer.

• Note to Consumer – Keep these instructions with

your Owner’s Manual for future reference.

If you received a damaged refrigerator, you should

immediately contact your dealer or builder.

Skill Level – Installation of this refrigerator requires

basic mechanical, carpentry and plumbing skills.

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not

covered under the GE Appliance Warranty.

See the Owner’s Manual for warranty information.

WARNING Electrical Shock Hazard.

Plug into a grounded 3-prong outlet.

Do not remove the ground prong.

Do not use an adapter.

Immediately replace electric cords that become frayed

or damaged.

Do not use an extension cord with this appliance.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Follow the instructions in the section Grounding the

Refrigerator.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These

words are defined as:

DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

For Monogram local service in your area, call 1.800.444.1845.

For Monogram service in Canada, call 1.800.561.3344

For Monogram Parts and Accessories, call 1.800.626.2002.

www.monogram.com

WARNING Tip Over Hazard.

These refrigerators are top heavy, especially with any doors open, and must be secured to prevent tipping

forward which could result in death or serious injury. Read and follow the entire installation instructions for

securing the refrigerator with the anti-tip system.

WARNING Explosion Hazard.

Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in

fire, explosion, or death.

WARNING To reduce the risk associated with choking, do not allow children under 3 years of age to have

access to small parts during the installation of this product.

CAUTION Lifting Hazard

This refrigerator is very heavy. To reduce the risk of person injury during maneuvering and installing this

refrigerator, 3 people are required for proper installation of 36” wide model and 4 people are required for proper

installation of a 42” or 48” wide model.

AVERTISSEMENT Risque de basculement

Ces réfrigérateurs présentent une partie supérieure lourde, en particulier avec une porte ouverte; ils doivent donc

être fixés pour prévenir le basculement vers l’avant et le risque concomitant de blessure grave ou fatale. Lisez et

suivez les instructions d’installation complètes pour l’installation du système anti-basculement.

AVERTISSEMENT Risque d’explosion.

Conservez les matériaux et vapeurs inflammables tels que l’essence à l’écart de votre réfrigérateur. Le non-

respect de cette instruction peut entraîner un risque d’incendie, d’explosion ou de décès.

AVERTISSEMENT Pour réduire le risque d’étouffement pendant l’installation de ce produit, ne pas laisser les

petites pièces à la portée des enfants âgés de moins de 3 ans.

ATTENTION Risque associé à la manutention d’une charge lourde

Ce réfrigérateur est très lourd. Pour réduire le risque de blessure lors de la manutention de ce réfrigérateur, trois

(3) personnes sont nécessaires pour procéder à l’installation appropriée du modèle 36 pouces, quatre (4) pour

l’installation des modèles 42 ou 48 pouces.

Consignes de Sécurité

AVERTISSEMENT Risque de choc électrique.

Branchez l’appareil dans une prise triple avec terre.

Ne retirez pas la broche de terre.

N’utilisez pas d’adaptateur.

Le non-respect de ces instructions peut entraîner des

risques d’incendies, des chocs électriques ou la mort.

Remplacer immédiatement tout cordon électrique

effiloché ou endommagé.

N’utilisez pas de rallonge avec cet appareil.

Le non-respect de ces instructions peut entraîner des

risques d’incendies, des chocs électriques ou la mort.

Suivez les instructions de la section Mise à la terre du

réfrigérateur.

Ce symbole représente une alerte de sécurité. Ce symbole vous avise de dangers possibles pouvant causer la mort, des

blessures ou autres. Tous les messages de sécurité seront précédés du symbole d’alerte de sécurité ainsi que des mots «

DANGER », « AVERTISSEMENT » ou « MISE EN GARDE ». Ces messages sont les suivants :

Signale une situation qui présente un danger imminent et qui, si elle n’est pas évitée, entraînera des bles

sures graves, voire la mort.

Signale une situation qui présente un danger imminent et qui, si elle n’est pas évitée, peut entraîner des

blessures graves, voire la mort. .

Signale une situation qui présente un danger imminent et qui, si elle n’est pas évitée, peut entraîner des

blessures mineures ou graves.

AVERTISSEMENT

DANGER

ATTENTION

Contents

Safety 2, 3

Planning Guide

The Installation Space 5

Dimensions and Clearances 5

Customization Basics 6

3/4” Overlay Panel Dimensions - Flush 7

1/4” Framed Panel Dimensions - Standard 8

3/4” Overlay Panel Dimensions - Standard 9

90° Door Swing 10

130° Door Swing 11

Dispenser Trim 12

Side Panels 13

Installation Instructions

Tools, Hardware, Materials 13

Parts Identification 14

Grounding the Refrigerator 15

Step 1. Remove Packaging 16

Step 2. Move Refrigerator into House 16

Step 3. Install Water Line 16

Step 4. Household Water Filtration 17

Step 5. Install Side Panels 17

Step 6. Install Case Trim 17

Step 7. Anti-Tip Procedure 17-18

Step 8. Level Refrigerator 18

Step 9. Secure Refrigerator to Cabinetry 18

Step 10. Adjust Door Swing 19

Step 11. Remove Door Trim 19

Step 12. Layout Decorative Door Panels 20-21

Step 13. Attach Brackets to Panels 21

Step 14. Hang Decorative Door Panels 22

Step 15. Layout Decorative Hood Panel 23

Step 16. Install Hood Panel 23

Step 17. Adjust Decorative Panels 24-25

Step 18 Replace Trim 25

Step 19. Connect Water Supply 26

Step 20. Connect Power, Close Grille Panel 26

Step 21. Start Icemaker 26

Step 22. Install Toekick 27

Inspect Final Installation 27

Design Guide

THE INSTALLATION SPACE

Water And Electrical Locations

The opening must be prepared with the electrical

and the cold water supply located as shown.

The Cutout Depth Must Be 24” For Standard Installation

The refrigerator will project forward, slightly beyond

adjacent cabinetry for standard installation.

The Cutout Depth Must Be 26-3/16” For Flush Installation

Wooden cleats are required for flush installation. See Side

Cleats on page 13.

Additional Specifications

• A 115 volt 60Hz., 15 or 20 amp power supply is

required. An individual properly grounded branch

circuit or circuit breaker is recommended. Install

a properly grounded 3-prong electrical receptacle

recessed into the back wall. Electrical must be located

on the rear wall as shown.

NOTE: GFI (ground fault interrupter) is not recommended.

• The water line can enter the opening through the floor

or back wall. The water line should be 1/4” O.D. copper

tubing or GE SmartConnect™kit between the cold

water line and water connection location, long enough

to extend to the front of the refrigerator. Installation of

an easily accessible shut-off valve in the water line is

required.

DIMENSIONS AND CLEARANCES

* Shipping height.

The refrigerator can

be adjusted to fit

into a cutout that

is 84-1/2” in height.

Use leveling legs

and wheels for a

maximum 1” height

adjustment.

Product Clearances

These refrigerators are

equipped with a 3-position

door stop. The factory-set

115° door swing can be

adjusted to 90° if clearance

to adjacent cabinets or

walls is restricted. Only

standard installation can be

adjusted to 130°.

90° Door Swing

130° Door Swing

115° Door Swing

*Finished Width

Electrical

Area

84 1/2" max

Finished

Opening 75" From Floor

to Bottom

of Electrical

Area

24"

5" 5" 3 1/2"

Water Supply

3 1/2"

36" Models 12"

42" Models 18"

48" Models 20"

Allow minimum clearances for the freezer door

(Dimension A) and fresh food door (Dimension B) for a

full 130° door swing and to allow for pan removal.

For a 90° door swing, allow 4” min. clearance to a wall,

for framed and stainless steel models. Allow 5” min.

clearance for professional series models. If the 90° door

stop position is used, pan access is maintained, but pan

removal is restricted.

See the illustrations on pages 6 and 7 to determine door

swing interaction with adjacent cabinets or countertops.

Models A B C

36” 13” 15” 20-5/8”

42” 13” 19” 26-5/8”

48” 15” 20” 28-5/8”

*84"

From

Floor

25-3/8" Framed Models

25-3/4" Stainless Steel Models

Depth Including Handles:

27-3/4" Stainless Steel Models

28-11/16" Professional Models

36", 42" or 48"

Frame to Frame

35", 41", or 47"

Case Width

*83-1/2"

Rear

23-7/8"

Behind

Frame

*Min. Distance

to Wall

*4” Stainless and

Trimmed Models.

5” Pro Series

*For standard installation, the finished cutout width

must be:

35-1/2” for 36” models

41-1/2” for 42” models

47-1/2” for 48” models

*For flush mount installation, the finished cutout width

must be:

39” for 36” models

45” for 42” models

51” for 48” models

CUSTOMIZATION BASICS:

Professional Style Stainless Steel Refrigerators

Stainless steel wrapped refrigerators have beveled edges and professional-style handles. These models are shipped ready

for installation.

Stainless Steel Wrapped Refrigerators

Stainless Steel wrapped refrigerators have wrapped doors and grille panel, beveled edges, and tubular stainless steel

handles that coordinate with other Monogram appliances. These models are shipped ready for installation.

Trimmed Refrigerators

Trimmed refrigerators are designed to be customized with decorative panels. Field installed custom door and grille panels

are required.

Optional Accessory Kits

ZKHSS2: Monogram Tubular Stainless Steel handles

designed to fit 3/4” overlay panels.

ZKHPSS1: Professional Tubular Stainless Steel handles

designed to fit 3/4” overlay panels. Kit includes one

handle. Order 2 kits for side-by-side refrigerator models

from your Monogram supplier

ZTK36SSH: Trim Kit for 36” Side-by-side refrigerator using

custom panels for standard installation.

ZTK42SSH: Trim kit for 42” Side-by-side refrigerator using

custom panels for standard installation.

ZTK48SSH: Trim kit for 48” Side-by-side refrigerator using

custom panels for standard installation.

Design Guide

CUSTOM HANDLE DESIGN GUIDE

(Flush Installation Only)

For custom handle installation, counterbore holes in rear

of decorative panels may not exceed 1/4” depth to ensure

1/2” material thickness remains for handle support.

NOTE: The counterbore must not exceed 1” in diameter.

Minimum distance from handle

side edge to handle center

should be 1-1/4” as shown.

1/4”

1/2”

3/4”

1-1/4”1-1/4”

Design Guide

3/4” OVERLAY PANEL DIMENSIONS

(Flush Installation Only)

For a more custom appearance, overlay panels may be

installed to give a flush appearance with surrounding

cabinets. The overlay panel must be 3/4” thick. Panel

attaches to included brackets to provide mounting to the

appliance door.

NOTE: We recommend that decorative panels have inside

corners and edges rounded or beveled by cabinet maker to

avoid sharp edges on the panels. Edges to be treated should

include the top, bottom and hinge side edges.

IMPORTANT NOTE – DISPENSER MODELS

The refrigerator is supplied with matching adjustable

dispenser trims. The overlay dispenser trim is designed to fit

a total panel thickness of 3/4” plus up to 1/8” adjustability.

• If the panel is less than 3/4” a noticeable gap may be

created around the dispenser trim.

• If the panel is more than 3/4” and fully adjusted away

from door face, the dispenser trim cannot be secured to

the door.

Fresh

Food

Panel

Freezer

Panel

Grille Panel

Dispenser

Cutout

9-5/8"

Dispenser Cutout

15-3/8

IMPORTANT NOTE: Maximum total weight for the assembled

panels:

• Fresh food door panel – 75 lbs.

• Freezer door panel – 53 lbs.

• Grille Panel – 18 lbs.

Refrigerator A B C D E F G

36” Side-by-Side

(in inches) 38” 10-5/8” 68-13/16” 16-7/8” 20-7/8” 18” 3-7/16”

42” Side-by-Side

(in inches) 44” 10-5/8” 68-13/16” 16-7/8” 26-7/8” 18” 3-7/16”

48” Side-by-Side

(in inches) 50” 10-5/8” 68-13/16” 20-7/8” 28-7/8” 18” 5-7/16”

Dispenser

Cutout

Position

1/2”

1-1/4” 1”

Top/Bottom Hinge Clearance

Router 1/8” Deep Improper installation can lead to a finger pinch

point hazard between the side door trim and the

cabinets when operating the door, especially

with children. To minimize this risk you must

follow the installation instructions for cabinet

dimensions, trim assembly, and door stop angle.

Door Trim Pinch Point Hazard

WARNING

1/4” FRAMED PANEL DIMENSIONS

(Standard Installation Only)

If you choose to install framed panels, they must

be cut to the dimensions shown. The panels will slide

into the frame on the door and grille.

Non-Dispenser Models

If the custom panel is less than 1/4” thick and it fits

loosely in the door frame it can be backed up with

a piece of filler material or foam tape to improve

the fit.

Fresh

Food

Panel

Freezer

Panel

Grille Panel

Dispenser

Cutout

9-5/8"

Dispenser Cutout

15-3/8

Side-by-Side (in inches)

A B C D E F G

36” Models 33-7/8 9 68-3/8 14-9/16 18-9/16 17-13/16 3-1/8

42” Models 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16 17-13/16 3-1/8

48” Models 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16 17-13/16 5-1/8

Dispenser

Cutout Position

IMPORTANT NOTE: Maximum total panel weight:

• Fresh food door panel – 75 lbs.

• Freezer door panel – 53 lbs.

• Grille Panel – 18 lbs.

1/4"

Panel

Door

5/16"

Trim

Reveal

The framed panel must be 1/4” nominal

thickness to fit the dispenser trim.

IMPORTANT NOTE – DISPENSER MODELS

The refrigerator is supplied with two dispenser trims,

one for framed panels and one for overlay panels.

• If the panel is less than 0.250” thick, a noticeable gap

may be created around the dispenser trim. Foam

tape may be applied on the door to improve the fit.

• If the panel is more than 0.250” thick, the dispenser

trim cannot be secured to the door.

See Dispenser Trim Fit Example, page 12.

Design Guide

3/4” OVERLAY PANEL DIMENSIONS

(Standard Installation Only)

For a more custom appearance, overlay panels may

be installed on trimmed models. The overlay panel must

be secured to a 1/4” thick backer panel which slides

into the trim. A spacer panel 0.10” thick must be placed

between the overlay and backer panel.

Assemble the panels with glue and screws:

• Center the spacer panel on the backer panel, left to

right and top to bottom. Secure the panels with glue.

• Center the spacer and backer panel on the overlay

panel and secure with glue and screws. Screws must

be countersunk into the backer panel.

NOTE: Left-to-right offset is

not always equal to top-to-

bottom offset.

Spacer Panel

OverlayPanel

Backer Panel

Fresh

Food

Panel

Freezer

Panel

Grille Panel

Dispenser

Cutout

9-5/8"

Dispenser Cutout

15-3/8

*Cut the dispenser opening after the backer, spacer and overlay

panels have been assembled.

36” Side-by-Side (in inches)

A B C D E F G

1/4” Backer Panel 33-7/8 9 68-3/8 14-9/16 18-9/16

.10” Spacer Panel 33 8-3/8 67 13-1/4 17-1/4

3/4” Overlay Panel 34-1/8 9-1/4 68-5/8 14-13/16 18-13/16 17-15/16 3-1/4

42” Side-by-Side (in inches)

A B C D E F G

1/4” Backer Panel 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16

.10” Spacer Panel 39 8-5/8 67 13-1/4 23-1/4

3/4” Overlay Panel 40-1/8 9-3/4 68-5/8 14-13/16 24-13/16 17-15/16 3-1/4

48” Side-by-Side (in inches)

A B C D E F G

1/4” Backer Panel 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16

.10” Spacer Panel 45 8-5/8 67 17-1/4 25-1/4

3/4” Overlay Panel 46-1/8 9-3/4 68-5/8 18-13/16 26-13/16 17-15/16 5-1/4

*Dispenser

Cutout Position

IMPORTANT NOTE: Maximum total weight for the assembled

panels:

• Fresh food door panel – 75 lbs.

• Freezer door panel – 53 lbs.

• Grille Panel – 18 lbs.

IMPORTANT NOTE – DISPENSER MODELS

The refrigerator is supplied with two dispenser trims,

one for framed panels and one for overlay panels. The

overlay dispenser trim is designed to fit a total panel

thickness of 1.100”.

• If the panel is less than 1.100” a noticeable gap may

be created around the dispenser trim.

• If the panel is more than 1.100” the dispenser trim

cannot be secured to the door.

See Dispenser Trim Fit Example, page 12.

.250” + .10” + .750” = 1.100” Total Panel Thickness

• The overlay panel must be constructed according to

the specifications shown to achieve the correct total

thickness.

• Alternative panel construction methods such as

securing a 3/4” panel to a 1/4” backer panel cannot

be used. Another method, routing a 3/4” thick panel

on all sides, cannot be used. These methods will not

result in the required 1.100” panel thickness.

3/4"

Overlay

Panel

1/4"

Backer

Panel

Door

.10"

Spacer

Design Guide

1/4"

1/2"

3/4"

1-1/4"

1/4"

1/2"

3/4"

1-1/4"

1-1/2"

23-7/8"

From Rear of

Refrigerator

3/4" Overlay

Panel

(Nominal Size)

Case Trim

Refrigerator

Door

Stainless Steel

Top View

90° DOOR SWING

(Standard Installation

Only)

Scale 1:1

IMPORTANT NOTE –

FOR DISPENSER MODELS:

Dispenser models are supplied

with two dispenser trims, one to fit

framed panels and one for overlay

panels. Dispenser trim fit to the

custom panel depends on correct

panel thickness. Framed panels

must be 1/4” nominal. Overlay

panels should be constructed as

shown to accomplish a total 1.100”

thickness. See pages 9 and 10 for

details.

Frameless Cabinets:

The case trim overlaps

cabinets at the top

and sides. Therefore,

frameless cabinets may

require filler strips to

prevent interference

with cabinet door swing.

The opening must allow

for filler strips.

Design Guide

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Monogram Kühlschrank Handbücher

Monogram

Monogram ZIS360N Leitfaden

Monogram

Monogram ZIRS36N LH Bedienungsanleitung

Monogram

Monogram Monogram ZIBI240PII Bedienungsanleitung

Monogram

Monogram ZIC30GNZII Bedienungsanleitung

Monogram

Monogram ZFSB25D SS Bedienungsanleitung

Monogram

Monogram ZIRS36NM Bedienungsanleitung

Monogram

Monogram ZFGP21HXASS Bedienungsanleitung

Monogram

Monogram 36 Ceramic Cooktop Bedienungsanleitung

Monogram

Monogram Monogram ZFSB26DRSS Benutzerhandbuch

Monogram

Monogram 224D3094P002 Bedienungsanleitung

Monogram

Monogram ZIDI240 Bedienungsanleitung

Monogram

Monogram ZIC303NP II Series Bedienungsanleitung

Monogram

Monogram ZIK30GNHII Bedienungsanleitung

Monogram

Monogram ZIFI240HII Bedienungsanleitung

Monogram

Monogram ZIR360NNRH Bedienungsanleitung

Monogram

Monogram ZPB480D Bedienungsanleitung

Monogram

Monogram ZDOD240NSS Leitfaden

Monogram

Monogram ZIP360NH Bedienungsanleitung

Monogram

Monogram ZIRP360NXARH Bedienungsanleitung

Monogram

Monogram ZIR300NPKII Bedienungsanleitung

Monogram

Monogram Double Door, Double Drawer, Stainless Steel, Free-Standing... Bedienungsanleitung

Monogram

Monogram ZICS36N RH Bedienungsanleitung

Monogram

Monogram ZIS360N Bedienungsanleitung

Monogram

Monogram Monogram ZIRS360NX Handbuch

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung