Mount-It! MI-772 Bedienungsanleitung

English

Installation Instruction

UNPACKING INSTRUCTIONS

!Carefully open the carton, remove contents and lay out on cardboard or other

protective surface to avoid damage.

!Check package contents against the Supplied Parts List in the next page to assure

that all components were received undamaged. Do not use damaged or defective

parts.

!Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

!Install and operate this device with care. Please read this instruction before

installation, and carefully follow all instructions contained herein. Use proper safety

equipment during installation.

!Please call a qualified installation contractor for help if you don't understand these

directions or have any doubts about the safety of the installation.

Do not use this product for any purpose or in any configuration not explicitly specified

in this instruction. We hereby disclaims any and all liability for injury or damage

arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied Par ts List

(1) 48mm Pole-a (2) Side Vesa Plate

with Slip Set-c

(2)Arm Plastic

Cover-i

(8)M4x30 Bolt-m

(16)M4 Washer-k

(1)Allen Key-j

(2) Short Arm-d

(1) Arm Clamp-f (4)M6x25 Bolt-g (4)M6 Washer-h

(1) Arm Connect

Part-e

(8)M4 Space-n (2)M8x10 Bolt-o (2)Wire Clip-p

(1) Disconnected

“C” Clamp-b

CAUTION!

WARNING

!This monitor desktop mount must be securely

attached to the horizontal desk. If the mount is

not properly installed it may fall, resulting in

possible injury and/or damage.

(2)M10x15 Bolt-q

(8)M4x12

Thumb Bolt-l

Assemble the curved arm sets as the

diagram above, fasten the M6x25

Bolt(g) by provided Allen Key(j).

Insert the curved arm sets to pole,

fasten the M8x10 Bolt(o) by provided

Allen Key(j). Install the Wire Clip(p).

Step 2 Assemble the Arm Sets and Install it on the Pole

Step 1 Install the “C” Clamp According to the Desktop Thickness

The depth of “C” clamp can be changed in

three positions. Choose the proper depth

according to the thickness of your

desktop. Connect it by 2pcs M10x15

bolts(q), using the supplied Allen Key(j).

ghe

Step 3 Mount the Monitor to VESA Plate

For Curved Back Monitor

Step 4 Attach the Monitors to Arm Sets

Plastic Knob

Attaching the monitors to the curved arm sets, fixing the position by the plastic

knob. Install the Arm Plastic Cover-i as the above diagram.

For Flat Back Monitor

Step 5 Adjust the Tilting Angle and the Monitors Level

Fasten the grub screw to fix the tilting

angle by provided Allen Key(j).

grub screw

Bolt

By fasten or loosen the bolt on the

above diagram to adjust the level of

each monitor.

Step 6 Manage the Wires

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mount-It! Rack & Stand Handbücher

Mount-It!

Mount-It! MI-390 Bedienungsanleitung

Mount-It!

Mount-It! MI-390 Bedienungsanleitung

Mount-It!

Mount-It! MI-2041 Bedienungsanleitung

Mount-It!

Mount-It! MI-705 Bedienungsanleitung

Mount-It!

Mount-It! MI-4352LT Bedienungsanleitung

Mount-It!

Mount-It! MI-2291 Bedienungsanleitung

Mount-It!

Mount-It! MI-706 Bedienungsanleitung

Mount-It!

Mount-It! MI-7916 Bedienungsanleitung

Mount-It!

Mount-It! MI-7264 Bedienungsanleitung

Mount-It!

Mount-It! MI-5352T Bedienungsanleitung

Mount-It!

Mount-It! MI-850 Bedienungsanleitung

Mount-It!

Mount-It! MI-2757 Bedienungsanleitung

Mount-It!

Mount-It! MI-391 Bedienungsanleitung

Mount-It!

Mount-It! MI-386 Bedienungsanleitung

Mount-It!

Mount-It! TPM-MA09-24P Bedienungsanleitung

Mount-It!

Mount-It! MI-2171L Bedienungsanleitung

Mount-It!

Mount-It! MI-310 Bedienungsanleitung

Mount-It!

Mount-It! MI-754 Bedienungsanleitung

Mount-It!

Mount-It! MI-2789 Bedienungsanleitung

Mount-It!

Mount-It! MI-7610 Bedienungsanleitung

Mount-It!

Mount-It! 2781 Bedienungsanleitung

Mount-It!

Mount-It! MI-5761 Bedienungsanleitung

Mount-It!

Mount-It! MI-1753 Bedienungsanleitung

Mount-It!

Mount-It! MI-725 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung