DS6708 Poster
BLACK
PANTONE 285
http://www.motorolasolutions.com/ds9208
PerforationPerforation
DS9208
DS9208
DS6708 Poster
DS9208
012345
OPTIMUM ARM POSITION AVOID EXTREME WRIST ANGLES
Low/medium/high beep
Power up
Short medium beep
Bar code decoded
4 long low beeps
Standard Use Hand-Held Scanning
High/low beep Low/high beep
High/low/high/low beep
Parameter Menu Scanning
BEEPER INDICATIONS LED INDICATIONS
Off Green Red
Hands-Free (Presentation) Scanning
Off Off MomentarilyGreen Red
Transmission Error
Local Contact:
OPTIMUM SCANNING
AVOID BENDING AND REACHING
REGULATORY INFORMATION
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow
the recommendations below. Consult with your local Health & Safety Manager to
ensure that you are adhering to your company's safety programs to prevent
employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
This device is approved under Symbol Technologies, Inc., a Zebra Technologies
company. This guide applies to Model Number DS9208.
All Zebra devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
Local language translations are available at the following website:
http://www.motorolasolutions.com/support.
Any changes or modifications to Zebra equipment, not expressly approved by
Zebra, could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 40oC / 104oF.
LED Devices
Complies with IEC/EN60825-1:2001 & EN 62471: 2006 and IEC62471: 2008.
AVOID REACHING
AVOID BENDING
Recommended Usage Guide
AVOID EXTREME WRIST ANGLES
72-140088-02 Revision A December 2014
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol
logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies
company.
© 2014 Symbol Technologies, Inc.
© 2014 Symbol Technologies, Inc.
Zebra reserves the right to make changes to any product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use
of any product, circuit, or application described herein. No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in which Zebra products might
be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra
products. Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a
registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.
This Zebra Product may include Zebra Software, Commercial Third Party Software, and Publicly
Available software. Refer to Product Reference Guide for complete copyright, conditions and disclaimer
information.
Waste Electrical and Electronic Equipment (WEEE)
Tested to comply
with FCC Standards
FOR HOME OR OFFICE USE
Radio Frequency Interference Requirements
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements – Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this device is in compliance with all the applicable
Directives, 2004/108/EC and 2006/95/EC. A Declaration of Conformity may be
obtained from http://www.motorolasolutions.com/doc.
EAS
System integrator to ensure final product is compliant with all applicable EU
Directives.
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラスB情
報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラ
ジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをして下さい。
Korea Warning Statement for Class B ITE
사용자 안내문
이 기기는 가정용(B급)으로 전자파적합등록을
한 기기로서 주로 가정에서 사용하는 것을 목적
으로 하며, 모든 지역에서 사용할 수 있습니다.
기 종별
B급 기기
(가정용 방송통신기기)
Hands-Free Scanning
123SCAN2
123Scan2is an easy-to-use, PC-based software tool that enables rapid and easy customized setup via a bar code or USB cable. For more information, visit: http://www.motorolasolutions.com/123Scan2.
Aiming
Hand-Held Scanning
Caution - use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous light exposure.
Alternate left and right hands taking
breaks and task rotation recommended
Transmission error
detected; data is ignored
Successful parameter
setting
Correct programming
sequence performed
Incorrect programming
sequence or “Cancel”
bar code scanned
Scanner is on and ready
to scan, or no power to
scanner
Bar code is successfully
decoded
Transmission error
No power to scanner Scanner is ready to scan Bar code is successfully
decoded
Ukraine
This equipment corresponds to requirements of the Technical Regulation
No. 1057, 2008 on restrictions as to the use of some dangerous substances in
electric and electronic devices.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.motorolasolutions.com/warranty.
For Australia Only
This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson
Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees
that cannot be excluded under the Australia Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Zebra Technologies Corporation Australia’s limited warranty above is in addition
to any rights and remedies you may have under the Australian Consumer Law. If
you have any queries, please call Zebra Technologies Corporation at+65 6858
0722. You may also visit our website: http://www.zebra.com for the most updated
warranty terms.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or
Systems Support. If there is a problem with the equipment, they will contact Zebra
Support at: http://www.motorolasolutions.com/support.
For the latest version of this guide go to: http://www.motorolasolutions.com/support.
Power Supply
Use ONLY a LISTED
Zebra
, Type no. PWRS-14000 (5Vdc, 850mA), direct plug-in power supply, marked Class
2 or LPS (IEC60950-1, SELV). Use of alternative Power Supply will invalidate any approvals given to this unit
and may be dangerous.
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
Zebra
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
http://www.motorolasolutions.com/recycling/weee.
