Motorola Avigilon HD-NVR4-STD-16TB Bedienungsanleitung

Installation Guide

Avigilon Network Video Recorder

HD-NVR4-STD-16TB, HD-NVR4-STD-24TB, HD-NVR4-STD-

32TB and HD-NVR4-STD-48TB

CENTER and AVIGILON APPEARANCESEARCH are trademarks of Avigilon Corporation. Other names or

logos mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™

and ® in proximity to each trademark in this document or at all is not a disclaimer of ownership of the related

trademark. Avigilon Corporation protects its innovations with patents issued in the United States of America

and other jurisdictions worldwide (see avigilon.com/patents). Unless stated explicitly and in writing, no

license is granted with respect to any copyright, industrial design, trademark, patent or other intellectual

property rights of Avigilon Corporation or its licensors.

This document has been compiled and published using product descriptions and specifications available at

the time of publication. The contents of this document and the specifications of the products discussed

herein are subject to change without notice. Avigilon Corporation reserves the right to make any such

changes without notice. Neither Avigilon Corporation nor any of its affiliated companies: (1) guarantees the

completeness or accuracy of the information contained in this document; or (2) is responsible for your use

of, or reliance on, the information. Avigilon Corporation shall not be responsible for any losses or damages

(including consequential damages) caused by reliance on the information presented herein.

Avigilon Corporation

avigilon.com

PDF-NVR4STD-A

Revision: 2 - EN

20200110

Table of Contents

Introduction 1

Before YouStart 1

Overview 1

Front View 1

Back View 2

Installation 4

Package Contents 4

Installing the Rack Rails and Cable Management Arm 4

Connecting Cables 4

Installing the Bezel 4

Configuring Windows 10 5

Activating and Configuring ACC™ Software 6

Troubleshooting 6

Network Configuration 6

Checking System Health 6

Operating System Recovery By Avigilon Recovery Partition 6

Operating System Recovery By External USB 7

Advanced Features 9

Checking System Health 9

Replacing a Hard Drive Blank 10

Replacing Front or Back Hard Drives 11

LED Indicators 13

Diagnostic Indicators 13

Power Status Indicators 13

Network Link Status Indicators 14

Hard Drive RAID Status Indicators 15

For More Information 16

iii

Introduction

The Avigilon Network Video Recorder is preloaded with the Avigilon Control Center software and is

configured for maximum performance and reliability. The Network Video Recorder can be easily integrated

into any existing Avigilon security system, or act as the base of a new site.

Before YouStart

Avigilon recommends the use of an uninterruptible power supply (UPS) system to protect your video

surveillance system hardware. A UPS system is used to protect critical equipment from mains supply

problems, including spikes, voltage dips, fluctuations and complete power failures using a dedicated

battery. It can also be used to power equipment during the time it takes for a standby generator to be

started and synchronized.

Any UPS connection must include configuration to shut down the Windows operating system on the

appliance when battery power is low or there is 15 minutes of power remaining.

It is recommended that cameras not be connected to the appliance until after the appropriate network

configuration has been set up.

Overview

Front View

Introduction 1

1. Bezel

Protects against unauthorized physical access to the hard drives.

2. Power button

Controls the power supply to the recorder.

3. Hard drives

Provides access to hot-swappable hard drives. There are LED indicators on each hard drive.

Some drives may contain an empty hard drive tray.

4. Diagnostic indicators

Provides information about system operations.

For more information, see LED Indicators on page13.

5. Video connector

Accepts a VGA monitor connection.

6. Information tag

Provides the product service details and support information.

Back View

1. Out-of-Band Management (OOBM) connector

Accepts an OOBM RJ-45 connection.

2. Serial connector

Accepts connections to serial devices.

3. Video connector

Accepts a VGA monitor connection.

4. USB connectors

Accepts USB connections to external devices.

5. RJ-45 1 Gbps Ethernet ports (4)

Accepts Ethernet connections to multiple networks.

Back View 2

6. Power supply

Power supply unit.

Back View 3

Installation

Package Contents

Ensure the package contains the following:

lAvigilon Network Video Recorder

lRack sliding rail assembly kit

lCable management arm assembly kit

lBezel and key

lPower cable

Installing the Rack Rails and Cable Management Arm

If the recorder will be kept in a server rack, install the Rack Sliding Rails and the Cable Management Arm

provided in the recorder package. Follow the procedures outlined in the Rack Installation Instructions and

the CMA Installation Instructions provided in the assembly kits.

Note: The supplied Rack Sliding Rails are compatible with square and round hole racks.

Connecting Cables

Refer to the diagrams in the Overview section for the location of the different connectors. Make the

following connections as required:

1. Connect a KVM switch or separate keyboard, mouse and monitor to the recorder.

lThe keyboard and mouse can be connected to any USB port on the recorder.

lThe monitor can be connected to any video connector at the front or back of the recorder.

2. Connect the recorder to your network using an Ethernet cable.

3. Connect a power cable to the power supply at the back of the recorder.

4. Press the power button on the front of the recorder. Check that the recorder LED indicators display

the correct status.

Installing the Bezel

The bezel can be installed on the front of the recorder to help protect the hard drives against unauthorized

access.

Installation 4

1. Align and insert the right end of the bezel until it clicks into place.

2. Push the left end of the bezel into the front of the unit until it clicks into place.

3. Use the provided key to lock the bezel.

Configuring Windows 10

After the recorder starts, you will need to configure the Windows operating system for the first time.

1. On the first screen, the MICROSOFT SOFTWARE LICENSE TERMS and AVIGILON CONTROL

CENTER™ SOFTWARE END USER LICENSE AGREEMENT are displayed. Review the terms and click

Accept.

2. Select Join a local Active Directory domain.

Note: This prompt appears only if an Active Directory is present on the network. See the

Windows Help and Support files for more information.

3. Enter a user name for accessing the Windows software.

4. Enter a password and password hint for the user name and click Next.

5. After a minute, choose the ACC version in use at your site.

You are logged in to the Windows environment. The Avigilon Control Center Admin Tool

automatically starts up.

Configuring Windows 10 5

Note: If you are performing operating system recovery, the Avigilon Control Center Admin

Tool does not automatically start up. For more information about running the local ACC

installer, see Operating System Recovery By Avigilon Recovery Partition below.

Proceed to activate the license for the Avigilon Control Center software on your Network Video Recorder.

Activating and Configuring ACC™ Software

For information about activating licenses, configuring sites, logging in to a site, and administering your

version of the Avigilon ACC software, see the following guides:

lAvigilon ACC Initial System Setup and Workflow Guide

lAvigilon ACC Client User Guide

These guides are available on the Avigilon website: avigilon.com/support-and-downloads.

Troubleshooting

Network Configuration

By default, the Network Video Recorder acquires an IP address on the network through DHCP. If you need

to set up the recorder to use a static IP address or any specific network configuration, see the Windows

Help and Support files for more information.

Checking System Health

You can check on the health of the system components in the Site Health in the ACC Client software. See

the Windows Help and Support files for more information.

Operating System Recovery By Avigilon Recovery Partition

If you need to recover the Windows operating system, the NVR4 Value includes an onboard Avigilon

recovery partition that is separate from the operating system partition. The advantage of using the Avigilon

recovery partition is that you do not need an internet connection.

Important: Your operating system drive will be erased and restored to factory settings. Before you

proceed with operating system recovery, complete any necessary backups of custom ACC

configuration and video recordings. For more information about ACC software backups, see

http://avigilon.com/recovery.

Activating and Configuring ACC™ Software 6

Note: Depending on when your NVR4 Value was shipped, it is recommended that you connect to

the network when possible to install updates for Windows and ACC Client software after system

recovery is completed. For more information about ACC software installations, see

http://avigilon.com/recovery.

1. Start operating system recovery in one of the following ways:

lOn your Windows desktop, select and then hold down the Shift key and select Restart.

lOn your locked Windows screen, select and then hold down the Shift key and select

Restart.

lDuring direct boot of the operating system, repeatedly press the down-arrow key and select

the partition.

2. On the Choose an option screen, select Use another operating system.

3. Select the OS Recovery partition.

4. On the Avigilon Recovery window, select Recover.

Allow up to half an hour for the recovery to complete.

5. After system reboot, complete the Windows setup process. For more information, see Configuring

Windows 10 on page5.

6. Navigate to C:\Avigilon\Control Center Installation Files, and run the ACC installer

for the version of ACC software in use at your site.

Operating System Recovery By External USB

Alternatively if you need to recover the Windows operating system on the and you have access to the

internet, it is recommended that you download the latest Avigilon Recovery Image from

http://avigilon.com/recovery and refer to Support and Downloads for the following information:

Operating System Recovery By External USB 7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Motorola Netzwerk-Hardware Handbücher

Motorola

Motorola PTP-SYNC Bedienungsanleitung

Motorola

Motorola DSP96002ADM Bedienungsanleitung

Motorola

Motorola Avigilon 3 Series Bedienungsanleitung

Motorola

Motorola CB3000 - Client Bridge - Wireless Access... Bedienungsanleitung

Motorola

Motorola DSR-4410MD Handbuch

Motorola

Motorola Avigilon HD-NVR4-PRM-64TB Bedienungsanleitung

Motorola

Motorola PTP 600 Series Kurzanleitung

Motorola

Motorola M68MM01 Bedienungsanleitung

Motorola

Motorola VAP2404 Bedienungsanleitung

Motorola

Motorola PTP 500 Bedienungsanleitung

Motorola

Motorola CPEi 825 Series Betriebsanleitung

Motorola

Motorola Avigilon HD-NVR3-VAL-3TB Bedienungsanleitung

Motorola

Motorola MOTOWI 4 Bedienungsanleitung

Motorola

Motorola MOTOMESH DUO 4300 Bedienungsanleitung

Motorola

Motorola CPEo 400 Series Bedienungsanleitung

Motorola

Motorola PTP 58500 Bedienungsanleitung

Motorola

Motorola PMP 58430 Bedienungsanleitung

Motorola

Motorola 68436 - Vanguard 100I - Remote Access Server Installationsanleitung

Motorola

Motorola WS200 Bedienungsanleitung

Motorola

Motorola Dimetra KVL 4000 Air Bedienungsanleitung

Motorola

Motorola SC 4812T-MC Handbuch

Motorola

Motorola NE 1000 Bedienungsanleitung

Motorola

Motorola SV-4250-P-1 - AirDefense Enterprise Appliance... Bedienungsanleitung

Motorola

Motorola PTP 400 Series Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung