Morphy Richards Saturn IntelliTemp 305003 Bedienungsanleitung

R 305003 MUK Rev1

* Register at www.morphyrichards.co.uk/support

UK and Ireland customers only

Please read and keep these instructions for future use

IMPORTANT: To reduce limescale damage, we recommend the use of distilled,

deionised or demineralised water. This is particularly important if you live in a hard

water area.

Never use battery topping up fluid or water containing any substances like starch,

sugar, fragrant additives or defrosted water from a refrigerator.

Failure to maintain your iron will invalidate your guarantee.

If you experience any problems with this iron, do not return to the store.

Please contact our help line who will be happy to help:

We do stock spare filler lids for this iron, so if you need a replacement please call 0344 873 0710.

U : 0344 871 0944 IRE: 1800 409 119

We'll keep you updated with special offers, competitions and important product information.

Pressurised Steam Iron with Pure

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:45 Page 1

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

Important safety instructions

•WARNING: Disconnect from the mains supply

before carrying out any routine maintenance.

•WARNING: Misuse of the appliance could cause

personal injury.

•

This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience or knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the

hazards involved.

•Children shall not play with the appliance.

•

Cleaning and user maintenance shall not be made

by children without supervision.

•

Keep the iron and its cord out of reach of children

less than 8 years of age at all times.

•The iron must not be left unattended while it is

connected to the supply mains.

•The plug must be removed from the socket before

filling the iron with water.

•The iron must be used and rested on a stable

surface.

•When placing the iron on its heel, ensure that the

surface on which the heel is placed is stable.

•The iron is not to be used if it has been dropped, if

there are visible signs of damage or it is leaking.

•The filling aperture must not be opened during use.

•Do not operate with a damaged grommet, it must

be replaced by the manufacturer, its service agent

or similarly qualified person in order to avoid a

hazard.

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:45 Page 2

•

CAUTION - HOT: Burns can occur from

touching hot parts.

•

WARNING: Do not discharge the steam

towards people or animals. Danger of

scalding.

•WARNING: To avoid electric shock, do not

immerse appliance in water / liquid.

Electrical requirements and mains cable

•Check that the voltage on the rating plate of your

appliance corresponds with your house electricity

supply which must be A.C. (Alternating current).

•Do not let the mains lead come into contact with the

hot soleplate of the iron.

•Should the fuse in the mains plug require changing,

a 13 amp BS1362 fuse must be fitted.

•WARNING: This appliance must be earthed.

PLEASE READ ALL INSTRUCTIONS AND EEP

FOR REFERENCE

Important safety instructions ........................................................

Electrical requirements ..................................................................

Steam iron overview / Features .....................................................

Digital display overview ...................................................................

Temperature guide ..........................................................................

Before first use ................................................................................

Location ...........................................................................................

Usage tips ........................................................................................

Using the iron ..................................................................................

Features ...........................................................................................

Maintaining your iron ......................................................................

Troubleshooting ..............................................................................

Guarantee ........................................................................................

Contents

7 & 8

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 3

(1) Eco steam button

(2) Turbo steam button

(3) Power button

(4) Water spray button

(5) Crease light button

(6) Power cord

(7) Controls

(8) Iron handle

(9) Cable pivot

(10) Digital display (see page 5)

(11) Steam trigger

(12) Filling cap

(13) Self clean button

(14) Iron heel

(15) Crease light

(16) Water spray nozzle

(17) Water tank

(18) Soleplate

Steam iron overview

3 4 5

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 4

Digital display (10) overview

Steam level indicators (19/20)

The steam level indicators change when you

select your desired steam level.

IntelliTemp setting indicator (21)

This stops flashing when the product has

reached the default temperature, allowing the

appliance to iron all ironable fabrics without the

temperature needing to be adjusted.

Steam active indicator (22)

The steam active indicator illuminates and

flashes when steaming is in operation (when

either Eco or Turbo steam is selected).

Self Clean indicator (23)

This indicator will illuminate when the system

requires cleaning.

Auto shut-off indicator (24)

This indicator illuminates if the appliance has

entered auto shut-off mode after not being

used or moved for 1 minute if sat horizontally,

or 8 minutes if stood upright on its heel.

Steam active

indicator

Eco setting

indicator

23 Self clean

indicator 24 Auto shut-off

indicator

IntelliTemp

setting indicator

Turbo setting

indicator

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 5

The steam iron is equipped with IntelliTemp technology, which means it is safe to use on all ironable fabrics

without adjusting the temperature setting.

Do not use on fabrics that have the ‘Do ot Iron’ Symbol.

For stubborn creases, a turbo steam setting is available.

Temperature guide

Symbol

Do not iron

Fabric Synthetics: Spandex or

elastane, or prints on

garments

All ironable fabrics Linen

Steam level setting

(see step 3 of

‘Using the iron’

on page 7)

Low High

With water in tank

Without water in tank

Steam/shot of steam

Dry and spray

Dry ironing

Remove all packaging and any protective cover from the soleplate (18), if any. Unwind and straighten the

power cord (6).

We recommend for first time ironing that you iron over an old towel.

Stand the iron on its heel (14) and locate it on the iron rest plate of your ironing board (if large enough) or

on a heat resistant stand at the same height as your ironing board or below it. Always ensure the iron is on

a firm surface when ironing.

WARNING: Do not use the product on a surface which could be damaged by heat or steam such as

a worktop or a polished wood surface.

If in doubt, contact Morphy Richards.

Unwind and straighten the power cord (6).

Textiles and clothes carry ironing instructions. If not, follow the temperature guide above, but test the

temperature by ironing the hem of the garment or other discreet area first.

Location

Usage tips

Before first use

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 6

WARNING: eep hands and body away from the hot soleplate (18).

Using the iron

1) Filling the tank

Make sure the iron is not plugged in. Fill the water tank (17) via the filling hole to the MAX graphic on

the side of the water tank, this shows the MAX level of water that the tank can hold and should be

checked whilst filling and the iron is tilted.

TO PROLONG THE LIFE OF THIS IRON, WE RECOMMEND THE USE OF DISTILLED, DEIONISED

OR DEMINERALISED WATER, ESPECIALLY IN HARD WATER AREAS.

Never use battery topping up fluid or water containing any substances like starch, sugar,

fragrant additives or defrosted water from a refrigerator.

OTE: Please see point 2 of ‘Exclusions’ on page 12.

Re-filling during use

If the water level is too low, the unit will not produce steam. If this happens, open the filling cap (12)

and refill with water.

To activate Eco steam, ensure the iron is in a

horizontal position i.e. soleplate (18) facing

downwards. Then press the Eco steam button

(1). The steam level indicator will flash and

steam will be released from the soleplate.

When the iron is rested on its heel (14) it will

pause the steam flow, this is to conserve water

in the tank. Once you resume ironing, the

continuous steam will automatically re-activate.

If the steam flow doesn't reactivate, firstly

check there is sufficient water in the tank, then

secondly put the iron in a horizontal position

and press the Eco Steam button again.

2) Switching on and IntelliTemp setting 3) Selecting Eco Steam

Plug the appliance into a mains outlet, a beep will

be heard and the product will automatically

switch on.

The IntelliTemp setting indicator (21) on the

digital display (10) will flash until the default

IntelliTemp temperature setting is reached, at

which point the IntelliTemp setting indicator will

remain constant and two beeps will be heard. The

IntelliTemp setting allows the appliance to iron all

ironable fabrics without the temperature needing

to be adjusted. However, do not iron any fabric

with this symbol .

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 7

To help remove stubborn creases, you may

use the water spray function. Aim the water

spray nozzle (15) at the difficult area on the

garment and firmly press and hold the water

spray button (4).

Pressing the water spray once will dispense a

set amount of water.

Using the iron (continued)

6) Water spray

When you have finished ironing, turn off the

appliance by pressing and holding the power

button (3) for 2-3 seconds. All indicators on the

digital display (10) will switch off.

To switch the product back on, press the power

button again. Alternatively, disconnect the plug

from the mains outlet if your ironing session is

complete.

7) Switching off

For more difficult ironing tasks, activate Turbo

steam by pressing the Turbo steam button (2).

The functionality is the same as Eco steam in the

previous step, but with a stronger steam flow.

4) Selecting Turbo Steam

The steam boost function is ideal for relaxing

the fibres of tougher fabrics (like jeans and

linen) and getting rid of those stubborn, hard

to reach creases.

To produce an extra boost of steam during

ironing, press the steam trigger (11).

OTE: For optimum steam quality, do not

operate the shot more than three times in

succession

5) Steam boost

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 8

Features

Crease light

To enable clearer vision in difficult to see areas,

press the crease light button (5) to switch on the

crease light (15), press again to switch off.

Dry ironing

To use your iron as a dry iron only, follow step 2

of ‘Using the iron’ on page 7. Do not press the

eco steam button (1) or the turbo steam button

(2) to operate the steam pump. You do not need

to put water in the water tank (17).

Vertical steam

Vertical steam is useful for removing creases from

dry clean only items, delicate clothing, curtains

and upholstery, etc.

To activate the steam for vertical steaming, hold

the iron vertically and press the

eco steam button

(1) or the turbo steam button (2)

. The steam level

indicator will flash to show when the iron is

steaming. Simply allow the steam to pass lightly

over the garment (at a distance of between 1cm

and 2cm away from the item) to gently remove

creases and freshen up the fabric. To conserve

water in the tank, the steam flow will

automatically stop when the iron is rested on its

soleplate

(18)

. You will need to press

the eco

steam button (1) or the turbo steam button (2)

again if you want to continue vertical steaming.

To generate a steam boost for stubborn creases,

press the steam trigger

(11)

WARNING: Do not use the vertical steam

feature on clothes that are being worn.

Auto shut-off

the iron is not moved

or any buttons on the

controls (7) are unused for 1 minute if sat

horizontally, or 8 minutes if stood upright on its

heel, the product will automatically turn off for

safety and to save energy. When this happens,

the auto shut-off indicator (24) will flash and beep

once.

To restart, either move the iron or press any

buttons on the controls (7) and wait for the

temperature to rise again.

OTE: The appliance is not turned off completely

in auto shut-off mode. To switch the product off,

press and hold the power button

(3)

until all

indicators in the digital display

(10)

extinguish,

then unplug the product from the mains outlet.

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 9

Emptying and storing

When you have finished ironing, p

ress and hold

the power button (3) to switch the product off,

then

unplug and empty all water from your iron.

When cool, store the iron on its heel

(14)

with the

power cord

(6)

wrapped loosely around the heel.

OTE: Please see point 4 of ‘Exclusions’ on page

Cleaning the soleplate

To clean a coated soleplate

Do not use scouring powder or solution as this

could cause damage to the coating.

If any man-made fibres fuse to the soleplate (18),

set the iron at the MAX setting and pass it over a

clean piece of cotton to draw the deposit off the

surface.

To clean the exterior

Allow the unit to cool and wipe over with a damp

cloth and mild detergent, then wipe dry.

Removing limescale

our iron has a built in self clean system

designed to keep the water valve, steam

chamber and steam vents clear of lint and

loose mineral deposits.

When the self clean indicator (23) appears on the

digital display (10), the self clean function must

be operated.

1Half fill the iron with water.

2Connect to a mains supply outlet.

3Wait for the temperature to be reached - the

IntelliTemp setting indicator

(21)

with illuminate

constantly.

ress and hold the power button (3) to switch

the product off

5Disconnect the iron from the mains supply outlet.

6Whilst the iron is still very hot, hold the iron

horizontally over a sink.

CAUTION: The soleplate will still be hot, so

ensure the power cord and plug are kept away

from it and the sink.

7Press and hold the self-clean button

(13)

WARNING: Steam and boiling hot water will

drain from the holes in the soleplate. eep

hands and body away from the hot water. This

washes away the scale and minerals that have

built up inside the steam chamber.

Whilst still holding the self-clean button, gently

move the iron back and forth until the water tank

is empty.

When steam and hot water ceases to be

released from the soleplate, release the

self-clean button.

When the process is complete, re-connect to a

mains supply outlet and allow to heat up - this

will dry the soleplate.

11 Disconnect the iron from the mains supply outlet.

Rest your steam iron on its heel

(14)

and allow to

fully cool down.

Wipe the soleplate with a cold, damp cloth.

After this cleaning operation, empty out any

remaining water.

IMPORTANT: Do not attempt to descale the

soleplate with descaling products.

Maintaining your iron

RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 10

Inhaltsverzeichnis

Andere Morphy Richards Eisen Handbücher

Morphy Richards

Morphy Richards Saturn Steam Bedienungsanleitung

Morphy Richards

Morphy Richards IB4050X Bedienungsanleitung

Morphy Richards

Morphy Richards Steam Generator Handbuch

Morphy Richards

Morphy Richards 40734 Bedienungsanleitung

Morphy Richards

Morphy Richards TURBOSTEAM 40659 Bedienungsanleitung

Morphy Richards

Morphy Richards Jet Stream Elite S Bedienungsanleitung

Morphy Richards

Morphy Richards JET STREAM Bedienungsanleitung

Morphy Richards

Morphy Richards NO MODEL NO NUMBER Bedienungsanleitung

Morphy Richards

Morphy Richards TURBOSTEAM RN40630 MUK REV2 Bedienungsanleitung

Morphy Richards

Morphy Richards RN40310MUK - REV 3 Bedienungsanleitung

Morphy Richards

Morphy Richards IB42345 Bedienungsanleitung

Morphy Richards

Morphy Richards breeze Bedienungsanleitung

Morphy Richards

Morphy Richards 40684 Bedienungsanleitung

Morphy Richards

Morphy Richards Turbosteam iron Bedienungsanleitung

Morphy Richards

Morphy Richards breeze Bedienungsanleitung

Morphy Richards

Morphy Richards Breeze 40310 Bedienungsanleitung

Morphy Richards

Morphy Richards Orbit Bedienungsanleitung

Morphy Richards

Morphy Richards Turbosteam Bedienungsanleitung

Morphy Richards

Morphy Richards SEMI-ELECTRONIC 40715 Bedienungsanleitung

Morphy Richards

Morphy Richards POWER STEAMELITE Bedienungsanleitung

Morphy Richards

Morphy Richards POWER STEAMELITE Bedienungsanleitung

Morphy Richards

Morphy Richards ORBIT TRAVEL 41540 Bedienungsanleitung

Morphy Richards

Morphy Richards IB4060X Bedienungsanleitung

Morphy Richards

Morphy Richards INTELLIDOME Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

Philips

Philips PerfectCare PSG71 Series Bedienungsanleitung

GE 169061 Bedienungsanleitung