Motorola RS309 Bedienungsanleitung

RS309 Scanner

Quick Reference Guide

2 RS309 Scanner

Motorola reserves the right to make changes to any product to improve reliability,

function, or design.

Motorola does not assume any product liability arising out of, or in connection

with, the application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise

under any patent right or patent, covering or relating to any combination, system,

apparatus, machine, material, method, or process in which Motorola products

might be used. An implied license exists only for equipment, circuits, and

subsystems contained in Motorola products.

MOTOROLA, the Stylized M Logo and Symbol and the Symbol logo are

registered trademarks of Motorola, Inc. Other product names mentioned in this

manual may be trademarks or registered trademarks of their respective

companies and are hereby acknowledged.

Motorola, Inc.

One Motorola Plaza

Holtsville, N.Y. 11742-1300

http://www.symbol.com

Warranty

For the complete Motorola hardware product warranty statement, go to:

http://www.symbol.com/warranty.

Patents

This product is covered by one or more patents. For patent information go to:

http://www.symbol.com/patents.

Quick Reference Guide 3

Introduction

The RS309 is a modular, wearable laser scanner that provides the operator with

unencumbered bar code scanning capability. The RS309 is used with the

WT4070/90 wearable terminal.

The operator wears the RS309 on the back of the hand and uses a

thumb-activated trigger to operate the scanner. An interface cable connects the

RS309 to the wearable terminal. Power for the RS309 is provided by the wearable

terminal.

Scan LED

Trigger

Connector

Protective Cap

Exit Window

Interface

Connector

Scan Button

Trigger Cable

Interface Cable (accessory)

4 RS309 Scanner

Installation

The RS309 connects to the wearable terminal and mounts on the back of the

hand using the RS309 Glove.

1. Connect the RS309 trigger cable to the back of the RS309.

2. Connect the RS309 interface cable to the back of the RS309.

3. On the wearable terminal, remove the connector cap covering the cable

connector.

NOTE There are two interface cables available. The standard interface

cable connects the RS309 to a wearable terminal mounted on the

arm. The extended length interface cable connect the RS309 to a

wearable terminal mounted on the hip.

Trigger Connector

Interface Connector

Quick Reference Guide 5

4. Connect the other end of the RS309 interface cable to the wearable terminal

cable connector. If the wearable terminal is mounted on the arm, connect the

cable to the cable connector closest to the wrist.

5. Mount the RS309 on the RS309 Glove. Refer to the RS309 Glove Installation

Guide for information on mounting the RS309.

6. Slide the trigger strap on the index finger, with the button positioned next to the

thumb, and adjust the strap.

7. Warm boot the wearable terminal.

Interface Cable Cable Connector

6 RS309 Scanner

Using the Scanner

To scan bar codes:

1. Turn on the wearable terminal.

2. Launch a scanning application.

3. Press the scan trigger and aim the RS309 at a bar code. The LED turns red to

indicate the RS309 is on.

4. Adjust the aim so that the thin, red laser beam covers the entire length of the

bar code.

5. If the decode is successful the LED turns green. The terminal beeps if

programed accordingly.

Scanning Tips

• For larger bar codes, hold the RS309 farther away from the bar code.

• For bar codes with bars that are closer together, hold the RS309 closer to the

bar code.

• The optimal scanning distance varies with bar code density, but 10 to 25 cm (4

to 10 inches) generally works. Practice to determine what distances to work

within.

• Position the scanner at an angle to the bar code. If the scanner is

perpendicular to the bar code being scanned, light can bounce back into the

scanner’s exit window and prevent a successful decode.

Right

012345

Wrong

012345

Quick Reference Guide 7

RS309 Freezer Version

The RS309 Freezer version provides unencumbered bar code scanning capability

in cold environments. Two desiccant packs must be inserted inside the scanner to

prevent condensation in the exit window.

These packs require replacement; how frequently depends on your environment.

Additional packs can be ordered from Motorola.

Inserting the Desiccant Packs

To insert or replace the desiccant packs:

1. Insert a coin into the slit on the round access cover, and turn the coin

counter-clockwise 45°.

2. Remove the cover.

3. If there are existing desiccant packs inside, carefully remove them and discard

properly.

4. Remove the new desiccant packs from the sealed plastic bag.

5. Insert the new packs into the scanner.

NOTE The RS309 Freezer version is shipped with desiccant packs in a

sealed plastic bag. Be sure to insert the packs provided before using

the scanner.

8 RS309 Scanner

6. To replace the access cover, align the knobs on the cover with the notches

inside the desiccant well, and turn the cover clockwise 45° using the coin.

Replacing the Protective Cap

To replace the protective cap that covers the RS309:

1. Remove all cables connected to the RS309 and remove the RS309 from any

mounting equipment.

2. Push up on the recesses between the protective cap and the scanner (located

underneath the exit window) until the tabs on the scanner pop out.

3. Lift the protective cap off the RS309.

4. Slide the RS309 into the back of the new protective cap so the connectors

appear through the back opening of the protective cap.

5. Push the front of the RS309 into the protective cap until it snaps into place.

Recess Area

Tabs

Quick Reference Guide 9

Cleaning

Wipe the exit window periodically with a lens tissue or other material suitable for

cleaning optical material, such as eyeglasses.

Troubleshooting

CAUTION Do not pour, spray, or spill any liquid on the scanner.

Symptom Probable Cause Action

Laser beam does not

display when

pressing the trigger.

Interface cable is not

secure.

Verify that the interface cable

connections are connected

properly.

Power is not applied to

RS309.

Power for the RS309 is provided

by the wearable terminal. Verify

that the wearable terminal is on

and that it has a charged battery

installed.

Scan enabled application

on the wearable terminal is

not running.

Launch scanning application on

the wearable terminal.

Wearable terminal does not

recognize the RS309

scanner.

On the wearable terminal,

perform a warm boot.

RS309 does not

decode a bar code.

Bar code is unreadable. Verify that the bar code is not

defective.

Exit window is dirty. Clean exit window with a lens

tissue. Tissues for eyeglasses

work well. Do not use tissues

coated with lotion.

Symbology is not enabled. See your system administrator.

10 RS309 Scanner

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

CAUTION In order to avoid or minimize the potential risk of ergonomic injury

follow the recommendations below. Consult with your local Health &

Safety Manager to ensure that you are adhering to your company’s

safety programs to prevent employee injury.

Inhaltsverzeichnis

Andere Motorola Scanner Handbücher

Motorola

Motorola DS4208 Bedienungsanleitung

Motorola

Motorola Symbol MS4404 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3408 Bedienungsanleitung

Motorola

Motorola DS9208-1D Installations- und Betriebshandbuch

Motorola

Motorola DS3508 Installations- und Betriebshandbuch

Motorola

Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz Bedienungsanleitung

Motorola

Motorola RS507 Series Bedienungsanleitung

Motorola

Motorola Symbol CS3000 Series Bedienungsanleitung

Motorola

Motorola Symbol LS3408 Installations- und Betriebshandbuch

Motorola

Motorola SE4750 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol CS3000 Series Bedienungsanleitung

Motorola

Motorola Symbol MiniScan MSXX07 Series Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol CS3000 Series Installations- und Betriebshandbuch

Motorola

Motorola Symbol CS3070 Bedienungs- und Wartungshandbuch

Motorola

Motorola Symbol CS3000 Series Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung