Motorola H700 - H700 Bedienungsanleitung
ark
ive
nc.
rks
motorola
H700
Bluetooth®
Wireless Headset
H700
CFJN2244C – 07/2006
1
Figure 1
3
4
5
6
1
2
2
Figure 3
Figure 2
3
English
General and safety information
European Union Directives Conformance Statement
Hereby, Motorola declares that this product (“H700”) is in compliance with:
• The essential requirements of European Union Directive
1999/5/EC
• All other relevant EU Directives
You can view your product's Declaration of Conformity (DoC) to Directive
1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the
product with household waste.
Recycling Mobile Phones and Accessories
Do not dispose of mobile phones or electrical accessories, such as
chargers or headsets, with your household waste. In some countries or
regions, collection systems are set up to handle electrical and electronic
waste items. Contact your regional authorities for more details. If collection
systems aren’t available, return unwanted mobile phones or electrical
accessories to any Motorola Approved Service Centre in your region.
FCC Notice to Users
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
See-47-CFR-Sec.-15.21.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).
4
English
Initial set up
Welcome to the world of Motorola digital wireless communications! We are
pleased that you have chosen the Motorola H700 Bluetooth®Hands-free
Headset.
Before you begin
Take a moment to familiarize yourself with your H700 headset.
See figure 1 on page 1.
1 Earhook
2 Volume buttons
3 Call button
4 Multicolor indicator light
5 Microphone
6 Headset boom
Charging your headset
See figure 2 on page 2.
First time use: Charge your headset for 2 hours.
Recharging: When you hear 5 rapid high tones through the headset speaker
repeated at 60-second intervals, the headset battery needs to be recharged.
Note: the headset is not functional while charging.
The rechargeable battery that powers this product must be disposed
of properly and may need to be recycled. Contact your local
recycling center for proper disposal methods. Never dispose of
batteries in fire because they may explode.
Wearing the headset
You can wear your H700 headset on your left of right ear. The headset
comes ready for the right ear.
Placing the headset on your ear: refer to figure 3 on page 2.
Placing the headset on the left ear
• Open the earhook 90°
• Detach the earhook from the hinge pin.
5
English
Changing volume button orientation
If you change your headset to wear it on the other ear, you can also change
the orientation of the volume buttons.
With the headset off (boom closed), press the Call button until the light
turns on. Then, press the Volume button that you would like to assign as
“volume up” button. The headset flashes twice and goes back in sleep
mode. Turn the headset on (boom opened).
Pairing your headset and phone
Your phone’s Bluetooth feature is off by default. Make sure the Bluetooth
feature is permanently turned on in your phone. Please check your phone’s
user’s guide.
Before you can use your headset, you must pair (link) it with your phone.
1. With the headset turned off (boom closed), press and hold the Call
button for 5 seconds until the indicator light turns on and remain steadily
lit in purple.
2. Release the Call button and immediately open the headset boom. The
indicator light remains lit in purple.
3. Perform a device discovery (or scan) from the phone. For details about
device discovery, consult your phone’s user’s guide. The phone lists
Bluetooth devices it finds.
4. Select Motorola H700 in the list of discovered devices and confirm by
following the on-screen prompts.
5. When prompted by the phone, enter the passkey 0000 and confirm.
When your headset successfully pairs with your phone, the indicator light
changes from steadily to flashing blue.
After you have successfully paired your phone and headset, you do not
need to repeat these steps each time you use the headset.
6
English
SmartFind feature
The headset goes automatically in discoverable mode when powered
on the first time or in case it can not connect to the device it has been
previously paired with. In these instances, the pairing can be done directly
on the phone without manually placing the headset in pairing mode.
Test and use
Your phone and headset are now paired and ready to make and receive
calls. To confirm they are successfully paired and operating properly, make
a call from you phone. You will hear ringing from the headset.
Paired link to additional devices
Your headset can store pairing information for up to 8 different devices
in chronological order. When an attempt to pair to more than 8 devices is
made, the oldest paired device is removed from the list.
The headset will automatically initiate a connection with the last device it
was connected to either by powering up the headset or by pressing the Call
button. If you want to connect the headset to another device in the paired
device list, you must initiate the connection from that device. Whichever of
the 8 devices initiates a connection to the headset afterwards, that device
then becomes the “last connected” device.
7
English
Using your headset
Turning your headset on & off
To turn your headset on, open the headset boom. The indicator flashes
blue.
To turn your headset off, close the headset boom. The indicator turns off.
Making & receiving calls
Function Action
Receive a call Open the headset boom and tap the Call button
End a call Tap the Call button
Reject a call Press and hold the Call button until you hear a
beep
Redial last call Press and hold the Call button until you hear a
beep
Make a voice dial call Tap the Call button and speak the name after
the tone
Transfer a call from the phone to the Open the headset boom
headset
Answer a second incoming call Press and hold the Call button until you hear a
Put active call on hold beep (The 1st call is placed on hold).
Toggle between two active calls Press and hold the Call button until you hear a
beep
Join a 3 way call (note: feature is Press and hold both volume buttons
phone/network dependent)
Disable the indicator light Press and hold both volume button for 5 to 6
seconds
Mute or un-mute a call Tap both Volume buttons
Your headset supports both hands-free and headset profiles. Accessing
call functions depend upon which profile your phone supports. See your
phone’s user’s guide for more information.
8
English
Indicator lights
The indicator light provides information about your headset status.
With the charger plugged in:
Headset indicator Headset status
Red (steady) Charging (less than 80% charged)
Yellow (steady) Charging (more than 80% charged)
Green (steady) Charging complete
With no charger plugged in:
Headset indicator Headset status
Off Power off
Purple (steady) Pairing mode
Red (steady) Battery low
Blue (10 rapid flashes) Pairing successful
Blue (Quick flash) Standby (not on a call)
Blue (Slow pulse) Connected (on a call)
Note: after 5 minutes of inactivity, the light stop flashing to conserve power,
but the headset is in standby mode. Any button press on the headset will
re-awaken the headset and the flashing resumes.
9
English
Audio tones
The audio tones provide information about your headset status.
Audio tone Headset status
Single high tone when pressing Volume at minimum or maximum
volume button
5 rapid high tones repeated Low battery
every 60 seconds
No audio indications: deteriorating quality Out of range
Ring tone Incoming call
Single high tone Pairing confirmation
Single low tone Voice activation
Dual high/low tone Voice tag not recognized
Single high tone End call
Low to high tone Phone network not available
2 ascending tones Mute enabled
2 descending tones Mute disabled
Troubleshooting
My phone does not find my headset: make sure the blue light on your
headset is steadily lit when you phone is searching for devices
My headset worked before but now it is not working: Make sure the
Bluetooth feature is turned on in your phone. If the Bluetooth feature has
been turned off or was turned on temporarily, you may need to restart the
Bluetooth feature and pair your phone and headset again.
If you have any additional questions, please call your hotline number
(0870-9010-555) or visit us at www.hellomoto.com.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Motorola Headset Handbücher
Motorola
Motorola H270 - Headset - Over-the-ear Bedienungsanleitung
Motorola
Motorola Core Ultra-Lite PMLN5102 Bedienungsanleitung
Motorola
Motorola MOTOSTART HS815 Bedienungsanleitung
Motorola
Motorola HK255 Bedienungsanleitung
Motorola
Motorola Miniblue H5 Bedienungsanleitung
Motorola
Motorola 6803578F47 Bedienungsanleitung
Motorola
Motorola HS801 Bedienungsanleitung
Motorola
Motorola HK250 Bedienungsanleitung
Motorola
Motorola PMLN5277 Bedienungsanleitung
Motorola
Motorola H520 Bedienungsanleitung
Motorola
Motorola H720 Bedienungsanleitung
Motorola
Motorola H620 - Headset - Over-the-ear Bedienungsanleitung
Motorola
Motorola PMLN7632 Bedienungsanleitung
Motorola
Motorola H385 Bedienungsanleitung
Motorola
Motorola HX520 Bedienungsanleitung
Motorola
Motorola Tracks Air Bedienungsanleitung
Motorola
Motorola H790 - Headset - Monaural Bedienungsanleitung
Motorola
Motorola H790 - Headset - Monaural Bedienungsanleitung
Motorola
Motorola H390 - Headset - In-ear ear-bud Bedienungsanleitung
Motorola
Motorola HK500 Bedienungsanleitung
