Motorola Vonage VT2542 Bedienungsanleitung

Quick Start Guide

Vonage

Device Motorola VT2542

1. If you purchased your Vonage®Device from a retail store,

you must first activate your Vonage phone service.

(You will need to provide the MAC ID on the bottom

of the Vonage Device.)

In the U.S., visit www.vonage.com/activate.

In Canada, visit www.vonage.ca/activate.

2. If you received your Vonage Device in the mail

from Vonage, your Vonage phone service has

already been activated.

3. You also need a high-speed Internet connection,

such as DSL or cable, to use Vonage.

Helpful terms:

ISP (Internet Service Provider) –The company that

supplies your high-speed Internet connection.

Modem –Apiece of network equipment that your lnternet

Service Provider (ISP) sent you to gain high-speed

lnternet access – typically either DSL through your

phone line, or cable service.

Router –Arouter lets you connect more than one piece of

equipment (like computers) to your DSL or cable modem

to share one Internet connection. Some ISPs supply

combination modem/routers. (HINT: If you have more

than one computer connected to the Internet, then you

have a router.)

Port –This is an opening on a device where you connect a

cable. An Ethernet port looks like a wide phone jack.

Before you begin

Welcome

to the Quick Start Guide for Vonage®.

Get ready to start saving money on your phone bill with Vonage –

just follow these easy step-by-step instructions to set up your new

Vonage device. Within minutes, you’ll be making phone calls with

high-quality, low-cost Vonage phone service!

If you have questions along the way, please go to the

Troubleshooting Tips on page 9 or visit:

www.vonage.com/help (U.S.)

www.vonage.ca/help (Canada)

3Easy Steps!

Step 1: Identify the items you’ll need

Step 2: Set up your new Vonage Device

Step 3: Connect your phone

For your convenience, the complete User Guide for this Vonage

Device can be found online at www.vonage.com/vt2542 or in

Canada www.vonage.ca/vt2542

NOTE: Ensure you are using the power supply provided with the

Vonage Device. Using the wrong power supply could result in damage

to your equipment.

*Not required for installation.

Identify the items you’ll need

from your Vonage®Startup Kit.

Locate your:

•High-speed/broadband modem

•Telephone

•Ethernet cable that goes from your modem to your

computer or router

Step 1:

Vonage Device

Wireless

Phone

Internet

Ethernet

Power

Black Power Cord

Base Support*

Blue Cable Yellow Cable

Vonage Device

Wireless

Phone

Internet

Ethernet

Power

Black Power Cord

Base Support*

Blue Cable Yellow Cable

Step 2:

Set up your Vonage®Device

1. Unplug your existing modem’s power cord.

Leave your modem connected to your cable or DSL

phone line that supplies your Internet connection.

2. Unplug the Ethernet cable that connects your modem to

your computer or router. Unplug the cable from both

your modem and your computer (or router).

Note: In some instances the modem may be connected to the computer

via a USB cord and USB ports. If so, disconnect the cord at both ends

(modem and computer).

3. Wait 60 seconds for your modem to clear its

memorycompletely.

Existing Modem

Ethernet

Port

USB Port

4. Connect one end of the blue cable to the Ethernet port

on your modem. Connect the other end to the blue port

labeled “Internet” on the back of the Vonage Device.

5. Connect one end of the yellow cable to the yellow port

labeled “Ethernet 1” on the back of the Vonage Device.

Connect the other end to the Ethernet port on your

computer or router that you unplugged earlier.

NOTE: If you unplugged a USB cord, do not attempt to plug the Ethernet cord into

the USB port. If your computer does not have an Ethernet port, you can purchase

aUSB-to-Ethernet adapter or Ethernet card at your local electronics store.

Vonage Device

6. Now plug your modem’s power cord back into an

electrical power outlet.

NOTE: You should allow enough time for your modem to complete its start-up

process. If you’re unsure about how long this takes, consult the manual that

came with your modem. Typical modem start-up takes 60 seconds.

7. Next, using the power cord that came with your Vonage

kit, plug the smaller end of the power cord into the

circular power port on the back of the Vonage Device.

Then, plug the larger end of the power cord into an

electrical power outlet.

NOTE: Beforecontinuing, the “Power” and “Internet” lights on the front of the

Vonage Device should both turn on. Wait until the “Power” light stops blinking

and both “Power” and “Phone 1” lights are solid. The “Phone 2” light will be

solid if you have a second Vonage line. Otherwise, it will not light. The “Internet”

light will flicker whenever there is communication activity.

8. On your computer, open a web browser and check your

Internet connection by visiting any website.

NOTE: After turning on your computer, the Ethernet light on the Vonage Device

will also flicker whenever there is communication activity.

•If your Internet connection works,

go to Step 3: Connecting your phone, on page 7.

Vonage Device

1. Unplug the modem for at least 60 seconds. If left off for

less than 60 seconds, it might still “remember” old

information that could prevent it from working properly.

2. If your Internet connection still does not work, you may

need to register your Vonage Device with your cable

provider. You will need the WAN MAC ID on the bottom

of the Vonage Device.

1. Make sureyou are using a computer that's connected to a yellow

port on your Vonage Device. On your computer, open a web

browser. In the address field, type http://192.168.15.1 (the

default IP address of the VT2542 Home Page) and press Enter.

Alogin window appears.

2. In both the Username and Password fields, type router and click

3. Click the Setup tab, then WAN Configuration.From the Type

drop-down list, choose PPPoE.

4. In the Username and Password fields, type the username and

password you normally use to login to your DSL service. If you

don’thave your DSL login information, please contact your ISP

and obtain the DSL username/password.

5. In the Keep Alive field, type 0to ensurethat your DSL link is

always active.

6. Click Save and then Connect.

7. Click the Tools tab and click Restart on the left. Click the

Restart button.

If your Internet connection doesn’t work and

you have a cable modem:

If your Internet connection doesn't work and

you have a DSL modem:

Note: If you had an existing router connected to your DSL modem,

but it is now connected to your Vonage device, the router will have

to be set up as a DHCP client instead of PPPoE.

Connecting your phone

1. Plug a standard telephone cord into your phone.

NOTE: If not done so already, disconnect phone cord from wall.

2. Plug the other end into the Green Phone 1 Port

on the back of the Vonage Device.

NOTE: Make sure the phone light is solid.

This is what your setup should look like:

3. Pick up your handset. If you hear a dial tone, congratulations!

You’ve set up your Vonage service correctly,and can now start

making calls. To configure your voicemail and other included

services features, simply login to your web account at

www.vonage.com. In Canada visit www.vonage.ca.

NOTE: When you pick up your phone to check for a dial tone, the phone light will blink.

If you do not hear a dial tone, proceed to Troubleshooting

Tips on page 10. 7

Step 3:

Vonage Device

Existing

Modem Phone

Computer

(OR Router)

The default name of your wireless network is ‘MOT-1-xx.’

To change the default settings and enable security

encryption (highly recommended) see the VT2542 User

Guide, located at www.vonage.com/vt2542 (U.S.) or

www.vonage.ca/vt2542 (Canada).

Note: The Vonage Device is a wireless B/G Router,with wireless turned

on by default. This means that if you have a computer that’swireless B

or G, you can take advantage of your new Wi-Fi network immediately

and connect your computer wire-free. When your Wi-Fi computer is in

range, it will connect automatically to your new ‘MOT-1-xx’ (xx refers to

the last two digits on the wireless MAC ID) Wi-Fi network. Because your

Vonage device is wireless, it is not required that you have a computer

physically connected to your Vonage Device for it to work.

Wireless Networking

Your Vonage®Device is also a wireless router.

Wireless

Phone

Internet

Ethernet

Power

Inhaltsverzeichnis

Andere Motorola Adapter Handbücher

Motorola

Motorola TER-NUSB1 Bedienungsanleitung

Motorola

Motorola MoCA MM2025 Bedienungsanleitung

Motorola

Motorola HS830 HANSFREE Bedienungsanleitung

Motorola

Motorola ARRIS SURFboard SBM1000 Series Bedienungsanleitung

Motorola

Motorola HS830 HANSFREE Bedienungsanleitung

Motorola

Motorola MPMC101 Kurzanleitung

Motorola

Motorola RMN5104 Bedienungsanleitung

Motorola

Motorola LPCI810 Bedienungsanleitung

Motorola

Motorola M68CPA08QF80 Bedienungsanleitung

Motorola

Motorola HLN9742 Bedienungsanleitung

Motorola

Motorola QG-USB Bedienungsanleitung

Motorola

Motorola Motostart D200 Bedienungsanleitung

Motorola

Motorola MA1 Bedienungsanleitung

Motorola

Motorola LA-5137 Kurzanleitung zur Einrichtung

Motorola

Motorola PMLN6396 Bedienungsanleitung

Motorola

Motorola WN825G Bedienungsanleitung

Motorola

Motorola WN825G Bedienungsanleitung

Motorola

Motorola DC800 Bedienungsanleitung

Motorola

Motorola WU830G Bedienungsanleitung

Motorola

Motorola D650 Bedienungsanleitung

Motorola

Motorola D670 Montageanleitung

Motorola

Motorola SURFboard SBM1100 Bedienungsanleitung

Motorola

Motorola UTA220/UTA220k Bedienungsanleitung

Motorola

Motorola BT06 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung