Motorola DTR600 Gebrauchs- und Pflegehandbuch

Motorola DTR600/700/720 series two-way radio

Firmware Update info

6-July-2020

DTR600/700/720 two-way radios firmware to be updated to:

Firmware Version: R01.02.02

Codeplug Version: R01.02.01

Keypad Version: R01.02.00

Affected Tanapa :

SUPER TANAPA

Tanapa

Sales Model

PMUF1952A

PMUF1953A

DTS130NBDLAA

PMUF1954A

PMUF1955A

DTS150NBDLAA

PMUF1956A

PMUF1957A

DTS1504BDLAA

PMUF1958A

PMUF1959A

DTS1505BDLAA

PMUF1960A

PMUF1961A

DTS1502BDLAA

PMUF1962A

PMUF1963A

DTS150PBDLAA

FW R01.01.02 provides enhancement listed below:

1. Fixed Renoir freeze screen issue.

Note: When the issue happens, the radio's screen freezes but the radio is

still able to transmit call, receive call and can power down radio via on/off

button.

2. “Enable Profile ID pin” setting for DTR600 is changed to

enable/checked in factory settings. No change on DTR700 and

DTR720.

Note: New factory settings will only take place if users upgrade firmware

with “Restore Radio’s personality” NOT select.

Equipment/Tools needed to perform software update

1. Prepare the below equipment.

a. CPS Cable kit is HKKN4027A.

b. Single Unit Charger/docking station PMPN4468A.

Computer System Requirements

1. Computer with Windows 10 operating system.

2. Computer with USB port.

Note

1. Only 1 radio can be updated at any one time.

2. Please ensure radio battery is fully charged before update commences.

Setup Steps (one time)

1. Connect the programming kit docking/charging station to computer using the USB

programming cable from the programming kit.

2. On the programming cable HKKN4027A, please make sure to set the mode switch to

Digital CPS.

3. Observe your computer will scan and install the programming cable driver automatically

at the background (task tray for Windows computer). This will take a while.

4. Please wait until the driver installation is completed.

5. Download and double click to install the Update Tool application (provided by Motorola

Team) into the computer.

6. Click “Next” to install proceed installation.

7. Click to accept the agreement and click “Next”.

8. Click “Next” to install DTR Update Tool in default location in your computer.

9. Click “Next” to select the default program folder.

10. Click “Next” to proceed the install type.

11. Click “Install” to proceed installation.

12. The installation will take a few minutes.

13. Once the installation is finished, check the checkbox to run the Update Tool now. Then

click “Finish”.

14. This ends your one time setup steps.

Steps to update radio firmware from R01.00.02 to R01.02.02 (Same

before startsteps for R01.01.00 to R01.02.01)

1. Before starting, ensure no other USB devices are plugged into your computer except

keyboard and mouse.

2. Execute/Run the Update Tool program with computer connected to radios via cable and

docking station, please wait for a while, you should see “USB Cable Connected” at the

bottom of the Update Tool.

3. If you do not see “USB Cable Connected”, please check if your computer has

successfully installed the programming cable driver.

4. Ensure the battery is full and inserted into the radio then turned ON the radio. Put the

radio onto docking/programming/charging station.

5. Click “Get Radio Information” button to read the current radio information and show on

the screen.

6. Observe a pop up show “Successfully get radio information”.

7. Ensure the radio model is the one you want to upgrade and with correct firmware version

which is R01.00.02 in this example. Do not proceed update if the radio is not the correct

model/firmware version.

8. Select “Restore radio’s personality” if you need to restore your previous configurations.

*** if “Restore radio’s personality” is selected when upgrading DTR600 from older FW

version to R01.02.02, “Enable Profile ID Pin” setting will be restored too. To change

“Enable Profile ID Pin” setting from disable/unchecked to enable/checked, user can only

change via CPS if need to restore previous configuration OR unselect “Restore radio’s

personality” to factory reset radio configurations when upgrading FW to R01.02.02.

9. Click the “update” button to update the radio to the new firmware.

***Do not disconnect and do not power down the radio during the upgrade

process.

10. A pop up will remind you on your update information and cautious. Click the “Yes”

button.

Andere Handbücher für DTR600

Dieses Handbuch passt für folgende Modelle

Andere Motorola Zwei-Wege-Funkgerät Handbücher

Motorola

Motorola CLS1450c Bedienungsanleitung

Motorola

Motorola CDM1250 Bedienungsanleitung

Motorola

Motorola TLKR T92 H2O Bedienungsanleitung

Motorola

Motorola Talkabout T62 Bedienungsanleitung

Motorola

Motorola Talkabout T62 Bedienungsanleitung

Motorola

Motorola T80 Bedienungsanleitung

Motorola

Motorola Talkabout T6202 Bedienungsanleitung

Motorola

Motorola FV750 series Bedienungsanleitung

Motorola

Motorola HT1250 Bedienungsanleitung

Motorola

Motorola XTNI Non-display Model Bedienungsanleitung

Motorola

Motorola ASTRO APX 6000XE Series Bedienungsanleitung

Motorola

Motorola APX 8000 Referenzhandbuch

Motorola

Motorola XT220 Bedienungsanleitung

Motorola

Motorola GP580 EX Bedienungs- und Wartungshandbuch

Motorola

Motorola TALKABOUT T82 Bedienungsanleitung

Motorola

Motorola MG160 Series Bedienungsanleitung

Motorola

Motorola APX 6000Li Bedienungsanleitung

Motorola

Motorola ASTRO APX 6500 Bedienungsanleitung

Motorola

Motorola CLP series Bedienungsanleitung

Motorola

Motorola GP3188 Bedienungsanleitung

Motorola

Motorola APX 6000XE 1 Bedienungsanleitung

Motorola

Motorola APX 6500 Bedienungsanleitung

Motorola

Motorola CLS1110 Bedienungsanleitung

Motorola

Motorola HT1250-LS+ Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Uniden

Uniden FRS550W Bedienungsanleitung

Crosley

Crosley RDR3500U Bedienungsanleitung

HME

HME XLR Series Bedienungsanleitung

ToooAir

ToooAir TA-M10 Bedienungsanleitung