Mount-It! 2781 Bedienungsanleitung

English

Installation Instruction

UNPACKING INSTRUCTIONS

!Carefully open the carton, remove contents and lay out on cardboard or other

protective surface to avoid damage.

!Check package contents against the Supplied Parts List in the next page to assure

that all components were received undamaged. Do not use damaged or defective

parts.

!Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

!Install and operate this device with care. Please read this instruction before

installation, and carefully follow all instructions contained herein. Use proper safety

equipment during installation.

!Please call a qualified installation contractor for help if you don't understand these

directions or have any doubts about the safety of the installation.

Do not use this product for any purpose or in any configuration not explicitly specified

in this instruction. We hereby disclaims any and all liability for injury or damage

arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied Par ts List

CAUTION!

WARNING

!The monitor desktop mount must be evenly positioned on a

stable horizontal surface. If the mount is not positioned in a

balanced manner, it may fall, resulting in possible injury

and/or damage. The optional desktop bolt may be used to

provide additional stability.

(1)Support Plate-j(1)M10 Bolt-i (1)M10 Washer-k (1)Spring Washer-l

(8)M4 Spacer-s(8)M4x12 Bolt-q (8)M4x30 Bolt-r

(1) Grommet Base

Plate-m (1)Wire Clip-n1 (1)Allen Key-o

(1)Wrench-p

Tools Required Phillips Screwdriver

(4)Wire Clip-n2

(1) Pole-a (1) Swivel Arm-c(1) Weighted Base-b

(2) VESA Plate-d (2) Nut-h

(3) M5x14 Bolt-e

Step 1 Install the Pole to the Desktop

Option A: Weighted Base Install

1. Install the Pole(a) to the Weighted

Base(b) using 3pcs M5x14 Bolts(e), and

tighten using the Allen Key(o), see Figure 1.

2. Optionally, you can drill a 10mm diameter

hole in your desk and secure using the

Support Plate (j), M10 Washer(k), Spring

Washer(l) and M10 Bolt(i). Fasten the M10

Bolt with provided Wrench(p), see Figure 2.

Figure 2

Option B: Grommet Base Install

If the existing grommet hole comes with a

plastic protector, remove it to ensure a flat

surface before installing the desk mount.

1. Install the Grommet Base Plate(m) to the

Pole(a) using 3pcs M5x14 Bolts(e), and

tighten using the Allen Key(o), see Figure 3.

2. Position the Pole(a) on the mounting

surface and secure using the Support Plate

(j), M10 Washer(k), Spring Washer(l) and

M10 Bolt(i). Fasten the M10 Bolt using

provided Wrench(p), see Figure 4.

Figure 3

Figure 4

Existing Grommet Hole Installation

Figure 1

Step 1 Install the Pole to the Desktop

Self Drilled Grommet Hole Installation

Option B: Grommet Base Install

1. Position the Pole(a) on the mounting

surface and mark the center hole. Drill a 3/8"

(10mm) diameter hole at the marked position

through the mounting surface.

2. Install the Grommet Base Plate(m) to the

Pole(a) using 3pcs M5x14 Bolts(e), and

tighten using the Allen Key(o), see Figure 5.

3. Position the Pole(a) on the mounting

surface and secure using the Support Plate

(j), M10 Washer(k), Spring Washer(l) and

M10 Bolt(i). Fasten the M10 Bolt using

provided Wrench(p), see Figure 6.

Figure 5

Figure 6

Step 2 Install Arm to the Pole

Install Swivel Arm(c) to the

Pole(a). Fasten the bolt with

supplied Allen Key(o). Attach

the Wire Clip(n1,n2) to the

Pole(a) and Swivel Arm(c).

Step 3 Attach the VESA Plate to the Monitor

For Monitor with Curved or

Recessed Back

Step 4 Slide the Monitor onto the Head of Swivel Arm

Install the security Nut(h). Make

sure the security nut is installed

before you rotate the monitor.

Slide the monitor onto the head of

Swivel Arm(c) as shown in the

above diagram.

For Monitor with Flat Back

Step 6 Make the Necessary Adjustments and Manage the Wires

Step 5 Fix the Tilt Angle and Adjust the Level of Monitor

Use the supplied Allen Key(o) to make

the necessary adjustments.

Tighten the bolt with the supplied Allen

Key(o) to fix the tilt angle.

Fix the tilt angle

Thank you for choosing our products!

Ignore this step if

monitors are level

If one monitor is lower, remove the Nut(h) and

turn the bolt counter-clockwise with supplied

Allen key(o) to raise the monitor. Install the

Nut(h) after the adjustment.

Manage the wires and store the Allen

keys(o) in Wire Clip(n1) for future use.

Inhaltsverzeichnis

Andere Mount-It! Rack & Stand Handbücher

Mount-It!

Mount-It! MI-772 Bedienungsanleitung

Mount-It!

Mount-It! MI-391 Bedienungsanleitung

Mount-It!

Mount-It! MI-4200 Bedienungsanleitung

Mount-It!

Mount-It! MI-2041L Bedienungsanleitung

Mount-It!

Mount-It! MI-2171L Bedienungsanleitung

Mount-It!

Mount-It! MI-7610 Bedienungsanleitung

Mount-It!

Mount-It! MI-7931 Bedienungsanleitung

Mount-It!

Mount-It! MI-5761 Bedienungsanleitung

Mount-It!

Mount-It! MI-706 Bedienungsanleitung

Mount-It!

Mount-It! MI-763 Bedienungsanleitung

Mount-It!

Mount-It! MI-1753 Bedienungsanleitung

Mount-It!

Mount-It! MI-394 Bedienungsanleitung

Mount-It!

Mount-It! MI-2291 Bedienungsanleitung

Mount-It!

Mount-It! MI-725 Bedienungsanleitung

Mount-It!

Mount-It! MI-390 Bedienungsanleitung

Mount-It!

Mount-It! MI-7916 Bedienungsanleitung

Mount-It!

Mount-It! MI-2751 Bedienungsanleitung

Mount-It!

Mount-It! MI-5352T Bedienungsanleitung

Mount-It!

Mount-It! MI-4882 Bedienungsanleitung

Mount-It!

Mount-It! MI-2789 Bedienungsanleitung

Mount-It!

Mount-It! MI-2757 Bedienungsanleitung

Mount-It!

Mount-It! MI-7264 Bedienungsanleitung

Mount-It!

Mount-It! MI-2041 Bedienungsanleitung

Mount-It!

Mount-It! MI-850 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung