Motorola AP-7131 Series Bedienungsanleitung

INSTALLATION

AP-7131 Access Point

Installation Guide

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.0 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.3 AP-7131 Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4 Mounting the AP-7131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.5 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.0 Basic AP-7131 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.1 Resetting the AP-7131 Password . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.2 Configuring "Basic" Device Settings . . . . . . . . . . . . . . . . . . . . . . . 24

3.3 Where to Go From Here? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

4.0 Regulatory Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.0 Waste Electrical and Electronic Equipment (WEEE). . . . . . 38

6.0 Motorola’s Enterprise Mobility Support Center . . . . . . . . . 40

Contents

MOTOROLA and the Stylized M Logo are registered in the US Patent &

TrademarkOffice.Symbolis aregisteredtrademarkofSymbolTechnologies,

Inc. All other product or service names are the property of their respective

Introduction 1

1 Introduction

As a standalone access point, the AP-7131 provides small and medium-sized businesses with a

consolidated wired and wireless networking infrastructure, all in a single device. The integrated

router, gateway, firewall, DHCP and Power-over-Ethernet (PoE) simplify and reduce the costs

associated with networking by eliminating the need to purchase and manage multiple pieces of

equipment.

The AP-7131 is also designed to meet the needs of large, distributed enterprises by converging the

functionality of a thick access point and thin access port into a single device. This mode enables the

deployment of a fully featured intelligent access point that can be centrally configured and managed

via a Motorola wireless switch in either corporate headquarters or a network operations center

(NOC). Additionally, compatibility with Motorola’s RF Management Suite allows you to centrally plan,

deploy, monitor and secure large AP-7131 deployments.

If new to the AP-7131 and access point technology, refer to the AP-7131 Product Reference Guide to

familiarize yourself with access point technology and the feature set exclusive to the Motorola

AP-7131. The guide is available, at http://support.symbol.com/support/product/manuals.do.

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:

NOTE Tips, hints, or special requirements that you should take note of.

CAUTION Care is required. Disregarding a caution can result in data loss or

equipment malfunction.

WARNING! Indicates a condition or procedure that could result in personal injury or

equipment damage.

AP-7131 Access Point: Installation Guide

1.2 Warnings

•Read all installation instructions and site survey reports, and verify correct equipment installation before

connecting the AP-7131 to its power source.

•Remove jewelry and watches before installing this equipment.

•Verify that the unit is grounded before connecting it to the power source.

•Verify that any device connected to this unit is properly wired and grounded.

•Connect all power cords to a properly wired and grounded electrical circuit.

•Verify that the electrical circuits have appropriate overload protection.

•Attach only approved power cords to the device.

•Verify that the power connector and socket are accessible at all times during the operation of the

equipment.

•Do not work with power circuits in dimly lit spaces.

•Do not install this equipment or work with its power circuits during thunderstorms or other weather

conditions that could cause a power surge.

•Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment

operation specifications.

1.3 Site Preparation

•Consult your site survey and network analysis reports to determine specific equipment placement, power

drops, and so on.

•Assign installation responsibility to the appropriate personnel.

•Identify and document where all installed components are located.

•Provide a sufficient number of power drops for your equipment.

•Ensure adequate, dust-free ventilation to all installed equipment.

•Identify and prepare Ethernet and console port connections.

•Verify that cable lengths are within the maximum allowable distances for optimal signal transmission.

Hardware Installation 3

2 Hardware Installation

An AP-7131 installation includes mounting the AP-7131 on a wall, ceiling T-bar or an above the ceiling

orientation, connecting the AP-7131 to the network (LAN or WAN port connection), connecting

antennas and applying power. Installation procedures vary for different environments.

An AP-7131 model access point has the following port designations:

• GE1/POE - LAN port

• GE2 - WAN Port

2.1 Precautions

Before installing the AP-7131 verify the following:

• Do not install in wet or dusty areas without additional protection. Contact a Motorola

representative for more information.

• Verify the environment has a continuous temperature range between -20° C to 50° C.

2.2 Package Contents

Check package contents for the correct model AP-7131 and applicable AP-7131 accessories. Each

available configuration (at a minimum), contains:

• AP-7131 model access point (accessories dependent on SKU ordered)

• AP-7131 Install Guide (this guide)

• China ROHS Compliance addendum

• Wall mount screw and anchor kit

• Accessories Bag (4 rubber feet and a LED light pipe and badge with label for above the

ceiling installations)

Contact the Motorola Support Center to report missing or improperly functioning items.

NOTE Some versions of the AP-7131 ship with a cover (facade) to protect the

access point or a 6-element MIMO antenna. The cover disconnects from

the access point as illustrated on the next page. When attached, LEDs

continue to illuminate through the cover.

AP-7131 Access Point: Installation Guide

2.3 AP-7131 Placement

For optimal performance, install the AP-7131 away from transformers, heavy-duty motors, fluorescent

lights, microwave ovens, refrigerators and other industrial equipment. Signal loss can occur when

metal, concrete, walls or floors block transmission. Install the AP-7131 in open areas or add access

points as needed to improve coverage.

Place the AP-7131 using the following guidelines:

• Install the AP-7131 at an ideal height of 10 feet from the ground.

• Orient the AP-7131 antennas vertically for best reception.

• Point the AP-7131 antennas downward if attaching to the ceiling.

Motorola recommends conducting a site survey to define and document radio interference obstacles

before installing the AP-7131 to maximize its radio coverage area.

Hardware Installation 5

2.3.1 AP-7131 Antenna Options

Motorola supports two antenna suites for the AP-7131. One antenna suite supporting the 2.4 GHz

band and another antenna suite supporting the 5 GHz band. Select an antenna model best suited to

the intended operational environment of your AP-7131.

Antenna connectors for single radio model AP-7131s are located on the same side of the access point

as the LAN and WAN port connections (GE1/POE and GE2). On single radio versions, the R-SMA

connectors can support both bands and should be connected to a R-SMA dual-band antenna or an

appropriate single band antenna. If necessary a R-SMA to R-BNC adapter (Part No. 25-72178-01) can

be purchased separately from Motorola.

R1 defines the AP-7131’s radio 1 antenna connectors and R2 defines the AP-7131’s radio 2 antenna

connectors.

Certain Rogue AP Detection features use a radio to perform dual-band scanning. The dedicated radio

should be connected to an appropriate dual-band dipole antenna (Part No. ML-2452-APA2-01).

AP-7131 Access Point: Installation Guide

The 2.4 GHz antenna suite includes the following models:

The 5 GHz antenna suite includes the following models:

For detailed specifications on the antennas available to the AP-7131, refer to the

AP-7131 Product Reference Guide or the Enterprise Wireless LAN Antenna Specification Guide. Both

guides are available at http://support.symbol.com/support/product/manuals.do.

Part Number Antenna Type Nominal Net Gain (dBi)

ML-2499-11PNA2-01R Wide Angle Directional 8.5

ML-2499-HPA3-01R Omni-Directional Antenna 3.3

ML-2499-BYGA2-01R Yagi Antenna 13.9

ML-2452-APA2-01 Dual-Band 3.0

ML-2452-PTA2M3X3-1 Facade with 6 Element

Antenna Module

2.0

ML-2452-PTA3M3-036 3 Port MIMO Antenna 3.0

NOTE An additional adapter is required to use ML-2499-11PNA2-01R and

ML-2499-BYGA2-01R model antennas. Please contact Motorola for more

information.

Part Number Antenna Type Nominal Net Gain (dBi)

ML-5299-WPNA1-01R Panel Antenna 13.0

ML-5299-HPA1-01R Wide-Band Omni-Directional

Antenna

5.0

ML-2452-APA2-01 Dual-Band 4.0

ML-2452-PTA2M3X3-1 Facade with 6 Element

Antenna Module

2.0

ML-2452-PTA3M3-036 3 Port MIMO Antenna 3.0

Andere Handbücher für AP-7131 Series

Inhaltsverzeichnis

Andere Motorola Drahtloser Zugangspunkt Handbücher

Motorola

Motorola WA840G Betriebsanleitung

Motorola

Motorola AP-7131 Series Anleitung zur Verwendung

Motorola

Motorola AP-6511 Bedienungsanleitung

Motorola

Motorola AP-7131 Series Installations- und Betriebshandbuch

Motorola

Motorola AP-650 Series Bedienungsanleitung

Motorola

Motorola WA840GP Bedienungsanleitung

Motorola

Motorola 5440AP - Canopy 5.4 GHz AP Betriebsanleitung

Motorola

Motorola NCAP-500 Series Bedienungsanleitung

Motorola

Motorola AP-650 Series Bedienungsanleitung

Motorola

Motorola AP 7161 Bedienungsanleitung

Motorola

Motorola AP-6521E Bedienungsanleitung

Motorola

Motorola MOTOwi4 25600 Handbuch

Motorola

Motorola AP-51XX Installations- und Betriebshandbuch

Motorola

Motorola CB3000 - Client Bridge - Wireless Access... Bedienungsanleitung

Motorola

Motorola AP-0622 Bedienungsanleitung

Motorola

Motorola AP 6522M Bedienungsanleitung

Motorola

Motorola WS2000 - Wireless Switch - Network Management... Bedienungsanleitung

Motorola

Motorola PTP 600 Series Bedienungsanleitung

Motorola

Motorola MOTOMESH Duo 4300-49 Bedienungsanleitung

Motorola

Motorola AP6562 Bedienungsanleitung

Motorola

Motorola AP6532 Bedienungsanleitung

Motorola

Motorola AP-51 Series Installations- und Betriebshandbuch

Motorola

Motorola AP-7131 Series Installations- und Betriebshandbuch

Motorola

Motorola MC-802 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung